• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.3
• /
• pp.111-119
• /
• 2022

The increasing sectional stiffness and inducing prestress method of continuous steel box girder using modular CFT members use the restoring force of the CFT module generated from removing the prestressing bars in the CFT module after integrating the prestressed CFT module with the lower steel plate of the steel box girders as a prestressing force. The integrated CFT module in the steel box girder can improve the sectional stiffness of the continuous steel box girder section. To examine the applicability of the introduction of prestressing to the integrated steel box girder using the CFT module, in this study, inducing prestressing tests were conducted using CFT modules for steel plate specimens simulating the lower steel plate of the continuous steel box girder, and FE analyses were conducted for inducing prestressing tests. In addition, to confirm the effect of inducing prestress to the actual steel box girder and increasing sectional stiffness by the CFT modules, FE analyses for the actually applicable continuous steel box section were carried out depending on prestressing force and sectional conditions of the CFT modules, FE analysis results were compared.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.15 no.6
• /
• pp.37-47
• /
• 2005

Recently, the malicious e-mail worm-viruses have been widely spreaded over the Internet. If the recipient opens the e-mail attachment or an e-mail itself that contains the worm-virus, the worm-virus can be activated and then cause a tremendous damage to the system by propagating itself to everyone on the mailing list in the user's e-mail package. In this paper, we have designed and implemented two methods blocking e-mail worm-viruses. In the fist method, each e-mail is transmitted only by sender activity such as the click of button on a mail client application. In the second one, we insert the two modules into the sender side, where the one module transforms a recipient's address depending on a predefined rule only in time of pushing button and the other converts the address reversely with the former module whenever an e-mail is sent. The lader method also supports a polymorphism model in order to cope with the new types of e-mail worm-virus attacks. The two methods are designed not to work for the e-mail viruses. There is no additional fraction on the receiver's side of the e-mail system. Experimental results show that the proposed methods can screen the e-mail worm-viruses efficiently with a low overhead.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.552-555
• /
• 2010

In this paper, we propose a context-aware system using wireless multi sensor module to monitor the state for industrial factory environment. Wireless multi sensor module combines sensing values which are collected from each acceleration, pressure, temperature and gas sensors. Moreover, it delivers this data to server after being encoded by RS code. Thereafter, RS decoder decodes the values that are received from wireless multi sensor module and fixes errors which occur in wireless communication. Based on decoded data, context-aware algorithm sets critical range and compares it to the sensing values, if the sensing values are out of the range, an event occurs by the algorithm. At the same time, if there is another sensing value which is out of the range for standby time T seconds, the algorithm orders 3 steps-alarm to occur depending on each situation. Through this system, it becomes eventually possible to monitor machines' condition effectively. From the simulation, we confirm that this system is efficient to status monitoring of industrial automation equipment.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.3B
• /
• pp.305-313
• /
• 2010

River restoration or rehabilitation should be conducted in a way to maximize the channel stability with natural river configuration close to the equilibrium condition considering divers aspects of fluvial hydraulics, erosion and sedimentation, fluvial geomorphology, and ecological environment and to minimize the maintenance work. Therefore, the channel stability evaluation for present condition based on the equilibrium channel concept should be preceded for the river restoration project. Methods for equilibrium channel theory have generally been developed following either analytical regime theory or empirical regime theory. The main purpose of this paper is to evaluate the stability of present channel condition for the section of abandoned channel restoration in Cheongmi Stream using the Stable channel Analytical Model (SAM) and equilibrium hydraulic geometry equations. The results of analytical and empirical regime theories should provide fundamental and essential information to design the stable channel geometry. As a calculation result of Copeland's method for the study reach, the equilibrium channel has a narrower channel width, deeper water depth, and more gentle slope than the present channel geometry. As results of equilibrium hydraulic geometry equations, predicted equilibrium widths are less than the channel width in the field. It is represented that the current bed slope must be gentle to reach the equilibrium condition according to the results of Julien and Wargadalam method.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.6
• /
• pp.609-617
• /
• 2014

Even though the variable pitch control of a wind turbine blade is known as an effective component for power control over the rated wind speed, it has limited applicability to small wind turbines because of its relatively high cost on the price of small wind turbine. Instead, stall control is generally applied in the blade design without any additional cost. However, stall delay can frequently be caused by high turbulence around the turbine blade, and it can produce control failures through excessive rotational speed and overpowering the electrical generator. Therefore, a passive pitch control module should be considered, where the pitch moves with the aerodynamic forces of the blade and returns by the elastic restoring force. In this study, a method to calculate the pitch moment, torque, and thrust based on the lift and drag of the rotating blade wing was demonstrated, and several effective wing shapes were reviewed based on these forces. Their characteristics will be estimated with variable wind speed and be utilized as basic data for the design of the passive pitch control module.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2021.11a
• /
• pp.708-710
• /
• 2021

본 논문에서는 X-ray 진단에서 산란선으로 인한 영상의 왜곡을 보정하는 방법으로서 수정된 구조의 AE(Auto-Encoder) 모델에 기반한 방법론을 제안한다. 기존 AE 모델의 계층에 따라 특징지도의 크기가 축소되고 팽창되는 과정에서 영상 복원에 필요한 정보가 소실될 가능성을 보완하기 위하여 동일 레벨 계층 간에 스킵 연결을 추가하였다. 또한 X-ray 영상에서 피사체 세부 부위의 두께와 밀도에 따라 산란선의 영향이 서로 다른 형태로 나타난다는 특성을 학습 과정에 효과적으로 반영하기 위하여 어텐션 모듈을 추가한 네트워크 구조를 도입하였다. 총 80 쌍의 흉부 X-ray 영상 데이터에 대하여 기존의 AE 모델을 사용한 방법 및 U-Net 과 FFA-Net 모델을 사용한 영상 복원 기법의 실험 결과를 상호 비교함으로써 제안된 방법의 타당성을 평가하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.507-511
• /
• 2010

Digital Radio Frequency Memory (below, DRFM) performs RF signal data store, delay and re-transmission. DRFM is wildly used as core module of Jammer, EW simulator, Target Echo Generator etc. This paper suggests a hardware design of DRFM which is composed RF section(RF Input/Output Module, Local Oscillator Module) and Digital section(ADC module, memory, DAC module), and confirm the validity of the propose by the test result.

• The Transactions of the Korea Information Processing Society
• /
• v.3 no.4
• /
• pp.938-946
• /
• 1996

Hierarchical subband codec has been widely promoted in the field of data compression/decompression because of their simplicity and modular nature. Over the past years, the study has received great attention to the perfect reconstruction (PR)system which perfectly recovers the original input signal at the reconstructed output. However, in the actual subband codec system, the signals that passed through the analysis filter bank are quantized before transmission to the receiver side and reconstructed by the synthesis filter bank. Thus the PR system is impossible and the quantization effects must be carefully considered in the system design such that the system recovers the reconstructed output as possible to the the original input signal with minimum quantization error.In this paper, we propose an optimum hierarchical subband codec structure in the presence of quantizer. The optimality criteria of the code is given to the deign of the hierarchical analysis/synthesis subband filter bank and the quantizer that minimize then output mean square error due to the quantizer in the codec. Specific opti-mum design esamples are shown with level-1, level-2 hierarchical structure. The optimal designs are verified by computer simulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.10
• /
• pp.1433-1443
• /
• 1993

DCT(Discrete Cosine Transform) / IDCT(Inverse DCT) is widely used in various image compression and decompression systems as well as in DSP(Digital Signal Processing) applications. Since DCT/ IDCT is one of the most complicated part of the compression system, the performance of the system can be greatly enchanced by improving the speed of DCT/IDCT operation. In this thesis, we designed a DCT/IDCT core processor using module generator technique. By utilizing the partial sum and DA(Distributed Arithmetic) techniques, the DCT/ IDCT core processor is designed within small area. It is also designed to perform the IDCT(Inverse DCT) operation with little additional circuitry. The pipeline structure of the core processor enables the high performance, and the high accuracy of the DCT/IDCT operation is obtained by having fewer rounding stages. The proposed design is independent of design rules, and the number of the input bits and the accuracy of the internal calculation coa be easily adjusted due to the module generator technique. The accuracy of the processor satisfies the specifications in CCITT recommendation H, 261.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.1
• /
• pp.109-114
• /
• 2010

In this paper, the implementation of a human signal sensing module that has capabilities to check and restore the weak signals from the human body is presented. A module presented in this paper consists of processing and sensing elements related to human pulse and body temperature and a controller implemented with SoC design method. PPG data is detected by a noise filtering process toward the amplified signal which is from the operating frequency between 0.1Hz - 10Hz. A digital temperature sensor is used to check the body temperature. A sensor outputs the corresponding value of the electric voltage according to the body temperature. Moreover, this paper discusses the implementation of an enhanced microprocessor which is synthesized with VHDL as a part of the SoC development and used to control the entire module. The SoC processor is implemented on a Xilinx Spartan 3 XC3S1000 device and has the achieved operating frequency of 10MHz. The implemented SoC processor core is successfully tested with macro memories in FPGA and the experimental results are hereby shown.