• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.3A
• /
• pp.131-138
• /
• 2012

This paper aims to present accurately analytical modeling method for underpinning using uncertainty reduction, obtained from comparison between numerical analysis and Site measuring data during construction and service stages. Combination of various conditions should be considered for using numerical analysis to predict the behavior of the structure accurately, even though complexly considered the conditions, real construction should be secured the stability by applying the actual instrument measurement data because predicted results are including the considerable uncertainty. In order to secure the stability during construction, the real time instrument measurements together with numerical analysis results performed before construction state are complementary used actively. From the results of this study, the significant settlements are occurred not only in underpass structure of adjacent excavation area but also in the permanent steel pipe structures were analyzed. From the site measurement results of underpass settlement, the settlements are occurred in every stages of excavation, furthermore observed tendency is asymmetrical excavation patterns are settled more than symmetrical excavation patterns. The essential consideration points for numerical analysis are construction sequence, the direction of the existing facilities, the methods of elements modeling, the applied factors for nature of material and different results would be occurred depending upon inputting the above factors.

• Composites Research
• /
• v.24 no.1
• /
• pp.1-9
• /
• 2011

This paper presents an experimental and numerical study on composite tubes for the energy absorber of the high-speed train. The purpose of the experimental study is to find out which lay-up is the best lay-up for the energy absorber. Four lay-ups were tested using quasi static method: $[0/45/90/-45]_4$, $[0]_{16}$, $[0/90]_8$, $[0/30/-30]_5$. Two triggering methods were used to create initial damage and guarantee the progressive collapse mode: bevel edge and notch edge. As a result, $[0/45/90/-45]_4$ lay-up was find out the best lay-up among the laminates being tested. In the numerical study, a parametric analysis was done to find out the most proper way to simulate the quasi static test of a composite tube using LS-DYNA program. A single composite tube was modeled to be crashed by a moving wall. Comparison between simulation and experiment was done. Reasonable agreement between experiment and analysis was obtained. Dealing with parameter TFAIL and the mass scaling factor, this parametric study shows the ability and the limitation of LS-DYNA in modeling the quasi static test for the composite tube.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.5
• /
• pp.301-310
• /
• 2003

In order to design accurately sand compaction pile (SCP) method with low replacement area ratio, it is important to understand the mechanical interaction between sand piles and clays and its mechanism during consolidation process of the composition ground. In this paper, a series of numerical analyses on composition ground improved by SCP with low replacement area ratio were carried out, in order to investigate the mechanical interaction between sand piles and clays. The applicability of numerical analyses, in which an elasto-viscoplastic consolidation finite element method was applied, could be confirmed comparing with results of a series of model tests on consolidation behaviors of composition ground improved by SCP. And, through the results of the numerical analyses, each mechanical behavior of sand piles and clays in the composition ground during consolidation was elucidated, together with stress sharing mechanism between sand piles and clays.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.3
• /
• pp.281-288
• /
• 2016

The ballistic performance data of composite materials is distributed due to material inhomogeneity. In this paper, the uncertainty in residual velocity is obtained experimentally, and a method of predicting it is established numerically for the high-speed impact of a bullet into laminated composites. First, the failure strain distribution was obtained by conducting a tensile test using 10 specimens. Next, a ballistic impact test was carried out for the impact of a fragment-simulating projectile (FSP) bullet with 4ply ([0/90]s) and 8ply ([0/90/0/90]s) glass fiber reinforced plastic (GFRP) plates. Eighteen shots were made at the same impact velocity and the residual velocities were obtained. Finally, simulations were conducted to predict the residual velocities by using the failure strain distributions that were obtained from the tensile test. For this simulation, two impact velocities were chosen at 411.7m/s (4ply) and 592.5m/s (8ply). The simulation results show that the predicted residual velocities are in close agreement with test results. Additionally, the modeling of a composite plate with layered solid elements requires less calculation time than modeling with solid elements.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.12 no.6
• /
• pp.451-461
• /
• 2010

Utilization of the fiber reinforced polymer (FRP) material has been enlarged as a substitution material to the general construction materials having certain long-term problems such as corrosion, etc. However, it could be difficult to apply the FRP material, which has a linear shape generally, to an arch-shaped tunnel structure. Therefore, an attempt has been made in this study to develop a device to form a designed cross section of FRP material by pulling out with a curvature. A sample of the circled FRP product was successfully produced and then the sample has been tested to identify its physical characteristics. Then, intensive feasibility studies on the circled FRP panel to be used for a tunnel lining structure have been carried out by numerical analyses. As a result, it appears that the new circled FRP-concrete composite panel has a high capability to be used for a tunnel lining material without any structural problem.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.11
• /
• pp.1587-1592
• /
• 2010

The effects of specimen geometry and loading conditions on the stress distribution in a sandwich specimen under combined loads are investigated by elastic finite element analysis. A commercial software NASTRAN is used in plain-strain two-dimensional finite element analysis of sandwich specimens; the analysis was performed for three different specimen shape factors and four different combined displacement conditions. The results of computational analysis suggest that the effect of the combined displacement angle, which is defined as the ratio of the shear displacement to the normal displacement, on the size of the non-homogeneous stress distribution is observed only in the case of the shear stress and von Mises stress. Also as the combined displacement angle increases, the size of the nonhomogeneous stress distribution decreases in the case of the shear stress and increases in the case of the von Mises stress. In addition, as the specimen shape factor, which is defined as the ratio of the specimen length to the height, increases, the size of the non-homogeneous stress distribution under combined displacement conditions decreases significantly.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.178-178
• /
• 2015

본 연구는 복단면구조의 수로에서 이차류 및 흐름특성을 비교, 관측하는 것이며 이러한 흐름특성을 연구하기 위해 폭 1.2 m, 길이 14 m, 높이 0.6 m인 실험수로를 이용하여 수심비 0.25 및 0.40 조건에서 0.05, 0.10 CMS의 유량으로 총 4가지 조건으로 실험을 진행하였고 이를 비교하기 위해 3차원 수치해석모형인 FLOW-3D를 이용하여 수치해석결과와 수리실험결과를 비교하였다. 주수로 및 홍수터의 수심과 유량의 조건이 각각 다른 4가지 조건 별 변화를 수리실험과 수치해석을 통해 분석한 결과, Shino & Knight(1991)에서의 언급한 내용과 부분적으로는 동일한 결과를 보였으나, 수치해석 부분에서의 결과와는 차이를 보였다. 일반적으로 복단면구조에서 발생하는 이차류는 수위 및 수심별 유속의 차이에서 발생하는 연직방향의 유속의 영향과 복단면과 주수로의 구조적 차이에서 발생하는 횡방향 유속의 영향과 같은 복합적인 작용으로인해 발생하게 되지만 수치해석의 결과에서는 수위차이에 의한 연직방향의 유속이 횡방향 유속보다 지배적인 결과를 보여 본 연구 중 고유속의 조건에서는 이차류의 형성이 수리실험 및 기존 연구결과들과 차이를 보였다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.5
• /
• pp.1611-1619
• /
• 1991

본 연구에서는 Hilton과 Sih의 경우를 확장 적용하여 Fig. 1(b)와 같이 탄성 층 내부에 존재하는 중앙균열선단의 응력확대계수 산출을 위하여 균열부위를 제외하고 는 섬유층과 레진층이 완전히 접착되었다고 가정한 모델을 다음과 같이 설정하였다. 중앙균열을 내재하고 있는 복합재료의 역학적 거동을 해석하기 위하여, 접착레진을 주 로하는 층(resin rich layer)을 중심으로 하여 상하 각1개의 섬유 (fiber)층과 균질한 특성을 갖는 복합재료의 층으로 단순화 하였으며, 이러한 단순화는 적층재에서의 균열 주위의 국부응력을 해석하기 위한 것으로서 복합재료는 레진층이나 섬유층에 비하여 매우 두꺼우므로 반무한체로 이상화 하였다. 선형탄성 이론에 의하여 혼합 경계조건 문제(mixed boundary value problem)로 부터 제2종 Fredholm적분방정식(fredholm int- egral equation of a second kind)을 유도하였으며 수치해석적인 방법에 의하여 응력 확대계수를 구하였다.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.1 no.2
• /
• pp.51-58
• /
• 2010

This work examines the identification of stiffness reduction in damaged reinforced concrete bridges under moving loads, and carries out the performance assessment after repairing using advanced composite materials. In particular, the change of stiffness in each element before and after repairing, based on the Microgenetic algorithm as an advanced inverse analysis, is described and discussed by using a modified bivariate Gaussian distribution function. The proposed method in the study is more feasible than the conventional element-based method from computation efficiency point of view. The validity of the technique is numerically verified using a set of dynamic data obtained from a simulation of the actual bridge modeled with a three-dimensional solid element. The numerical examples show that the proposed technique is a feasible and practical method which can inspect the complex distribution of deteriorated stiffness although there is a difference between actual bridge and numerical model as well as uncertain noise occurred in the measured data.

• Korean Journal of Optics and Photonics
• /
• v.25 no.4
• /
• pp.207-215
• /
• 2014

In this paper the radial stiffness associated with stacking sequence effects, and the dimensional stability issue associated with thermally induced surface deformation in quasi-isotropic laminates due to the effect of stacking sequence and additional resin layer technique, are numerically investigated. Finally, the influence of surface resin layer techniques for fiber print-through mitigation in a composite mirror is tested for evaluation of surface accuracy across varying thermal conditions.