• Title/Summary/Keyword: 보이드

Search Result 178, Processing Time 0.05 seconds

Fundamental Study of Degradation Diagnosis using AE Signals with Void Discharge in XLPE Insulation (XLPE 절연체의 트리 채널내 보이드방전에 의한 AE신호로 절연열화 검출 기법 연구)

  • Lee, Sang-Woo
    • Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.20 no.2
    • /
    • pp.75-80
    • /
    • 2006
  • In this paper, to detect and observation the void discharges pulse signal, AE signals and tree growth characteristics in case the high voltage is applied to a XLPE sample for a power cable. We also examined the partial discharge current pulse and AE signals with the increase of the applied voltage in XLPE insulation. The experimental results show that a branch-type tree grows in the presence of the voids, and a bush-type tree grows in the absence of the voids in both samples. A rate of tree growth increases abruptly in proportional to the deterioration time in the presence of the of the voids, but in the absence of the voids, a rate of tree growth decreases as time goes by and finally a breakdown occurs. The frequency band of AE signals that are generated from the partial discharges in a XLPE sample, one of solid dielectric materials, is about 1.0[MHz].

Partial Discharge Characteristics of Silicone Rubber for Insulators due to Appling Voltage Time (애자용 실리콘 고무의 전압인가시간에 따른 부분방전특성)

  • Kim, T.Y.;Lee, H.J.;Shin, H.T.;Lee, S.W.;Lee, C.H.;Hong, J.W.
    • Proceedings of the KIEE Conference
    • /
    • 2003.07c
    • /
    • pp.1454-1456
    • /
    • 2003
  • 전기절연재로서의 성능이 우수하며, 다른 물질과의 결합 및 성형의 편리성 및 경량화에 부합할 수 있는 실리콘 고무의 사용이 급증하고 있다. 이에 본 논문에서는 현수애자에 사용중인 실리콘 고무를 선택하여 제조시에 발생할 수 있는 내부보이드에 대한 전기적특성을 알아보기 위해 실리콘 고무를 3층으로 적층하여 중간층 중심에 비슷한 체적으로 인공보이드를 원통 및 삼각기등형의 보이드를 제작하여 보이드형상 변화에 따른 부분방전전하량을 측정하였다. 위상(${\Phi}$)-전하량(q)-빈도(n)에 대한 데이터를 3차원그래프로 나타냈으며, 또한 평균방전전류 및 방전전력 변화를 통한 보이드 결함 특성을 파악하였다. 그 결과, 전압인가 시간에 따라 원통보이드의 경우 초기에는 방전전류 및 방전전력이 증가 하다가 일정시간이 경과하면 감소하는 형태를 나타냈으며, 삼각기둥보이드의 경우 계속적으로 증가하는 모습을 보여주었다.

  • PDF

Application of ROBOID Studio to the control of LEGO NXT (레고 NXT의 제어를 위한 로보이드 스튜디오의 응용)

  • Lim, J.;Lee, S.;Kim, J.;Kim, K.;Suh, I.H.
    • Proceedings of the KIEE Conference
    • /
    • 2008.10b
    • /
    • pp.351-352
    • /
    • 2008
  • 네트워크 기반의 씬 클라이언트 로봇은 내장된 리소스가 부족하지만 네트워크를 통해 이를 극복하려는 로봇이다. 씬 클라이언트 로봇에는 부족한 내장 리소스를 네트워크를 통해 효과적으로 운영하기 위한 디바이스 맵 프로토콜과 로봇 제어 및 개발 플랫폼으로써 로보이드 스튜디오가 제안되어 있다. 현재 로보이드 스튜디오는 공개 소프트웨어 방식으로 다양한 로봇을 지원하지만, 아직은 실제 지원되는 로봇의 종류가 부족하다. 따라서 새로운 로봇에 대한 이식 지원 방법과 다양한 이식 환경 속에서 문제점을 찾아 해결해야 한다. 우리는 첫 번째로 씬 클라이언트 로봇보다는 내장 리소스가 풍부하며, 광범위한 사용자층을 갖고 있는 LEGO NXT를 선택하여 로보이드 스튜디오 운영 및 개발 환경의 이식 절차를 제안하고, 로보이드 스튜디오 프레임워크가 제공하는 네트워크 기반 로봇 제어 기술의 성능을 검증한다.

  • PDF

Characteristic of Electrical Degradations due to Variation of Internal Void Shape (내부보이드 형상변화에 따른 전기적열화특성)

  • Kim, T.Y.;Kim, K.S.;Ko, K.Y.;Lee, S.W.;Lee, C.H.;Lee, C.H.;Kim, G.Y.;Hong, J.W.
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2003.05d
    • /
    • pp.82-85
    • /
    • 2003
  • 산업의 고도화 및 환경오염의 문제로 1970년대부터 실리콘고무를 이용한 애자의 사용이 시도되기 시작되었다. 그로 인해 실리콘 고무의 표면열화에 대한 수많은 연구가 현재까지 행해지고 있다. 그러나 고온성 형압즉방식으로 제작하는 유기애자의 경우 제조시 발생할 수 있는 내부보이드에 대한 연구는 미흡한 현실이다. 이에 본 연구에서는 실리콘고무의 내부보이드의 형태변화에 따른 전기적열화특성을 연구하기 위하여 3층으로 적층시킨 실리콘 고무의 중간층에 임의적으로 4가지형태의 내부보이드를 성형하여 전압을 변화시키면서 방전전류 및 방전전력을 측정하였다. 그 결과, 보이드의 존재로 방전전류 및 방전전력의 증가를 볼 수 있었으며, 보이드형상의 내부각이 좁을수록 방전전류 및 방전전력값이 커지는 것을 볼 수 있었다.

  • PDF

An Efficient Flocking Behaviors for Large Flocks by Using Representative Boid (대표 보이드를 이용한 대규모 무리의 효율적인 무리짓기)

  • Lee, Jae-Moon
    • Journal of Korea Game Society
    • /
    • v.8 no.3
    • /
    • pp.87-95
    • /
    • 2008
  • This paper proposes an algorithm for efficient behaviors of boids which freely move and have no predefined position. By finding the kNN and computing the value of behavioral characteristic of a boid approximately, the proposed algorithm improves the conventional spatial partitioning one. To do this, this paper defines and uses the representative boid which has the average direction and position for a group of boids. The proposed algorithm was implemented and compared with the conventional one experimentally. The results of the experimental comparisons show that the proposed algorithm outperforms the conventional one about $-5{\sim}130%$ in terms of the ratio of the number of rendering frames per the second.

  • PDF

진공 몰드를 이용한 제품의 안정화 연구

  • 김선오;허용정
    • Proceedings of the Korean Society Of Semiconductor Equipment Technology
    • /
    • 2005.05a
    • /
    • pp.107-110
    • /
    • 2005
  • 몰딩 공정중에 발생된 보이드(void)는 제품의 기계적인 물성치에 큰 영향을 준다. 미세균열(micro crack)이나 박리(delamination)등의 결함을 유발하는 보이드의 형성을 최소화시킬 수 있는 방법으로 진공 몰드를 제시하였다. 본 연구에서는 대기압 상태와 진공 상태에서 나타나는 유동 선단에서의 보이드 생성과 소멸을 실험관찰 하였고 몰드 패키지의 현상을 실험적으로 비교하였다. 아울러 진공 몰드의 공정 이론과 조건을 구하였다.

  • PDF

Fuzzy flocking method for boid's ecosystem behavior modeling (보이드들의 생태계 행동 모델링을 위한 퍼지 플로킹 기법)

  • 권일경;이상용
    • Proceedings of the Korean Information Science Society Conference
    • /
    • 2003.10a
    • /
    • pp.73-75
    • /
    • 2003
  • 게임 세계에 존재하는 수많은 보이드들의 지능적인 집단 행동을 모델링하기 위한 방법으로 플로킹 기법이 많이 사용되고 있다. 특히 생태계에 존재하는 객체들의 행동을 재현하기 위한 연구가 활발하게 진행되고 있는 실정이다. 따라서 본 연구에서는 생태계에서 흔히 볼 수 있는 먹고 먹히는 관계를 퍼지 논리를 통해 게임의 보이드 행동을 모델링하고 구현한다.

  • PDF

An Efficient Incremental Maintenance Method for Data Cubes in Data Warehouses (데이타 웨어하우스에서 데이타 큐브를 위한 효율적인 점진적 관리 기법)

  • Lee, Ki-Yong;Park, Chang-Sup;Kim, Myoung-Ho
    • Journal of KIISE:Databases
    • /
    • v.33 no.2
    • /
    • pp.175-187
    • /
    • 2006
  • The data cube is an aggregation operator that computes group-bys for all possible combination of dimension attributes. %on the number of the dimension attributes is n, a data cube computes $2^n$ group-bys. Each group-by in a data cube is called a cuboid. Data cubes are often precomputed and stored as materialized views in data warehouses. These data cubes need to be updated when source relation change. The incremental maintenance of a data cube is to compute and propagate only its changes. To compute the change of a data cube of $2^n$ cuboids, previous works compute a delta cube that has the same number of cuboids as the original data cube. Thus, as the number of dimension attributes increases, the cost of computing a delta cube increases significantly. Each cuboid in a delta cube is called a delta cuboid. In this paper. we propose an incremental cube maintenance method that can maintain a data cube by using only $_nC_{{\lceil}n/2{\rceil}}$ delta cuboids. As a result, the cost of computing a delta cube is substantially reduced. Through various experiments, we show the performance advantages of our method over previous methods.

A Stud on the Self Healing Characteristics of MPPF by Voids (보이드에 의한 MPPF의 셀프힐링 특성 연구)

  • 박하용;곽희로
    • Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.14 no.4
    • /
    • pp.77-82
    • /
    • 2000
  • This paper describes the self healing characteristics of a metalized polypropylene film(MPPF) by voids under a.c condition. PDIVs were increased with the number of pre-self healing due to void defects, and several pre-self healing events took place at lower voltage than the critical breakdown voltage of a PPF. Self healing mainly occurred at pin tips, wrinkle sides, and cross points of wrinkles, and the main self healing voltage was increased with PPF thickness. The burn out area at self healing was increased with the applied voltage, and the peak currents in a grounding conductor at self healing was also increased with the applied voltage.

  • PDF