• Journal of the Korean Society of Child Welfare
• /
• no.36
• /
• pp.261-288
• /
• 2011

This study focuses on adolescent prosocial behavior as one of the necessary elements for youth to grow as a healthy member of the society. The purpose of this study is to examine the effects of peer group on adolescent prosocial behavior by comparing the peer influence model and the individual characteristics model. For the study, we conducted hierarchical multiple regression analyses using the data from the Korean Youth General Survey 2008, administered by the Ministry of Health and Welfare. Results show that friends' prosocial behavior had a positive impact, but friends' antisocial behavior had a negative impact on adolescent prosocial behavior. When individual characteristics including self-esteem and empathy were analyzed simultaneously, empathy, self-esteem, friends' prosocial behavior, and friends' antisocial behavior were found to be statistically significant. The strength of association between individual characteristics and adolescent prosocial behavior was greater than that of friends' behaviors. Also, significant moderating effects of individual characteristics on the relationships between adolescent prosocial behavior and friends' behaviors were found. For example, the positive effect of friends' prosocial behavior on adolescent prosocial behavior increased as adolescent's level of self-esteem increased. On the other hand, the negative effect of friends' antisocial behavior on adolescent prosocial behavior decreased as adolescent's level of empathy increased. Based on the findings, both the peer influence model and the individual characteristics model were considered valid in explaining prosocial behavior of Korean adolescents. Finally, implications of this study for positive youth development were discussed.

• Korean Journal of Optics and Photonics
• /
• v.33 no.2
• /
• pp.74-83
• /
• 2022

The entire process, from the raw material to the final system qualification test, has been developed to fabricate a large-diameter, lightweight reflective-telescope system for a satellite observation. The telescope with 3 anastigmatic mirrors has an aperture of 700 mm and a total mass of 66 kg. We baked a silicon carbide substrate body from a carbon preform using a reaction sintering method, and tested the structural and chemical properties, surface conditions, and crystal structure of the body. We developed the polishing and coating methods considering the mechanical and chemical properties of the silicon carbide (SiC) body, and we utilized a chemical-vapor-deposition method to deposit a dense SiC thin film more than 170 ㎛ thick on the mirror's surface, to preserve a highly reflective surface with excellent optical performance. After we made the SiC mirrors, we measured the wave-front error for various optical fields by assembling and aligning three mirrors and support structures. We conducted major space-environment tests for the components and final assembly by temperature-cycling tests and vibration-shock tests, in accordance with the qualifications for the space and launch environment. We confirmed that the final telescope achieves all of the target performance criteria.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1992.06a
• /
• pp.127-130
• /
• 1992

한국 근해에서 능동소나 (active sonar) 사용시 사용되는 environmental parameters 가운데 하나인 volume reverberation(REv)을 산출하기 위하여 플랑크톤에 의한 후방산란 강도(backscattering strength)에 대한 연구를 하였다. 이를 위하여 수산진흥원 자료(80-89년)중 부유생물조사표에서 후방산란 강도가 다른 종에 비하여 큰 copepoda의 개체수를 평균한 후, 수심별 개체수를 계산하여 수심별, 주파수별(10, 50kHz), 계절별(2월, 8월) 후방산란 강도와 multipath eigenray model을 이용하여 REv를 산출하였다. 예로 사용한 동남해역(zone:S3), 서해중부해역(zone:W3)에서 주파수별 REv는 일반적인 형태인 포기에는 고주파가 높고, 1.5초 이후에는 저주파가 높게 나타났다. 그러나 여름이 겨울보다 플랑크톤 개체수가 많아 후방산란 강도가 크지만(2-5dB), REv는 겨울이 더 크게 나타났다. 이러한 이유는 SVP profile에 의한 pressure 계산결과, 여름에는 ray가 down-ward이고 겨울에는 duct를 형성하여 ray가 거의 direct로 진행하므로 transmission loss가 여름이 크기 때문이다. 또한 ray tracing결과 여름철에는 ray crossing이 많아 겨울에 비하여 fluctuation이 심하게 나타나는 현상을 보이고 있다. 두 지역 이외에도 한국근해의 정확한 REv을 예측하기 위해서는 플랑크톤의 정확한 측정과, 이론적인 수치와 비교할 수 있는 실측치를 얻는 것이 필요하다고 볼 수 있다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.6
• /
• pp.30-35
• /
• 2003

In this paper, the transverse strain was measured using polarization maintaining fiber Bragg grating(PMFBG) sensor. PMFBG sensor was fabricated using phase mask and Excidmer laser. The reflected wavelength of PMFBG sensor had dual peaks due to intrinsic birefringence. To find the polarization axes, peak sensitivity was measured under compression test. The signal characteristics of PMFBG sensor were also examined in embedding condition. The embedded PMFBG sensor in epoxy block was loaded for the transverse strain measurement, The wavelength-swept fiber laser(WSFL) was used to construct the PMFBG sensor system. Experiments showed that the PMFBG sensor could successfully measure the transverse strain.

• Journal of Biomedical Engineering Research
• /
• v.17 no.1
• /
• pp.79-84
• /
• 1996

A number of experimental evidences suggest that the rnun ventrolateral medulla(RVLM) is the final common pathway in the regulation of arterial blood pressure. A Voup of neurons in the RVLM, called the cardiovascular neurons (UN), show spontaneous activity temporally synchronized with the periodic cardiac cycle. These neurons affect the sympathetic nerve discharge(SND), thus are believed to be responsible for blood pressure control. The present experiment identified 98 UVNs in 42 cats based on the temporal relationships between each neuron's activity with both the cardiac cycle and SWD. In 20 UWL changes of spontaneous firing rate(FR) during the somatosympathetic reflex(SSR) were studied Five different firing patterns were observed during the pressor and depressor responses of SSR, implying that they form an interconnected neuronal circuit interacting with one another to generate efferent signals for blood pressure regulation. In the following companion paper, the firing patterns of CVN are analyzed to develop a minimal neuronal circuit model explaining the present experimental outcome.

• Journal of Digital Convergence
• /
• v.16 no.1
• /
• pp.147-152
• /
• 2018

Recently, as the demand for transmission of ultra-high quality media data such as UHD, AR, and VR increases, various technologies for this have been actively developed and IEEE 802.11ad standard have been commercialized. In this paper, a test bed is constructed to analyze the indoor wireless environment using the IEEE 802.11ad standard based on mmWave, and the experimental results of various indoor wireless environments are introduced and analyzed. We compared the data from the module by data transmission, such as signal to noise ratio(SNR) and throughput. And we measured the beam pattern and width of the module and compared the effects on the indoor environment of the corridor and the office. This shows that the signal reflection of the wall shows higher SNR values and is more suitable to use for indoor than outdoor. It is confirmed that the loss when not in line of sight(LoS) is not enough to compensate the wall reflected signal. As a result, it is judged to be suitable for the indoor use of the mmWave LAN and can be usefully used for further experiments.

• Korean Journal of Crystallography
• /
• v.4 no.2
• /
• pp.54-62
• /
• 1993

The crystal shnture of dehydrated fully Cd2+-exchanged zeolite A evacuated at 2 × 10-6 Torr and 650℃ (a:12.189(2) A) and of its iodine sorption corrplex (a:12.168(2)A) have been netsmlmn by single uystal x-ray diffraction techliques in the cubic space group hkTn at 21(1)℃. The strutures were refined to final error indices, Ri:0.057 and R2 =0.063 with 186 reflections and Rl:0.082 and R2:0.085 with 181 reflections, respectively, for which 1>3σ(In both structure, six lie at two distinguished threefold axes of unit cell ten the crystal structure of an iodine sorption complex of Cd6-A four Cd2+ ions are recessed 0.69(1) A into the large cavity to complex each with from the (111) plane of 0(3), whereas two Cd2+ ions recessed 0.68(1) A into the sodalite unit Awximately 4.0 l3ions per nit cell are sorbed. Each bridge between a Cd2+ ion and 8-ring oxygens ((I-I-I)= 117(1) ˚ and 0(1)-I(1)-I(2)=172(1)). The near linear I-I-0 angle and its interatomic distance (I-0=3.57(3) A) are indicative of a weak charge transfer interacticn between the frarrework oxygen and iodine. The existence of In3 inside the large cavity indicates that the If ions and H ions may be produced by reaction of In vapor with water molecules which maybe associated with Cd2+ ions in partially dehydrated Cd6-A In3- ions may be produced by the combination of I- and I2.

• Composites Research
• /
• v.28 no.6
• /
• pp.333-339
• /
• 2015

Electromagnetic interference shielding composite with low density ($1.18g/cm^3$) was fabricated using electroless plated FeCo magnetic metal hollow fibers and ethylene propylene diene monomer (EPDM) polymer. Aspect ratio of the fibers were controlled and their hollow structure was obtained by heat treatment process. The FeCo hollow fibers were then mixed with EPDM to manufacture the composite. The higher aspect ratio of the magnetic metal hollow fibers resulted in high electromagnetic interference shielding effectiveness (30 dB) of the composite due to its low sheet resistance (30 ohm/sq). The enhanced electromagnetic interference shielding effectiveness was mainly attributed to the formation of conducting network over the percolation threshold by high aspect ratio of fibers as well as an increase of the reflection loss by impedance mismatch owing to low sheet resistance, absorption loss, and multiple internal reflections loss.

• Composites Research
• /
• v.21 no.5
• /
• pp.9-14
• /
• 2008

Carbon nanofibers (CNFs) were used as dielectric lossy materials and NiFe particles were used as magnetic lossy materials. Total twelve specimens for the three types such as dielectric, magnetic and mixed radar absorbing materials (RAMs) were fabricated. Their complex permittivities and permeabilities in the range of $2{\sim}18$ GHz were measured using the transmission line technique. The parametric studios for reflection loss characteristics of each specimen to design the single-layered RAMs were performed. The mixed RAMs generally showed the improved absorbing characteristics with thinner matching thickness. One of the mixed RAMs, MD3with the thickness of 2.00 mm had the 10 dB absorbing bandwidth of 4.0 GHz in the X-band ($8.2{\sim}12.4$ GHz). It also showed very broad 10 dB absorbing bandwidth as wide as 6.0 GHz in the Ku-band ($12.0{\sim}18.0$ GHz) with the thickness tuning to 1.49 mm. The experimental results for selected several specimens were in very good agreements with simulation ones in terms of the overall reflection loss characteristics and 10 dB absorbing bandwidth.

• Journal of dental hygiene science
• /
• v.12 no.5
• /
• pp.477-485
• /
• 2012

This study evaluate the influence of food staining food and bleaching on the color (CIELAB) and reflectivity of two-way (anterior & posterior) composite resin and flowable composite resin. There were 6 immersion media: kimchi, red pepper paste, blueberry, tea, curry and distilled water. A total of 36 specimens ($11{\times}11{\times}2$ mm) were prepared and immersed in each immersion media for 8 days at $37^{\circ}C$. Their color and reflectivity measured with the spectrophotometer at baseline and every 24 hours. Data from the color change and reflectivity were collected and subjected to statistical analysis by ANOVA, ANCOVA and RM-ANOVA. Curry showed the highest influence on color change and blueberry on brightness (p<0.001) on both resins. Bleaching after polishing made color change more than polishing or bleaching independently on two-way (anterior & posterior) composite resin, but not on flowable composite resin. It was suggested cleaning the mouth after taking curry and blueberry be needed to maintain the original color of composite resin.