• Transactions of Materials Processing
• /
• v.26 no.2
• /
• pp.121-126
• /
• 2017

The hot stamping process is an innovative forming method that could prevent the cracking of high strength steel sheets. The formability test of boron steel sheet using forming limit diagrams at elevated temperature is very complicated and time consuming job. In this paper, an alternative test method to evaluate the formability of boron steel in hot stamping has proposed. It measured the FLD0 instead of whole strain combinations of FLD with the tensile test machine and specially designed test rig. Test results shows that the proposed test method can simulate the plain strain condition fracture and can make the FLD of boron steel sheet at elevated temperature with less effort.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.10a
• /
• pp.217-222
• /
• 1995

1994년 11월에 나타난 고리 1호기 증기발생기의 전열관 누설에 대한 원인 조사결과, 손상원인은 2차측 응력부식균열(ODSCC)로 밝혀졌으므로, 이에 따른 단기적인 손상완화대책으로 (1) TiO$_2$와 보론산을 첨가한 틈새 세정, (2) TiO$_2$를 첨가한 하이드라진 담금, (3) $Na^{+}$/Cl$^{-}$ 몰비 조절, (4) 용존산소 제거, (5) T$_{HOT}$ 감소 등을 선정하였다. 이와 같은 완화 대책을 적용한 경우의 ODSCC 손상진전율을 확률론적으로 분석한 결과, 증기발생기교체(1998년 예정) 이전까지 전열관 누설에 의한 운전정지 가능성은 매우 낮게 나타났다.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1708-1709
• /
• 2011

본 논문에서는 Ambipolar 실리콘 나노와이어 FET (SiNW FET)의 빛을 통한 모듈래이션을 분석하였다. Ambipolar SiNW FET를 얻기 위해서는 나노와이어가 저농도로 도핑된 실리콘이어야 한다. 실리콘의 비등방성 습식식각 이후, 산화 공정을 통한 나노와이어 제작을 통해 보론의 확산을 통해 저농도로 도핑된 실리콘 나노와이어를 제작하였다. 빛이 조사될 시에 생기는 Ambipolar SiNW FET의 모듈래이션 특성에 관해 분석하고 간단한 응용 실험을 통하여 검증하였다. 응용 실험 결과 pH 센싱의 감도는 빛을 10000 lux 조사할 경우 8.84 배 증가하였다.

• Journal of Welding and Joining
• /
• v.34 no.5
• /
• pp.1-5
• /
• 2016

The hardness of laser weldments has been predicted by using several carbon equivalent equations and estimation models. In this study, authors extended the model to boron steel sheets which are adopted for the hot press forming process. four kinds of boron steels with the strengths from 1500 MPa to 1900 MPa were considered and the hardness profiles of weldments was measured from the experiments of this study and the references. The traditional "Kaizu" equation could predict the hardness with an accuracy of -4.9% error although the Kaizu equation does not consider the boron content. Modified carbon equivalents were suggested by adding a term as like 5B or 14B into the Kaizu equation, and it could improve the accuracy of the prediction model.

• Tribology and Lubricants
• /
• v.8 no.1
• /
• pp.63-69
• /
• 1992

In order to gain better understanding of wear behaviors of TiN-coated boron cast iron, tests and analyses were conducted with block-on disc type tribometer. TiN layer of thickness $2 \mu m$ and $4 \mu m$, coated by cathodic arc evaporation process, were experimentally investigated with the variation of applied load and sliding speed under dry sliding condition. Wear characteristics were expressed in terms of the three-dimentional wear map as well as the wear rate vs sliding speed and load. Comparisons of wear and friction characteristics between coated cast irons and uncoated cast irns were also made. Wear mechanism of TiN layer was explained in view of surface interaction between the mating surfaces. The thicker coating exhibited higher hardness and adhesion strength. the significance of stresses at the surface and in the subsurface was briefly discussed in relation to the wear behavior.

• Journal of Welding and Joining
• /
• v.9 no.3
• /
• pp.26-33
• /
• 1991

As it takes very long time for the Transient Liquid Phase(TLP) bonding, we tried to reduce the bonding time by changing insert material for the high diffusivity element. On this study boron powder was doped as a insert material on the bonding surface of Rene 80 superalloy, and diffusion treated at 1150.deg.C under vacuum. On this method differently from the TLP bonding the insert material was not melted during bonding but only the base metal reacted with the boron was inducedly melted. Therefore, as this bonding mechanism is different from the existing ones, it is suggested as a Melting Induced Diffusion Bonding. When this process was used for the diffusion bonding, the bonding time including homogenization decreased greatly compared to the conventional TLP bonding.

• Transactions of Materials Processing
• /
• v.23 no.8
• /
• pp.475-481
• /
• 2014

Water quenching is one method of cooling after hot forming, which is presently being used for the manufacturing of automobile parts. The formed parts at room temperature are heated and then cooled rapidly in a water bath to produce high strength. The formed parts may undergo excessive thermal distortion during the water quench. In order to predict the distortion during water quenching, a coupled thermo-mechanical simulation is needed. In the current study, the simulation of heating and cooling of boron steel cylinders was performed. The material properties for the simulation were calculated from JMatPro, and the convective heat transfer coefficient was obtained from experimental tests. The results show that the thermal distortion and the residual stresses are well predicted by the coupled simulation.

• Journal of Environmental Science International
• /
• v.29 no.2
• /
• pp.201-207
• /
• 2020

A new chemosensor based on a self-assembled system has been devised to detect Hg²⁺ions efficiently. We demonstrated that the amphiphilic building blocks consisting of pyrene and boronic acid (1) aggregate in aqueous solutions and provide an outstanding sensing platform for sensitive detection. The self-assembled 1 exhibited high selectivity and sensitivity for Hg²⁺ion detection via fluorescence quenching, where the Hg²⁺ion detection ensued from a fast transmetallation of 1. The Stern-Volmer (SV) quenching constant for its fluorescence quenching by Hg²⁺ions was approximately 1.58 × 10⁸ M^-1. In addition, self-assembled 1 exhibited excellent sensing abilities at nano-molar concentration levels when tap water and freshwater samples were contaminated with of Hg²⁺ ions.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.9
• /
• pp.2368-2373
• /
• 1994

The advancement of the mechanical properties of metal materials caused by a recent high technology contributes to the stability and productivity of mechanical structures. However, the advanced mechanical properties depends on the conditions of crystal boundaries and the improvement of the texture. Although the tensile strength and a hardness of a steel would be increased by the adding B, it seems to be a marked decreases of the toughness which caused in the weaken workability. This study is concerned with a characteristics of the B compound which will be mixed with $H_3BO_3$ and the metallic magnesium. What affected in the mechanical property and texture is checked by the strength and the texture test. As a result, it is shown that the improvement of the mechanical property and the texture homogeneity. In addition, it seems that a molten metal which is added by the B compound is deoxized and cleansed.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.10a
• /
• pp.469-474
• /
• 1995

피동형 원자로에서 냉각수 펌프의 작동불능시나 계통내의 강제순환이 충분치 못할 경우, 냉각수와 분리된 비상저온 고농축의 붕산수를 노심에 피동으로 주입시키고 자연대류에 의한 잔열제거가 이루어져야 한다. PIUS형 원자로나 SPWR형 원자로에서는 Honeycomb구조의 Density Lock을 사용하여 Shutdown 및 잔열제거기능을 수행하며 정상운전시에는 Primary Coolant(고온, 저농축 붕산수)와 Pool Water(저온, 고농축 붕산수)를 분리하고 있다. Density Lock을 사용할 경우 기동운전이나 출력변경과 같은 비정상 운전시 Density Lock의 경계가 불안정하고 제어가 용이치 않으므로 Pool의 저온, 고농축 보론수가 Density Lock을 통하여 노심으로 유입될 수 있다. 따라서 불필요한 Pool Water의 유입을 방지하고 피동형 원자로의 설계개념을 만족시키며, 피동적으로 강제순환으로부터 자연순환으로의 경로를 열어줄 수 있는 Hydraulic Valve에 대한 이론적 해석을 수행하여 모델밸브의 주요변수와 제원을 결정하였다.