• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.195.2-195.2
• /
• 2012

궤도상에서 지구의 대기는 태양의 복사에너지에 의하여 양이온과 음이온으로 이온화된 자유 전자로 존재하게 되는데 이러한 상태를 플라즈마 환경이라고 부른다. 인공위성이 궤도에서 운용될 때, 플라즈마 환경에서의 강한 에너지를 가진 전하들은 위성을 투과하여 위성 내부에 축적될 수 있다. 이러한 전하들은 고립되어 있는 전도체의 끝에 모이게 되고, 전하량이 breakdown 레벨에 이르게 되면 아크 방전이 일어나게 된다. 방전에 의한 전류가 민감한 회로에 들어가게 되면 오동작이나 기능손상을 일으킬 수 있다. 보통 저궤도 위성이 놓이게 되는 낮은 고도와 경사각에서 플라즈마는 밀도가 높고 낮은 에너지를 가지는 반면, 정지궤도 위성이 놓이게 되는 높은 고도의 플라즈마는 낮은 밀도와 지구자기 폭풍 등에 기인하여 높은 에너지를 갖는다. 따라서 정지궤도 인공위성의 경우 ESD의 영향을 좀 더 면밀하게 검토하고 검증할 필요가 있다. 본 논문에서는 정지궤도 위성용 ESD 시험장비의 개발결과에 대하여 논의한다. 시험장비는 ESD 건과 Spark gap, 몇몇의 저항 및 캐패시터로 구성된다. 정지궤도 상에서의 ESD 방전 전류를 모사하는 파형을 구현하기 위한 방법과 결과를 소개하였다.

• 한국태양에너지학회:학술대회논문집
• /
• 2012.03a
• /
• pp.134-139
• /
• 2012

This study observed downward long and short-wave radiant environment with selecting 4 areas which have different height in downtown and 1 suburban area to figure out the characteristic of radiant environment in each altitude. The purpose of this study is to collect the preliminary data for interpreting urban thermal environment in summer season by analyzing thermal characteristic of atmosphere in the upper of downtown. The results of this study are as follows. 1) The higher altitude has the lower temperature, and temperature difference was more huge in day time than night time. 2) The short wave radiation according to altitude was higher as altitude was high. 3) Generally, the higher altitude has the lower air temperature, and also the higher altitude has the lower downward long wave radiation by the atmospheric radiation. 4) The ratio short wave radiation of long wave radiation was lower as altitude was high. And the urbanization effect was higher as the ratio was low.

• Journal of the Korean Solar Energy Society
• /
• v.34 no.1
• /
• pp.105-116
• /
• 2014

The objective of this study was to compare and analyze of radiation environment between downtown and suburban area by observation of short, diffuse and long-wave radiation during summer season. The followings are main results from this study. 1) The trends of long-wave radiation is increasing from May to August and the variation of daily range is decreased. It is confirmed that the temperature was closely relevant to long wave radiation. 2) During observation period, suburban area is higher than downtown the value of direct solar radiation. 3) There are much direct solar radiation in suburban area than downtown. But, it was measured much more horizontal solar radiation at the downtown area. From the this result, we can conclude that diffuse radiation play a important role at horizontal solar radiation.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.9 no.2
• /
• pp.89-96
• /
• 2005

This study has been performed on the mechanism of heat transfer between stratospheric airship and its surroundings while the airship is staying in the air at the altitude of 20km. The computational grid of airship has been generated and the results influenced by the number and the shape of grids have been compared. The temperature distributions have been obtained through this thermal analysis considering three modes of heat transfer - conduction, convection and radiation - in stratospheric conditions. Based on the airship's surface and inner temperature variations, the influence of temperature distributions on the helium envelope and the payload has been predicted.

• Electric Engineers Magazine
• /
• v.237 no.5
• /
• pp.49-53
• /
• 2002

일반 사무용 빌딩에서는 타이프라이터, 복사기, 탕불기 등의 기기류가 공장에서는 기계, 장치류가 발열체로서 실내에 설치되어 있으며 이들의 기기류에 대한 연료 또는 전력에 의한 입력에너지는 모두 최종적으로 열에너지로 변환되어 방출되고 있다.

• Korea Journal of Geothermal Energy
• /
• v.7 no.2
• /
• pp.11-18
• /
• 2011

• Journal of Environmental Science International
• /
• v.4 no.2
• /
• pp.139-150
• /
• 1995

The Quantitative estimations of the stratification - destratification(SD) phenomena in Deukryang Bay, Korea have been carried out based on the data of wind speed, heat flux through the sea surface and tidal current amplitude. To find out the main factors causing SD, wv introduce the rate of energy balance of the surface heat flux, tidal and wind stirring proposed by Simpson and Hunter(1974). The calculated potential energy of three terms are compared, from which the energy of wind stirring effect was one order smaller than the heat flux and the tidal stirring. Using the results, we complement time integration of the potential energy with the several s values of 0.010~0.014 at interval 0.001 and with wind speeds of 1.5 and 2.0 times larger than observation values at land. It shows that the variation of SD phenomena in the bay mainly depended on tidal stirring and sea surface heating in summer if there is no exceptionally strong wind event like Typhoon. The stratification become to be foamed from about 5 July although the stratification a little decreases during the second spring tidal period of middle of July.

• Land and Housing Review
• /
• v.12 no.1
• /
• pp.129-137
• /
• 2021

External shading devices are well known solar control devices that can help reduce the cooling load of commercial buildings. For this study, experiments were conducted to examine the feasibility of shading devices in reducing both the cooling and heating loads. The influence of sky radiant cooling during winter was verified for the external shading device, internal roller blind, and window. Results can be summarized as follows. The temperature difference between the inner and outer surfaces of the window with the external shading device was 11.8℃ compared to 14.6℃ for one without the external shading device. This 2.8℃ difference was due to heat exchange by sky radiation when the surface temperature of the shading device was lower than the ambient outdoor air temperature. The roller blind resulted in a lower temperature of 0.8℃ compared to the average temperature of the window's air cavity. This was due to heat exchange by sky radiation of the roller blind surfaces. Without shading devices, the outside surface temperature of the window is about 3℃ higher. The study also found that when external shading devices were installed on both the southwest and southeast sides, the outside surface temperature of the windows were lower on the southwest side than the southeast side.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.6
• /
• pp.1639-1644
• /
• 1990

Effects of radiation on the wall-friction and heat transfer in the convergent and divergent nozzle of a rocket motor are investigated in the present paper. Radiative heat transfer cools down the core gas, and the decrease in the gas temperature reduces the convective heat transfer on the wall. Radiation heat transfer is estimated by using mean-beam-length approach and core flow is assumed to be one-dimensional isentropic. The compressible thermal boundary layer is solved by a finite difference method. The Cebeci-Smith eddy viscosity model is adopted for the present study. Convective heat transfer is reduced at the throat of the nozzle and is almost compensated with an increase in radiative transfer. In the sequel total heat transfer rate is slightly reduced. However, radiation heat transfer is dominant in the converging part of the nozzle.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.16 no.4
• /
• pp.241-250
• /
• 1997

The velocity dispersion of surface acoustical wave(SAW) of Si layer/mesh Au/Si substrate was measured by the frequency analysis technique of backward radiation at liquid/solid interface. The difference of backward radiation patterns depending on used transducers (2, 5, 10MHz) confirmed that the backward radiation phenomenon was caused by the energy radiation from SAW generated in surface region. An ultrasonic goniometer was constructed to measure continuously the angular dependence of backscattered intensity. The angular dependences of backward radiation(5MHz) were measured for Ni layer/Al substrate specimens that were bonded by epoxy involving different content of Cu powder. It was known that the width and pattern of backward radiation had informations such as the velocity dispersion, bonding quality and structure of surface region.