• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.2
• /
• pp.407-415
• /
• 1993

This report presents an automatic measurement method of 3-dimensional profiles of free-formed surfaces, by using a touch a touch-trigger contact probe along with a conventional coordinate measuring machine. The method proceeds in three steps; The surface profile under consideration is traced by the probe in an automatic manner, and then its measured data is compensated by considering the actual probe radius. Finally the compensated data is rearranged in the form suitable for the further processings of CAD/CAM applications. Some experimental results are discussed to verify the validity of the method suggested in this study.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.3
• /
• pp.50-55
• /
• 2008

In this paper, we propose a new shape compensation scheme to make up for the difference in groove radius between the formed tools and the machined bearing raceways, which inherently takes place during machining the ball bearing raceways by the turning process using conventional formed tools. The associated conventional methods of the formed tool design and its modification such as a simple depth compensation method and a graphical compensation method are introduced and the latter, which has been known to be the better of the two, is experimentally investigated in detail to reveal its drawback. The algorithm is given and it is applied to develop a formed tool design program. The program developed by the presented approach is successfully applied to design the formed turning tool for the bearing raceways.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1927-1928
• /
• 2002

기존의 3차원 형상 측정법은 대부분 접촉식이기때문에 피측정물이 손상이 입거나 Probe의 보정이 필요하거나 Probe가 측정면에 직접 닿지 않는 경우는 측정이 불가능하였다. 또한 많은 점을 측정할 경우측정시간이 많이 걸린다. 물체의 크기가 크거나 측정하고자하는 물체가 무를 경우에는 적합하지 못하다. 이러한 단점은 보완하기 위하여 비접촉식인 측정법 이용한 관측이 대두되게 되었다. 비접촉식에 의한 관측은 물체의 표면을 손상시키지 않으면서 정밀하고 고품질이 요구되는 제품 검사 및 자동화 기술의 발달로 인하여 생산 산업 분야에 이용되고 있다 이에 비접촉식 방식에서도 광학간섭의 하나인 마이켈슨 간섭계를 이용하여 간섭무늬 패턴으로 물체 이미지를 분석하고 CCD카메라에서 영상을 얻어 3차원 물체를 해석하였다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2018.11a
• /
• pp.66-68
• /
• 2018

본 논문에서는 비디오로부터 추출된 프레임에서 3D 인체 모델의 복원하고 이를 부드럽게 재생될 수 있도록 보정하는 기법을 제안한다. 매개변수 기반의 모델을 사용하여 자세 및 체형을 복원하도록 접근하고 있다. 매개변수 기반의 인체 모델은 다양한 인체 데이터의 학습을 통해 만들어지며 입력 영상으로부터 최적의 자세와 체형 매개변수 값을 찾아 복원하게 된다. 자세 복원은 CNN 을 사용하여 영상으로부터 인체의 관절 위치를 추정하고 3D 모델로부터 2D 로 투영을 통해 관절 간의 거리가 최소화되는 매개변수 값을 찾아 복원한다. 형상 복원은 2D 영상으로부터 취득된 사람의 윤곽 데이터와 3D 모델의 윤곽 데이터 간의 매칭을 통해 복원된다. 이러한 단일 입력 영상에서 비디오와 같은 다중 입력 영상으로 확장하여 칼만 필터를 적용하여 오류 프레임을 검출하고 이전, 이후 프레임의 매개변수와의 보간을 통해 보다 자연스럽고 정확한 모델을 생성한다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.10a
• /
• pp.323-324
• /
• 2012

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.641-642
• /
• 2010

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1995.05a
• /
• pp.207-212
• /
• 1995

본 연구에서는 발전소 응축기를 시뮬레이션 할 수 있는 프로그램을 개발하였다. 관 내외 측 열전달계수의 계산에는 기존 상관식들과 응축 모델을 사용하였고 $\varepsilon$-NTU 방법을 사용하여 응축기를 해석하였다. 실제 응축기를 모사하기 위하여 관다발 보정계수 및 화울링 계수도 도입하였다. 이 프로그램을 사용하여 기존 평관을 대체할 전열촉진관의 형상을 도출하였다. 시뮬레이션 결과 전열촉진관을 사용하면 증기 응축 온도를 6 - 8 $^{\circ}C$ 정도 낮출 수 있음을 알 수 있었다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.6
• /
• pp.1319-1324
• /
• 2007

Accurately controlling the shape of the read/write head structure is critical in the performance of a modem hard disk drive. The sliders investigated are composed of alumina and titanium carbide(AITiC) and act as an air bearing when passing over the disks. Controlling the curvature of the slider is of primary importance. A laser scribing system that produces curvature by inducing residual stress into the slider can be utilized. Predicting the curvature created by a pattern of scribes is of great importance to increase the control over the sliders' shape. The force system that produces stresses similar to the laser scribing is applied to the finite element analysis model. The curvatures created by the force system are calibrated to experimental measurements.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.1
• /
• pp.71-80
• /
• 2013

According to design specifications for structural safety, a bridge in initial design step has been modelled to have larger self-weight, external loads and less stiffness than those of real one in service. Thereby measured buffeting responses of existing bridge show different distributions from those of the design model in design step. In order to obtain accurate buffeting responses of the in-site bridge, the analysis model needs to be modified by considering the measured natural frequencies. Until now, a Manual Tuning Method (MTM) has been widely used to obtain the Measurement-based Model(MBM) that has equal natural frequencies to the real bridge. However, since state variables can be selected randomly and its result is not apt to converge exact rapidly, MTM takes a lot of effort and elapsed time. This study presents Buffeting Response Correction Method (BRCM) to obtain more exact buffeting response above MTM. The BRCM is based on the idea the commonly used frequency domain buffeting analysis does not need all structural properties except mode shapes, natural frequencies and damping ratio. BRCM is used to improve each modal buffeting responses of the design model by substituting measured natural frequencies. The measured natural frequencies are determined from acceleration time-history in ordinary vibration of the real bridge. As illustrated examples, simple beam is applied to compare the results of BRCM with those of a assumed MBM by numerical simulation. Buffeting responses of BRCM are shown to be appropriate for those of in-site bridge and the difference is less than 3% between the responses of BRCM and MTM. Therefore, BRCM can calculate easily and conveniently the buffeting responses and improve effectively maintenance and management of in-site bridge than MTM.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.11
• /
• pp.3066-3073
• /
• 2009

Joint paths of master and branch pipes are induced mathematically for many kinds of joint patterns between both pipes in 3-axis pipe profile-cutting machines. By compensating them with a kerf width, the real cutting paths are determined, and their CL-data are generated, and the tool paths generated by CL-data are verified by a ghost function. A bevelling of welds is implemented through tilting a cutting torch in the $\beta$-axis direction for 8 sections in the chuck rotation of $\alpha$-axis. A PLC controls simultaneously position and velocity in a real time for $\alpha$, X, $\beta$-axis by loading CL-data generated. We developed the PLC-controlled 3-axis pipe profile-cutting system which can cut a master or branch pipe along the cutting path and simultaneously do a bevelling process.