• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2000.11a
• /
• pp.420-423
• /
• 2000

본 논문은 IMT-2000 기지국용 이중편파 ASSAP(Air-Strip-Air-Patch)형 마이크로스트립 안테나를 설계하였다. 복사소자로는 급전선과 복사부와의 고립도가 좋은 개구 결합형 패치를 이용하였다. $\pm$45$^{\circ}$직교 슬롯을 이용하여 이중편파를 발생시키고 급전선으로는 광대역화를 위한 에어 스트립라인을 이용하였으며 안테나의 복사특성을 만족하기 위해 패치의 크기와 접지면의 크기를 조정하여 Ensemble로 시뮬레이션 하였다. 그 결과 설계 제작한 안테나는 두 개의 포트 모두 전대역에 걸쳐 1.5:1 이하의 VSWR과 -25dB이하의 격리 특성, 그리고 65$^{\circ}$$\pm$ 7$^{\circ}$의 수평범폭을 갖는다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.10
• /
• pp.1089-1095
• /
• 2003

In this paper, the 26 GHz band omnidirectional antenna that produces an isotropic radiation pattern in the azimuth plane and a directive radiation pattern in the elevation plane was designed by using reflector antennas. To investigate the reliability of the designed antenna, that was analyzed by using the aperture field method and the calculated value was compared with the measured value. An good agreement was achieved between the calculated characteristics and the experimental performance. We found that the designed antenna in this paper can be used as the omnidirectional antenna with reflectors and the analysis method in this paper can be used for the analysis of this type antenna.

• Solar Energy
• /
• v.15 no.3
• /
• pp.39-52
• /
• 1995

This study is investigated numerically on the heat transfer characteristics of surface radiation-natural convection interactions in a two dimensional enclosure assumed Ondol cavity. Mean Nusselt number of the bottom surface with surface radiation is increased by increasing wall emissivity and by decreasing dimensionless thickness of adiabatic wall. and is greater than that without radiation. Mean Nusselt number of the bottom surface for convection only with surface radiation is slightly smaller than that without surface radiation with decrease dimensionless thickness of adiabatic wall.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.7 no.4
• /
• pp.667-680
• /
• 1995

튜브 내의 입구영역에서 난류 유동에 의한 대류와 비회복사(non-gray radiation)가 동시에 일어날 때의 열전달특성을 수치해석적으로 연구하였다. 작동유체는 이산화탄소, 수증기, 질소의 혼합가스라고 가정하였다. 지배방정식을 계산하기 위해 유한차분법이 이용되었고, 복사전달방정식을 이차편미분방정식으로 바꾸기 위해 P-1 근사법이 사용되었다. 그리고 혼합가스의 비회흡수계수(non-gray absorption coefficient)는 지수광폭밴드모형(exponential wide band model)을 이용해서 구하였다. 열전달특성에 대한 온도조건의 영향을 조사하기 위해 튜브의 축방향에 대한 평균 온도와 뉴셀트수(Nusselt number)의 변화를 몇 가지 다른 온도조건에 대해 나타내었다. 또한, 가스의 성분조성에 대한 영향을 조사하였으며, 이러한 결과에 기초해서 튜브 내에서 난류유동에 의한 대류와 비화복사가 동시에 일어날 때의 복사 뉴셀트수를 쉽게 예측할 수 있는 방법을 제시하였다.

• Korean Journal of Optics and Photonics
• /
• v.12 no.5
• /
• pp.376-381
• /
• 2001

We have fabricated a spectroadiometric system to measure spectral radiance of optical sources and evaluated its characteristics such as spectral responsivity, nonlinearity, and so on. The measurement system with PMT, Si, InGaAs, and IR-enhanced InGaAs detectors has shown a good linearity and a wide spectral responsivity of 250∼2500 nm. This spectroradiometric system will be used as the primary national standard system of spectral radiance measurements.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2000.11a
• /
• pp.359-363
• /
• 2000

기존의 직사각형 마이크로스트립 평면구조 패치 안테나를 변형하여 패치상에 오목한 구조를 갖는 새로운 3차원 패치구조의 마이크로스트립 안테나를 제안하고, 그 공진주파수와 대역폭 변화 특성을 연구하였다. 오목형 구조의 크기에 따라 공진 주파수와 대역폭이 증가하는 것으로 관찰되었으며, 복사특성은 기존의 마이크로스트립 안테나와 거의 유사한 특성을 나타내었다. 새로운 3차원 구조를 갖는 패치에 대한 해석 및 설계는 FDTD 방법을 사용하였으며, 이에 대한 검증을 위해 기존의 마이크로스트립 안테나와 제안된 오목형 구조의 안테나를 제작하여 측정한 결과 공진주파수 및 대역폭 특성 변화가 해석결과와 잘 일치함을 확인할 수 있었다.

• Aerospace Engineering and Technology
• /
• v.8 no.2
• /
• pp.1-7
• /
• 2009

The Geostationary Ocean Color Imager (GOCI) is under development to provide a monitoring of ocean-color around the Korean Peninsula from geostationary platforms. It is planned to be loaded on Communication, Ocean, and Meteorological Satellite (COMS) of Korea. In this study, the radiometric model of GOCI, which is constructed based on the functional model of sub-system, is introduced. Non-linearity for each channel is analyzed in terms of linear gain and nonlinear gain by using the radiometric model. The non-linearity characteristic is validated by using test data which have been achieved during ground test at payload level. The non-linearity $G^3$/b shows identical characteristic for all channels.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.5
• /
• pp.614-620
• /
• 1998

In this paper, we analyze theoritically the propagation and radiation characteristics for elliptical corrugated waveguides. The solutions of wave equations in an elliptic cylinder system are obtained in terms of Mathieu functions of 1st and 2nd kind. The electromagnetic fields in the elliptical corrugated waveguide can be represented by series and products of angular and radial Mathieu functions. By using impedence matching at the boundary between the inner region and the slot region, characteristic equations are derived. Then the characteristic equation is solved for $HE_{11}$ mode which is dominant mode in the elliptical corrugated waveguide and the fields in the aperture is calculated. And the propagation pattern for the elliptical corrugated waveguides is calculated through the field equivalence principle.

• Korean Journal of Optics and Photonics
• /
• v.27 no.1
• /
• pp.18-24
• /
• 2016

To effectively utilize a flash and predict its effects on an infrared device, it is essential to know the infrared characteristics of the flash source. In this paper, a study of the IR characteristics of flash light sources is carried out. The IR characteristics of three flash sources, of which two are combustive and the other is explosive, are measured with an IR characteristic measurement system over the middle- and long-wavelength infrared ranges. From the measurements, the radiances over the two IR ranges and the radiative temperatures of the flashes are extracted. The IR radiance of flash A is found to be the strongest among the three, followed by those of sources C and B. It is also shown that the IR radiance of flash A is about 10 times stronger than that of flash B, even though these two sources are the same type of flash with the same powder. This means that the IR radiance intensity of a combustive flash source depends only on the amount of powder, not on the characteristics of the powder. From the measured radiance over MWIR and LWIR ranges for each flashes, the radiative temperatures of the flashes are extracted by fitting the measured data to blackbody radiance. The best-fit radiative temperatures (equivalent to black-body temperatures) of the three flash sources A, B, and C are 3300, 1120, and 1640 K respectively. From the radiance measurements and radiative temperatures of the three flash sources, it is shown that a combustive source radiates more IR energy than an explosive one; this mean, in turn, that the effects of a combustive flash on an IR device are more profound than those of an explosive flash source. The measured IR radiances and radiative temperatures of the flash sources in this study can be used to estimate the effects of flashes on various IR devices, and play a critical role for the modeling and simulation of the effects of a flash source on various IR devices.

• Proceedings of the Korean Ceranic Society Conference
• /
• 2003.04a
• /
• pp.162.2-162
• /
• 2003