• Journal of Korean Society of Forest Science
• /
• v.108 no.3
• /
• pp.429-439
• /
• 2019

The objectives of this study were to gauge the extent of the forestry business through establishing the definition of forestry industry from the perspective of economic convergence and to analyze key components that affect each growth phase of a forestry business entity by classifying them. A total of 1,397 "sixth-sector industry" management entities were certified by the Ministry of Agriculture, Food, and Rural Affairs in South Korea from 2012-2017. Of these, 259 (18.5%) were in the forestry sector. In this study, the 259 forestry management entities were further classified into three phases based on sales distribution: entrance, development, and maturity. The entrance phase (<100 million KRW), development phase (>100 million and <1 billion KRW), and maturity phase (>1 billion KRW) constituted 33.2%, 55.4%, and 12.4% of the total 259 entities, respectively. The results showed that most of the management entities were either in the entrance or development phases, and only a small portion was in the maturity phase. To identify the key variables that affect each of the phases, chi-square analysis was used. We designed the "sixth-sector industry" type as an independent variable, whereas selected region, business organization, manager age group, forest product, processing type, and service type were designated as dependent variables. The results of the analysis showed that the processing and service types influenced all three developmental phases. Moreover, as the phase advanced, processing type showed a higher proportion of health-functional ingredients, such as powder or extract from forest products, which enable to develop and produce a variety of products. Service type also changed from simple experience to integrated experience tourism and finally to tourism education. Distribution and sales channel also turned out to be a significant factor during the development phase. This study provides the basic information needed to guide government support in the implementation of a formal forestry business through convergence as well as to increase the efficiency of business management.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.10
• /
• pp.63-71
• /
• 2011

We present a method to modify the recognition of neural networks by the fuzzy inference in a handwritten digit recognition with large deformations, and we verified the method by the experiment. The neural networks take long time in learning and recognize 100% on the learning pattern. But the neural networks don't show a good recognition on the testing pattern. So, we apply the modified method as the fuzzy inference. As a result, the recognition and false recognition of neural networks was improved 90.2% and 9.8% respectively at 89.6% and 10.4% initially. This approach decreased especially the false recognition on digit 3, 5. We used the density of digit to extract the fuzzy membership function in this experiment. But, because the handwritten digit have varified input patterns, we will get a better recognition by extracting varifed characteristics and applying the composite fuzzy inference. We also propose the application of fuzzy inference on matching the input pattern, than applying strictly the fuzzy inference.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.12 no.4
• /
• pp.85-94
• /
• 2004

Waste wood-plastic composite panels are made on different hot press molding conditions, and tested for apparent density, water absorption, expansion in thickness and flexural strength. From the test results, regardless of molding temperature and molding time, the apparent density of the composite panels is increased with an increase in the molding pressure, while their water absorption is decreased with an increase in the molding pressure. The flexural strength of the composite panels is markedly increased with increasing molding pressure, molding temperature and molding time, and tends to become nearly constant at a molding temperature of $120^{\circ}C$ and a molding time of 15min.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.49.1-49.1
• /
• 2009

최근 손상된 생체조직의 재생 또는 대체를 위하여 다공성의 지지체(scaffold)를 이용하는 연구가 활발히 이루어져 왔다. 지지체 재료는 조직 재생을 목적으로 하는 경우에는 생분해성 고분자, 생흡수성 세라믹스 또는 이들의 복합재료가 사용되고, 조직 대체를 목적으로 하는 경우에는 금속 또는 세라믹스 재료가 단독으로 사용된다. 현재 경조직 대체를 위한 임플란트 재료로 사용되고 있는 금속재료 중 대부분이 타이타늄 또는 타이타늄 합금이다. 타이타늄은 비강도, 내식성이 우수하며, 생체 내 환경에서 부동태피막 재생 속도가 빠르고, 섬유상 결체조직 형성 두께가 얇아 생체의료용 소재로서 각광을 받고 있다. 다공성 타이타늄은 기존 타이타늄 소재의 장점에 다공체의 구조적인 특성을 부가하여 하중을 받는 골 결손부에 사용될 경우 뼈와의 탄성계수 차이에서 기인하는 응력차폐(stress shielding) 효과를 최소화할 수 있고, 다공체 내부로 골조직 성장을 유도할 수 있어 지지체와 골조직이 일체화되는 골융합 효과의 극대화를 기대할 수 있다. 본 연구에서는 기공 구조를 다양하게 제어할 수 있고, 3차원적 연결 기공구조를 만들 수 있는 적층조형(layer manufacturing) 기술을 이용하여 3차원 다공성 타이타늄 지지체를 제조하였으며, 이에 대한 세포독성, 조골세포 증식능 등 in vitro 생체적합성을 평가하고, Rat model 을 이용한 in vivo 생체적합성을 평가하였다. 또한 지지체의 골조직 재생 유도성의 증대를 위한 생체활성처리 영향도 분석 평가하였다.

• Computational Structural Engineering
• /
• v.8 no.4
• /
• pp.75-85
• /
• 1995

The purpose of the present study is to develop a computer program which can be used to analyze prestressed concrete structures containing either bonded or unbonded tendons. To accomplish this, first, the concrete, nonprestressed, and prestressed steels are modeled with cyclic constitutive laws to take into account the various loading effects. Then, the hybrid-type element method is derived to improve the computations capability of stresses and strains, especially for the unbonded tendon. Since it allows one to determine the cross-sectional deformations in an element without any assumptions for its deformed shape, the element length can be much longer than that of the conventional finite element method. In order to achieve such a long element, various integral schemes are examined to implement them into the program. Then, the computational method for prestressing effects is developed consistently with the analytical method for the structure. Finally, analytical studies for actual tests were carried out to verify the program developed in this study.

• Membrane Journal
• /
• v.8 no.1
• /
• pp.29-41
• /
• 1998

Thin-film composite reverse osmosis membranes of aromatic polyamides were prepared by the interfacial polymerization. Aromatic polyamides as active skin layer were made from the interfacial polymerization of MPD(m-phenylene diamine) in the aqueous and TMC(trimesoyl chloride) in HCFC(1,1-dichloro-1-fluoroethane) organic solvent. The performances of the various reverse osmosis composite membranes prepared by changing processing variables were examined. The performance of membrane manufactured by batch system was varied with organic solvent, monomer concentration, dipping time, heat treatment temperature, acid acceptor, ethanol post treatment, and acid post treatment. Ethanol post treatment was the most dominant factors in increasing permeate amount, while the monomer concentration and dipping time were the main factors in increasing selectivity. The spiral-wound module was produced with the membrane prepared at optimum condition of the continuous process. Comparing the performance of this membrane module made here with that of commercial membrane module, the permeate flux was increased by 33% while the rejection was decreased by 5%.

• Journal of KIISE:Software and Applications
• /
• v.31 no.2
• /
• pp.235-244
• /
• 2004

We propose a format of a binary phrase structure grammar with composite labels. The grammar adopts binary rules so that the dependency between two sub-trees can be represented in the label of the tree. The label of a tree is composed of two attributes, each of which is extracted from each sub-tree so that it can represent the compositional information of the tree. The composite label is generated from part-of-speech tags using an automatic labeling algorithm. Since the proposed rule description scheme is binary and uses only part-of-speech information, it can readily be used in dependency grammar and be applied to other languages as well. In the best-1 context-free cross validation on 31,080 tree-tagged corpus, the labeled precision is 79.30%, which outperforms phrase structure grammar and dependency grammar by 5% and by 4%, respectively. It shows that the proposed rule description scheme is effective for parsing Korean.

• Journal of Korean Home Economics Education Association
• /
• v.35 no.3
• /
• pp.135-149
• /
• 2023

The purpose of this study is to develop and implement an integrated course model that centers around the subject of Home Economics Education Curriculum and Teaching Methods and its pedagogical approaches, as well as the subject of Chinese Language and Literature Curriculum and Teaching Methods and its pedagogical methods. This study aims to provide a framework to prepare pre-service teachers to effectively address a variety of educational issues in future educational settings. To achieve these objectives, the study utilizes Fogarty's connected model as a guiding framework to explore the impact of the integrated curriculum on fostering collaborative and divergent thinking among students. The findings of this research confirm that this model not only cultivates interdisciplinary competencies among course participants but also goes beyond the mere transmission of knowledge to build the capacities needed for forming an educational community, thereby increasing course satisfaction. Additionally, the study substantiates the importance of learner-centered strategies, cooperative learning, and diverse evaluation mechanisms. Such an integrated course model has the potential to revolutionize not only pre-service teacher education but also to be applicable in in-service teacher training, thus contributing to solving a broader range of educational issues.

• Composites Research
• /
• v.34 no.1
• /
• pp.23-29
• /
• 2021

Commercialized carbon fiber obtained from polyacrylonitrile(PAN) precursor is subjected to oxidation stabilization at 180 to 300℃ in air atmosphere and carbonization process at 1600℃ or lower in inert gas atmosphere. Both of these processes use a lot of time and high energy, but are essential and important for producing high-performance carbon fibers. Therefore, in recent years, an alternative stabilization technology by being assisted with various other energy sources such as plasma, electron beam and microwave which can shorten the process time and lower energy consumption has been studied. In this study, the PAN precursor was stabilized by using plasma treatment and heat treatment continuously. The morphology, structural changes, thermal and physical properties were analyzed using Field emission scanning electron microscopy(FE-SEM), X-ray diffraction(XRD), Fourier transform infrared(FT-IR), Thermogravimetric analysis(TGA) and Favimat.

• Current Industrial and Technological Trends in Aerospace
• /
• v.9 no.1
• /
• pp.139-149
• /
• 2011

The combustion chamber and nozzle of a liquid rocket engine need thermal protection against the high temperature combustion gas. The nozzle extension of a high-altitude engine also has to be compatible with high temperature environment and several kinds of cooling methods including gas film cooling, ablative cooling and radiative cooling are used. Especially for an upper-stage nozzle extension having a large expansion ratio, the weight impact on the launcher performance is crucial and it necessitated the development of light-weight refractory material. The present survey on the nozzle extension materials employed in the liquid rocket engines of USA, Russia and European Union has revealed a trend that the heavier metals like stainless steels and titanium alloys are being substituted with light weight carbon fiber or ceramic matrix composite materials.