• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.3
• /
• pp.99-104
• /
• 2005

This paper describes the measurement and analysis of the basic line constants in PLC(Power Line Communication) in the residential building. An apartment is considered as one of the conventional residences to get the line constants in this paper, Agilent 4263B LCR Meter is used to measure the detailed values each area and the specific results and averaged analysis data are shown in the tables. The measured results are a little bit different from the calculated values using conventional formula due to the line arrangement, neglected factors, complex permittivity, and etc. This paper describes many kinds of lines and wiring figures of domestic construction. It can be utilized with the analyzed line characteristics in frequency domain as a planning reference of PLC.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.6
• /
• pp.642-653
• /
• 2008

This study deals with modeling of head-related transfer functions(HRTFs) using principal components analysis(PCA) in the time and frequency domains. Four PCA models based on head-related impulse responses(HRIRs), complex-valued HRTFs, augmented HRTFs, and log-magnitudes of HRTFs are investigated. The objective of this study is to compare modeling performances of the PCA models in the least-squares sense and to show the theoretical relationship between the PCA models. In terms of the number of principal components needed for modeling, the PCA model based on HRIR or augmented HRTFs showed more efficient modeling performance than the PCA model based on complex-valued HRTFs. The PCA model based on HRIRs in the time domain and that based on augmented HRTFs in the frequency domain are shown to be theoretically equivalent. Modeling performance of the PCA model based on log-magnitudes of HRTFs cannot be compared with that of other PCA models because the PCA model deals with log-scaled magnitude components only, whereas the other PCA models consider both magnitude and phase components in linear scale.

• Journal of the Korean Magnetics Society
• /
• v.19 no.4
• /
• pp.147-151
• /
• 2009

The saturation magnetization and uniaxial anisotropy constant were obtained from magnetization and torque curves measurement in high resistive CoFeHfO thin film. The measured results were used for the analysis of the microwave complex permeability based on Landau-Lifshitz-Gilbert (LLG) theory. The high resistive CoFeHfO thin films showed very low damping constants of ${\alpha}$ = 0.014. The results are interpreted in terms of various magnetic phase with very low damping constant, which were existing inside the CoFeHfO thin film, through the linewidth analysis of the ferromagnetic resonance signal with magnetic field.

• Journal of the Korean School Mathematics Society
• /
• v.15 no.3
• /
• pp.535-563
• /
• 2012

This study was conducted to confirm the necessity of analogical thinking and to empirically verify the effectiveness of analogical reasoning through the visual representation by analyzing the factors of problem solving depending on analogical conditions. Four conditions (a visual representation mapping condition, a conceptual mapping condition, a retrieval hint condition and no hint condition) were set up for the above purpose and 80 twelfth-grade students from C high-School in Cheong-Ju, Chung-Buk participated in the present study as subjects. They solved the same mathematical problem about sequence of complex numbers in their differed process requirements for analogical transfer. The problem solving rates for each condition were analyzed by Chi-square analysis using SPSS 12.0 program. The results of this study indicate that retrieval of base knowledge is restricted when participants do not use analogy intentionally in problem solving and the mapping of the base and target concepts through the visual representation would be closely related to successful analogical transfer. As the results of this study offer, analogical thinking is necessary while solving mathematical problems and it supports empirically the conclusion that recognition of the relational similarity between base and target concepts by the aid of visual representation is closely associated with successful problem solving.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.9C
• /
• pp.817-824
• /
• 2006

The crest factor properties of 16-QAM modulated one- and two-code assisted multi-carrier code-division multiple-access (MC-CDMA) signals employing complementary pair as spreading sequences are characterized. It is shown that a set of relationship between the two 16-QAM symbols entirely characterize the power envelope waveforms of the signals. There exists 60 different sets of relationship, which results in 16 different crest factors as a result of various equivalent transforms on the corresponding message symbols. It is also shown that the individual crest factor corresponding to each message combination is always bounded by 3dB.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.2
• /
• pp.264-272
• /
• 2015

In this paper, we analyze the statistical characteristic and describe the anti-interference performance of the signal for the LPI-applied GNSS using encrypted spreading code. To do this, we analyze the correlation property of encrypted sequences theoretically having various symbol sets over complex root of unity. We derive the degradation of anti-interference performance of encrypted sequences comparing with Gold and Zadoff-Chu sequences using theoretical and experimental methods.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2000.11a
• /
• pp.93-96
• /
• 2000

In this study, we investigated the electromagnetic properties of Mn-Zn ferrite doped with rare earth oxide (Dy$_2$O$_3$, Er$_2$O$_3$). The main composition is 52mo1% $\alpha$-Fe$_2$O$_3$, 25mo1% Mn$_3$O$_4$23mo1% ZnO and doped with them(0.05wt%~0.25wt%, step:0.05wt%). An experimental process has advanced by conventional ferrimagnetism manufacturing that was prepared by standard ceramic techniques. The XRD pattern of all doped sample were observed spinel and secondary phase. The density of sample were measured nearly constant value. As increased the additive, resistivity, initial permeability and real component of the series complex permeability increased with setting limits each other. In case of Mn-Zn ferrite excess doped with them, resistivity, initial permeability and real component of the series complex permeability decreased and magnetic loss increased in proportion to increasing the additive.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.10
• /
• pp.1074-1080
• /
• 2009

A method for determining the geometric stability characteristics of a brake corner module (BCM) is presented. Since disc brake "squeal" noise typically occurs at unstable resonant frequencies of a system, the likelihood of disc brake squeal for a particular design can be determined. Finite element methods are used to derive complex eigenvalue for a brake corner module. Some unstable modes calculated by finite element methods correspond to squeal noise data. Through kinetic energy participation analysis for each part of BCM, we can efficiently predict squeal noise data.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.4
• /
• pp.216-222
• /
• 2002

Brake Moan is a laud and strong noise occurring at any vehicle speed over 2 mph as a low frequency in below 600Hz. In this study, we targeted to shift the unstable mode that causes the brake moan from the moats frequency range to sufficiently higher frequency range to avoid the moan phenomenon. We simulated the finite element model and found out the nodes in which the brake moan occurs the most and we regarded the boundary and its relationship between the brake pad and the rotor as a spring coefficient k. With the binary set of the spring coefficient k, we finally used genetic algorithm (GA) to get the optimal topology of the brake pad and its shape to avoid the brake moan. The final result remarkably shows that genetic algorithm can be used in topology optimization procedures requiring complex eigenvalue problems.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.2
• /
• pp.29-35
• /
• 2004

We synthesizd and analyzed the optical transfer function(OTF) of the modified triangular interferometer(MTI) using two-pupil synthesis method. In the case of MTI, we demonstrated that we can obtain bipolar functions and complex hologram without bias by two-pupil synthesis method.