• Journal of the Institute of Convergence Signal Processing
• /
• v.25 no.2
• /
• pp.86-93
• /
• 2024

This study evaluates the stability of a 4.99-ton small coastal fishing boat using data interpreted according to the second-generation intact stability criteria of the International Maritime Organization (IMO). The focus is on the ship's behavior under surfriding/broaching conditions during sea navigation, ensuring compliance with international standards. The data processing procedures presented apply stricter criteria than the first-generation intact stability standards to assess the ship's intact stability in waves. However, if the vessel deviates from its standard condition, a separate intact stability assessment based on actual loading conditions is necessary. The surfriding/broaching data processing procedures utilized a program developed by the Shipbuilding and Ocean Equipment Research Center at Kunsan National University. The results were analyzed and compared in detail according to the conditions, parameters, and criteria used for the calculations. Additionally, the study presents the results of Level 1 and Level 2 assessments according to IMO regulations, providing a parametric analysis of the small coastal fishing boat's stability. This allows for the evaluation of intact stability in hydrodynamic motion scenarios.tract.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1998.06a
• /
• pp.1184-1187
• /
• 1998

• Proceedings of the KSEEG Conference
• /
• 2000.04a
• /
• pp.123-123
• /
• 2000

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.11
• /
• pp.1281-1286
• /
• 2008

The PSK carrier signal recovery circuit using a six-port phase correlator was analyzed and the circuit structure is proposed in this paper. The proposed carrier signal recovery circuit that is made of reflection element and six-port phase correlator, which is comprised of a power divider and three hybrid branch line couplers, give a simple structure and can be fabricated without no difficulty. The circuit recovers the carrier signal of BPSK and QPSK modulation signal. The proposed scheme can be utilized as a basis structure for high-mode PSK carrier signal recovery. By simulation results, the recovered signal by the proposed circuit shows a good carrier signal characteristic with CW signal of a constant phase($23.4^{\circ}$) and ${\pm}0.8^{\circ}$ phase error due to glitch conditions.

• Journal of Korea Multimedia Society
• /
• v.3 no.5
• /
• pp.461-469
• /
• 2000

A wavelet analysis in a field of analytics is to create a reconstruction theorem of Plancherel form. And a series of wavelet is to create a discrete is to create a discrete reconstruction theorem for a frame theory and a multiresolution analysis theory. As a generation of reconstruction theorem, a wavelet correspond to it is generated. That is to be like a basic wavelet which is satisfied an admissibility condition in CWT and a Daubechies wavelet using MRA in wavelet series and a Meyer wavelet using a frame theory. In this paper, we discover a discrete reconstruction theorem which is superior to a conventional discrete reconstruction theorem by extending admissibility condition used in CWT and develop a New $L^1$-wavelet group. A new $L^1$-wavelet is applied to a signal reconstruction and a signal analysis in time-frequency region.

• 한국HCI학회:학술대회논문집
• /
• 2008.02a
• /
• pp.813-816
• /
• 2008

In this research we present a method to reconstruct the casting flow simulation result as a 3D model and visualize it on a VR display. First, numerical analysis of heat flow is performed using an existing commercial CAE simulation software. In this process the shape of the original design model is approximated to a regular rectangular grid. The filling ratio and temperature of each voxel are recorded iteratively by predefined number of steps starting from pouring the melted metal into a mold until it is entirely filled. Next we reconstruct the casting by voxels using the simulation result as an input. The color of voxel is determined by mapping the colors to temperature and filling ratio at each step as the flow proceeds. The reconstructed model is visualized on the Projection Table which is one of horizontal-type VR display. It provides active stereoscopic images.

• Ecology and Resilient Infrastructure
• /
• v.3 no.1
• /
• pp.1-7
• /
• 2016

River restoration has recently progressed in consideration of ecological functions along with flood controls and conservation. For river restorations that consider ecological health and diversity, it is important to contemplate the recovery of hydraulic and hydrologic connectivity in isolated spaces by longitudinal structures. In this study, as a first step for the provision of hydraulic and hydrologic data, which is necessary for the ecological connection analysis in isolated spaces, we developed a one-dimensional numerical model for rainfall runoff and channel routing and applied it to the Cheongmi watershed. The developed numerical model can simulate hydraulic and hydrologic analysis at the same time using the rainfall data. Numerical results were compared with observed data and other numerical results. As a result, a very reasonable agreement is observed. The results of this study will be improved so that the long-term hydrologic and hydraulic analysis is possible to predict ecological change.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.4
• /
• pp.1361-1375
• /
• 2013

The design flow considering nonstationarity is estimated to determine the design flood related to hydraulic structure quantitatively based on the design process for stream restoration in the Mokgamcheon watershed proposed by Lee et al. (2011). The purpose of this research is to suggest new ways that the design flood was calculated considering nonstationarity at the Mokgamcheon watershed. Storm-unit hydrograph method to calculate design flood and direct frequency analysis were applied and nonstationarity was considered for the frequency analysis through extRemes toolkit developed at NCAR (National Center for Atmospheric Research). Although the method of direct flood frequency analysis due to dealing with flowrates directly has a more reliable than strom-unit hydrograph method, as a result, the method of direct flood frequency analysis underestimated the design flood than strom-unit hydrograph method due to the characteristics of the flow data. Therefore, the flood of storm-unit hydrograph method (100 years frequency) was determined as the design flood in the Mokgamcheon watershed.

• Journal of Korean Society for Geospatial Information Science
• /
• v.23 no.2
• /
• pp.59-67
• /
• 2015

When planning for streams, adequate and definite flood control should be in the primary consideration of the planner; likewise, flood control is the basic prerequisite for the recent river restoration taking place nationwide. Planning 'safe' streams and rivers that are predictable and controllable begins from accurate survey data. In this research, we will create streams in 3D terrain models and apply them through hydraulic analysis and restoration using smart geospatial information. This process allows the extraction of more accurate data regarding streams and rivers, which makes possible precise hydraulic analysis that is superior in details to the conventional methods. The study also proposes optimal vertical section interval for efficient data processing on hydraulic analysis, applicable when LiDAR data is utilized on hydraulic analysis of urban streams. The study proposes 3D design plan and various applications for spatially planning and restoring rivers and streams.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.12
• /
• pp.192-199
• /
• 2020

The blower erosion phenomenon was investigated to develop a long-life blower with a volume flow rate of 10,000 ㎥/min with the required total pressure efficiency of 83% or more. The blower performance and blower erosion were predicted through numerical analysis by computational fluid dynamics(CFD). The conditions used for numerical analysis were an air volume of 16,200 ㎥/min, a rotation speed of 893 rpm, and a temperature of 330℃. The specific gravity, particle size, and amount of the dust was 3.15, 90 ㎛~212 ㎛, and is 265 kg/min, respectively. To examine the effects of a dust deflector on erosion, erosion analysis was performed by comparing the models with and without a dust deflector. Numerical analysis showed that when the dust deflector is installed, the average tended to decrease by 167% in the impeller and 133% in the boss. CFD using the Finne's model for erosion revealed a parallel restitution coefficient of 1 and a perpendicular restitution coefficient of 0.1. The blower performance of case 5 was 691.7 mmAq, and the efficiency was 83.3% when the rotation speed and the air volume flow rate were 880 rpm and 16,200 ㎥/min, respectively.