• Conservation Science in Museum
• /
• v.7
• /
• pp.43-51
• /
• 2006

From the low swamp remains in Sinchang-dong, Gwangju, a number of wooden lacquerware along with various wooden artifacts were excavated. These excavated lacquerware have deteriorated and weak wooden parts and the lacquer layer come off from the wooden parts; they are very likely to peel off and crack. Therefore, we impregnated the lacquerware in PEG#4000 40% solution that was effective for vacuum freeze drying and finished freeze-drying below 0°…. We compared the weight of wood and lacquerware right after the freeze-drying with the weight after leaving them in a airtight space with 60% RH (relative humidity). The comparison results showed no change in weight; thereby we confirmed controlling the finishing temperature during freeze-drying could control the moisture in wood after drying and it could stabilize wood against the change in moisture in the atmosphere. according to the analysis of the lacquer fragment, the base layer was pasted on the wooden surface with mixed black pigment and the upper layer was pasted three or four times with the mixture of lacquer and black pigment; or it was pasted without the black base coating.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.148-148
• /
• 2020

산업의 고도화가 진행됨에 따라 화학원료의 사용이 증가하고 있고 독성을 가진 화학물질이 하천으로 유입되는 사고가 빈번하게 발생하고 있다. 수환경으로 유입되는 유해화학물질은 주로 무색무취의 물질들로 사고가 발생하더라도 초기 발견이 어려워 어류폐사를 유발하거나 취수시설에서 용수로 취수되는 경우가 발생하기 때문에 이에 대한 대응책 마련이 필수적이다. 하천에 유입된 오염물질의 거동을 신속하게 예측하기 위해 1차원 오염물질 추적 모형이 활용되는데, Fickian 이송-분산 모형(Fickian Advection-dispersion equation model; FADE)이 주로 사용되고 있다. 하지만 FADE는 오염물질이 하천 저장대에서 지체되는 현상을 반영하지 못하기 때문에 농도곡선의 왜곡도를 구현하지 못하는 단점을 가지고 있다. 따라서 본 연구에서는 하천저장대모형(River Storage Model; RSM)을 개발하고 이를 국가하천인 감천에 적용하였다. 본 연구에서 개발한 RSM은 분산계수, 본류대 면적, 저장대 면적, 저장대 교환계수의 네 가지 매개변수를 통해서 하천의 물질 저장 및 교환 특성를 구현한 non-Fickian 모형으로서, 생화학반응, 휘발, 흡·탈착항을 추가하여 유해화학물질의 혼합 거동을 정확하게 모의할 수 있도록 개발하였다. 저장대 모형의 매개변수를 산정하기 위해서 하천 유량과 지형자료를 기반으로 HEC-RAS를 모의하여 계산된 수리특성을 입력변수로 사용하였다. 저수기, 평수기, 풍수기 유량을 기준으로 세 경우의 시나리오 모의를 수행하였는데, 5ton의 톨루엔이 김천산업단지에서 감천으로 유입된 경우 약 20km 하류에 위치한 취수장에서 톨루엔의 농도변화를 예측했다. 보존성 물질에 대한 모의 결과, 풍수기의 경우 저수기에 비해 유속이 크기 때문에 취수장에서 20.56시간 먼저 기준농도에 도달하고, 7.21시간 더 짧게 머무는 것으로 나타났다. 유해화학물질의 반응특성에 대한 민감도 분석을 시행한 결과, 생화학적 반감기가 18.98시간보다 길고, 옥탄올-물 분배계수가 2.267 이하인 물질은 생분해 및 흡·탈착 반응에 둔감한 것으로 나타났다. 1m 수심 기준 0.114m/s 이하 유속에서의 하천 수리조건에서는 화학물질의 휘발성을 무시할 수 있는 것으로 밝혀졌다.

• Journal of Conservation Science
• /
• v.25 no.4
• /
• pp.439-450
• /
• 2009

The purpose of this study is to find out characteristics of the fillers made by epoxy resin (L-30) and filling epoxy resin (L-50) with talc, quartz sand and wollastonite with different mixture ratio of 5%, 50%, 80%, 120%, and 150%. The viscometer and colorimeter were used to measure the viscosity and chromaticity of the fillers. Additionally, IC and SEM were used to reveal characteristics of the filler, and checked ultrasonic wave velocity, compressive strength and contact angle to estimate the stability between the filler and stones which are essential for conservation treatments. The filler mixed with the talc had the lowest value in the ultrasonic wave velocity analysis, and its compressive strength decreased as the mixing rate of talc increased. On the other hand, wollastonite had higher values than others in the ultrasonic wave velocity and the compressive strength regardless of epoxy resin type, also, these values increased as mixing rate increased. The properties of the filler, which include the granularity and shape, have influence on characteristics of the stone conservation adhesives. Thus, the filler type, characteristic, and mixture ratio must be considered for effective conservation treatment.

• Journal of Conservation Science
• /
• v.19
• /
• pp.31-42
• /
• 2006

There are many materials used in restoring missing parts of pottery and ceramics and they are used according to the each quality of materials. In our research we tried to find the new repair materials to solve many problems exposed in the existing repair materials. As a result, we made new repair materials that we properly put oven bake clays into repair epoxy putty which is being used as oven bake clays for a long time. Fortunately, through testing yellowing, vickers hardness, coloring and heating temperature, We could get an idea that new repair materials would be the best materials in the efficiency of restoration, yellowing, and coloring.

• Journal of Conservation Science
• /
• v.36 no.2
• /
• pp.82-92
• /
• 2020

Modern artworks are constructed using a variety of materials and techniques. Sculptures, which predominantly consist of metals, usually have different shapes and consist of different material mixtures. The structural and material properties of these sculptures are often controlled by conservation treatment methods. However, the application of existing treatment methods is challenging at times, indicating that more diverse treatment materials and techniques are necessary. Therefore, in this study, a treatment method that employs volatile corrosion inhibitor(VCI) powder, rather than an anti-corrosion solution, for the conservation and management of metal artworks was used. VCI powder and VCI films containing VCI powder were used, and the results obtained confirmed that both of them showed anti-corrosion effect. Only a slight change in the chromaticity of metal samples was observed, and compared to the untreated samples, the application of the VCI powder resulted in a decrease in the rate of corrosion by half. Moreover, VCI film tests revealed that comparing to the untreated or polyethylene film-treated samples, VCI film treatment resulted in a decrease in the occurrence of corrosion compounds. The contact angle, surface energy, and surface electrical resistance were measured, and the evaluation of these surface properties established the anti-corrosion effect of VCI. Additionally, direct application of VCI and VCI films on actual sculptures further confirmed the anti-corrosion effect of VCI.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1998.10a
• /
• pp.53-58
• /
• 1998

1. 서론 : 일반적으로 막 수송특성의 대부분은 막이 갖고 있는 하전밀도와 막내 포아의 크기가 지배적이다. 만약 2개의 요소가 조절 가능해질때 이온수송의 선택투과의 기능성을 갖는 분리막이 보다 독특한 성능의 복합막이 된다. 콜로디온막은 니트로 셀룰로오즈로 구성된 3차원 망 구조가 특징이고, 다른 물질과 결합이 쉽고, 탄화수소 화합물과 같은 활성이 센 물질과는 안정하게 반응한다. 콜로디온 용액에 ion-exchange-resin을 적절히 혼합시켜, 이온교환기를 갖는 고분자를 캐스팅하여 막을 제조한다. 또 다른 캐스팅막의 제법은 염(NaClO$_4$)을 콜로디온 혼합용액에다 반응시켜 다시 염-Nafion-콜로디온의 캐스팅 복합막이 된다. 제조한 막은 염의 수용액속에 보존한 후 사용하였다. 측정시에 막을 수용액으로 옮겨서 염을 충분히 추출시키면 이온이나 물분자와 결합하는 챤넬이 형성되어 포아가 막내에 생기게 된다. 결국 콜로디온을 지지로 한 이온교환막이 만들어지며 이것은 하전밀도와 포아를 갖는 독특한 분리막이 된다. 본 실험에서는 포아의 크기가 고정된 복합막에서 전하밀도의 변화에 따른 복합막을 제조하여서 복합막의 기능과 또 막의 구조내에 생성된 포아의 존재가 막현상에 어떤 결과를 가져오는가를 검토하였다.

• Korean Journal of Heritage: History & Science
• /
• v.50 no.3
• /
• pp.88-109
• /
• 2017

As the technique to remove Paraloid B-72, which is known as an irreversible material, the method using organic solvent and heating, though the ways vary depending on the kind of material to be removed, has been usually used, but it has yet to apply to mud mural because of the technical limit in processing and the potential risk of damage and, moreover, the removal efficiency which also remains unproven. Thus, in a bid to seek the way to safely remove Paraloid B-72 contained in mural, the test was conducted in a way of applying a compress method, which is deemed most efficient. The solvents which are proven to be Paraloid B-72 were applied to the absorbents such as active carbon fiber and methyl cellulose and then were eluted to the surface of mud mural sample which was prepared in the same size and condition for a certain time before evaluating the stability and removal efficiency. Such test was intended to identify the applicability to the mural of Mireukjeon Hall at Geunsansa Temple, which had been treated with Paraloid B-72 for preservation in the past. As a result, the way of mixing the absorbent such as active carbon fiber and Xylene alone or with other quick vaporable solvents proved to be most efficient in removing Paraloid B-72 from mud mural and particularly Acetone:Xylene(1:1wt%) was found to be the most stable among others. Such a test outcome is expected to be a useful data for removing Paraloid B-72 from the mural of Mireukjeon Hall at Geunsansa Temple as well as for restoring other mural cultural assets in the coming days.

• Korean Journal of Animal Reproduction
• /
• v.23 no.2
• /
• pp.165-174
• /
• 1999

Boar semen can be frozen successfully. However, there is a large variability in the extent of damage boar semen samples experiences during cryopreservation. This experiment was undertaken to find out factors that affect a post-thaw viability of boar spermatozoa. For this purpose, cryodiluents(BF5, LEY, Soejima and M-Soejima), cryoprotectants(glycerol. ethylene glycol, and propylene glycol), pre-freezing method(dryice-pellet, dryice-straw and L$N_2$vapour-st-raw) and total time required for freezing(2. 5, and 7 h) were compared as a factors. To investigate quality of semen during freezing process, motility(%), normal apical ridges(%, NAR), and proportion of living sperm(%) by flow cytometic analysis were assessed after collection, cooled, pre-frozen and post-thawing. Post-thaw motility of semen diluted with M-Soejima was 52.0%, respectively. When heparin, caffeine or heparin＋caffeine was added to 2nd cryodiluent of M-Soejima during freezing process, the highest motility after thawing was shown at the addition of caffeine (2mM), with 61.7$\pm$2.9% of motility. M-Soejima with heparin or caffeine was significantly higher than that of controI(p＜0.05). The result using glycerol(Gly), ethylene glycol(EG), propylene glycol(PG), and their mixture (Gly＋EG and Gly＋PG) as cryoprotectants, the highest motility was shown at the mixture treatment with Gly plus PG. However, the highest proportion of live spermatozoa was shown at Gly＋EG, there was no significantly difference among treatments(p＞0.05). When semen was pre-frozen with three manners(dryice-pellet, dryice-straw, and L$N_2$ vapor-straw), motility(%) of post-thaw spermatozoa was the highest in the L$N_2$ vapor-straw pre-freezing method of M-Soejima cryodiluent with 57.5% of motility, For a simple, economical and timesaving approach to freezing boar semen, total time required for freezing were 2, 5, and 7 hours, post-thaw motility were 43.8, 45.0 and 38.8%, NAR were 19.5, 22.7 and 28.5%, and viability were 20.8, 19.9 and 22.1%, respectively. This data suggests that boar semen diluted with M-Soejima cryodiluent contained caffeine, using mixture of glycerol and propylene glycol or ethylene glycol as cryoprotectants, frozen with 2 hours, can be taken better motility, NAR, and proportion of live spermatozoa.

• Journal of Conservation Science
• /
• v.25 no.3
• /
• pp.323-333
• /
• 2009

The Jincheonsagongnimaaeyeoraeipsang is a great stone relief Buddha in Goryeo Dynasty, transmitting sculptural styles of the Silla Kingdom. The Buddha was carved on the biotite granite basement, and was undergone cleaning treatment in 2007. The basement rock was opened in plenty cracks bringing out structural instability. And the top of the basement rock was colonized by trees obstructing sunshine and raising humidity. As a result of failure analysis, the basement rock of the Buddha had a major possibility of wedge failure in the parts of the face, hands and cloths. Therefore, the cracks were filled up with epoxy resin L-50, and titanium bars and wire ropes were applied to bind cracked rock blocks. The surface of the crack filler was colored by granite and talc powder with inorganic pigment and L-30. The crack meters were installed on the stone relief Buddha to monitor further behavior, lastly.

• Conservation Science in Museum
• /
• v.14
• /
• pp.29-35
• /
• 2013

In cases, such as white porcelain with openwork lotus scroll design, where the ceramics has intricate form and decorations, we normally use casts to restore the work, in that current restoration materials have short molding time which causes difficulties in delicate work. However, since using a cast for restoration requires longer work-time and uses more materials, we decided to restore in direct. Since the molding time in the restoration material is closely related to the workability, restoration material which secures longer work hours is necessary when directly restoring a complex form of body. Therefore we experimented on the work-time, color variation and workability as time passes by making mixtures of Epoxy putty and Baked clay in different ratios. As a result of the experiment, the mixture ratio of OS8:RQ2 turned out to be the most effective ratio.