• Journal of the Institute of Convergence Signal Processing
• /
• v.6 no.2
• /
• pp.59-66
• /
• 2005

Accuracy of current measurement in fiber optic current sensor(FOCS), especially, unidirectional polarimetric fiber optic current sensor(PFOCS) is affected by the environment perturbations such as acoustic vibrations changes to the sensing fiber, and intrinsic perturbations such as the bending fiber that the sensing fiber wound around a current carrying wire. The perturbations affect the birefringence properties of sensing fiber in sensor head and cause false current readings. Thus, using compensation technique, reciprocal PFOCS, for unidirectional PFOCS the perturbations are suppressed. In this paper, we carried out the numerical analysis of performance in reciprocal PFOCS including the degree of polarization error, and false current of environmental and intrinsic perturbations on the sensing fiber. Also, we compared the effect of mirror with the faraday rotation mirror(FRM) in reciprocal PFOCS configuration. And the different optical source's wavelengths, 633nm and 1300nm is used. In the results, at 633nm, using mirror and FRM, the degree of polarization error is calculated to $2.3\%$ and $0.0196\%$, respectively. At $1300{\cal}nm$ using mirror and FRM the degree of polarization error is calculated to $9.97\%$ and $0.0196\%$, respectively. Also, compared with false current, the results is calculated to $9.82{\times}10^{-9}A$ and $1.4{\times}10^{-17}A$, respectively, and show that the reciprocal PFOCS is more robust configuration than unidiretionnal PFOCS for environmental and intrinsic perturbations.

• Proceedings of the KIEE Conference
• /
• 2001.07c
• /
• pp.1823-1825
• /
• 2001

고리형 반도체-광섬유 레이저 공진기 안에 높은 복굴절률을 가지고 있는 편광 유지 광섬유 루프 거울을 삽입하여 새로운 구조의 다파장 발진 시스템을 제안하고 구현하였다. 이득 매질인 반도체 광 증폭기의 특성으로 인해 실온에서 파장 간격이 1 nm 이내인 22 개의 파장의 빛을 발진시킬 수 있었다.

• Proceedings of the Optical Society of Korea Conference
• /
• 2004.02a
• /
• pp.368-369
• /
• 2004

Birefringence due to structural irregularities in photonic crystal fiber is numerically analyzed. The statistical correlations between the birefringence and the degree of the irregularities are presented, and their behaviors are explained using a perturbation theory.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.3
• /
• pp.20-20
• /
• 2001

광섬유고리에 편광제어를 통해 여러 광경로들에 대해서 손실을 조정함으로써 손실이 작은 광경로에서 발진하게 함으로써 발진 파장을 가변시킬 수 있는 편광제어 파장가변 고리형 광섬유레이저를 구현하였다. 내부 공진편광기를 사용하여 1㎚의 종모드간격으로 발진을 일으킬 수 있었고 편광제어기 및 내부공진편광기를 조절해서 1540㎚에서 1560㎚의 범위에서 파장가변을 시킬 수 있었다. 또한 실험적으로 나타난 발진특성을 광경로와 복굴절손실의 개념을 사용하여 발진출력 특성을 분석함으로써 발진파장을 가변시키는 메카니즘을 추정해 보았다. 여기서 복굴절손실이 같은 광경로들의 종모드들 사이에 보강간섭이 일어나 발진파장을 변화시킬 수 있음을 알 수 있었다.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.54 no.2
• /
• pp.55-62
• /
• 2005

The optical CT was developed to use twisted fibers for 170 kV GIS. The fiber sensor optimized on the optical CT was wound 3 turns and twisted 4 times per a turn at the pipe with a diameter of 130 mm. The measurement error for the linearity which was satisfied the criterion of 'IEC Class-1.0' was less than ± 0.44 % at the transmission type and ± 0.82 % at the reflection type to 2,000 A. At a low current to 200 A, the measurement error was ± 0.69% at the transmission type and ± 1.38 % at the reflection type.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.158-159
• /
• 2000

본 논문에서는 BK7 유리 기판에 Ag$^{+}$-$Na^{+}$ 이온교환법을 이용하여 1.31/1.55$mu extrm{m}$ 방향성 광결합기형 역다중화기를 제작하여 특성을 평가하였다. BK7에 이온교환법을 이용하여 도파로를 제작할 경우 0.2dB/cm 이하의 전파손실을 유지할 수 있으며 또한 도파로의 굴절율 분포가 단일모드 광섬유와 매우 유사하여 광섬유와 광소자 사이의 접합면에서 발생하는 접합손실을 줄일 수 있다 또한 BK7을 이용하면 도파로를 제작하였을 때 복굴절 현상이나 편광 의존성이 적어서 수동 소자 제작에 유용하다는 장점이 있다$^{(1 3)}$ . (중략)

• Proceedings of the Optical Society of Korea Conference
• /
• 2006.02a
• /
• pp.267-268
• /
• 2006

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.5
• /
• pp.145-150
• /
• 2007

Optical communication according to request of technology of communications and optical fiber to be full filed faster communication and pass over transmission capacity limit per unit area, per unit hour appeared, and this optical fiber acts the biggest role to influence performance of optical communication network. Optical fiber(PMF Polarization Maintaining Fiber) is used, and is used by electric field measurement, self-discipline measurement, sensor(Sensor) Department by high definition measure such as thermometry and storehouse component that use because make broad sense status and polarized light information in passageway and union with storehouse integrated circuit etc. that use broad sense interference developing could transmit in state that keep transmitting broad sense plane of polarization is polarized light existence. Also, research is developed by optical fiber for Coherent communication recently.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.3
• /
• pp.174-184
• /
• 2001

Wavelength tunable fiber ring laser can be tuned by causing a resonance on the optical path having the least loss which is controlled by a polarization adjustment. It is observed that lasing wavelengths having 1 nm FSR(Free Spectral Range) can be tuned over the range of 1540~1560 nm when a polarization controller and an intra-cavity polarizer are adjusted. The tuning mechanism can be expected by analyzing the characteristics of the laser output using an optical path model and the concept of a birefringence loss. It is found that the constructive interference between longitudinal modes of different optical paths may cause wavelength tuning in the fiber ring laser.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.6
• /
• pp.8-18
• /
• 2002

We study complicated nonlinear interactions of two orthogonally polarized pulses with pulse-width of less than 100fsec in the all-optical phase-shift switches, which use soliton pulse-train and fiber-splicing for control pulse to obtain multi-collisional $\pi$-phase-shift and consider Raman response function. We investigate switching performance in various input parameters such as input pulse-width and birefringence of fiber, and find optimum initial conditions for good switching performance in such all-optical switches.