Kim, Sang-Hoon;Lee, Jong-Ho;Lee, Kyung-Sub;Hwang, Byoung-Chul;Lee, Chang-Gil;Lee, Chang-Hee
Proceedings of the KWS Conference
/
2009.11a
/
pp.60-60
/
2009
본 연구는 보론이 첨가된 저합금강 용접 열영향부에서의 보론 편석 거동 연구를 위해 보론이 10ppm 첨가된 저합금강을 이용하여 다양한 용접 입열량 및 외부 응력에 따른 용접부 CGHAZ의 보론 편석거동을 분석하였다. 이를 위해 Gleeble 시스템을 이용하여 다양한 입열량에 따른 CGHAZ를 열 및 열-응력 사이클을 통하여 재현하였다. 재현된 시편의 미세조직은 OM을 통하여 분석하고, 보론의 편석거동을 SIMS와 PTA 분석법을 통하여 분석하였다. 그 결과 입열량에 따른 보론의 편석 거동은 최초 입열량이 증가함에 따라 보론의 편석이 증가하다가 다시 감소하였는데 이는 비평형 편석 후 고온에서 유지시간이 길어짐에 따라 back diffusion 발생에 따른 영향으로 판단된다. 또한 외부 응력에 의한 보론 편석 거동 분석 결과, 용접 열 사이클 중 작용하는 외부 응력에 의해 결정립계 편석 감소하였는데 이는 외부 응력에 의한 오스테나이트 결정립 크기 감소에 따른 결정립계 증가의 영향으로 판단된다.
Proceedings of the Korean Vacuum Society Conference
/
2011.02a
/
pp.269-269
/
2011
핵융합로에서 챔버 벽면의 보호와 입자 문제를 해결하기 위해 최근 챔버 벽면의 보론 박막 코팅에 대한 연구가 활발히 연구 중이다. 핵융합로 운전 시 챔버 벽면 부근의 플라즈마는 저온 플라즈마와 상태가 비슷해 저온 플라즈마에서의 표면분석 기술을 적용할 수 있다. 이를 이용해 보론이 증착된 벽면의 상태를 실시간으로 관찰할 수 있다. 본 연구에서는 이에 앞서 저온 플라즈마에서 보론이 증착된 시편을 가지고 두께를 측정해 보았다. 증착 시편의 훼손된 부분은 보정법을 이용하여 보정하였다. 측정 결과 보정 전에는 시편마다 많은 차이를 보였지만 보정 후에는 거의 일정한 결과를 얻었으며 광학적 방법에 의해 측정한 두께와도 비슷한 결과를 얻었다. 저온 플라즈마 실험 결과 보론 박막 측정에 대한 신뢰성을 확인하였으며 이를 바탕으로 KSTAR의 벽면 진단에 적용함으로써 핵융합 플라즈마의 불안정성을 간접적으로 측정할 수 있는 가능성을 확인하였다.
Distribution data of boric acid in water is necessary to develop a hydrometallurgical process for the recovery of boron from primary and secondary resources containing boron. Boric acid exists as $B(OH)_3$ and $B(OH)_4{^-}$ when solution pH is less than 6 and higher than 12, respectively. In the solution pH range of 6-11, condensation reaction between $B(OH)_3$ and $B(OH)_4{^-}$ results in the formation of some polymers. The mole fraction of the boron polymers such as $B_3O_3(OH)_4{^-}$ and $B_4O_5(OH){_4}^{2-}$ is proportional to the concentration of boric acid.
Transactions of the Korean Society of Mechanical Engineers A
/
v.39
no.1
/
pp.89-94
/
2015
This study was conducted to compare the laser weldability of boron steel and hot-stamped steel. In general, boron steel is used in the hot-stamping process. Hot-stamping is a method for simultaneously forming and cooling boron steel in a press die after heating it to the austenitizing temperature. Hot-stamped steel has a strength of 1500 MPa or more. Thus, in this study, the laser weldability of boron steel and thet of hot-stamped steel were investigated and compared. A continuous wave disk laser was used to produce butt and lap joints. In the butt welding, the critical cooling speed at which full penetration was obtained in the hot-stamped steel was lower than that of boron steel. In the lap welding, the joint widths were similar regardless of the welding speed when full penetration was obtained.
Kim, Chan-Seok;Park, Seong-Eun;Lee, Hae-Seok;Kim, Dong-Hwan
Proceedings of the Korean Vacuum Society Conference
/
2014.02a
/
pp.474-474
/
2014
Boron-rich Layer (BRL) 는 결정질 실리콘 태양전지를 제작하는 과정 중 보론 확산 공정 시 형성된다. 본 연구에서는, n-type 실리콘 태양전지에서 BRL의 구조적, 광학적, 전기적 특성을 조사하였다. 보론 에미터는 튜브 형식의 열처리 로에서 $950^{\circ}C$의 온도 하에서 BBr3 액상 소스를 이용하여 형성하였다. BRL은 비정질 상을 보였고, $1023atoms/cm^3$이 넘는 보론 농도를 나타내었다. BRL은 보론, 실리콘, 산소로 구성되었고, 산소는 비정질 상 형성의 원인으로 추정되고 있다. BRL은 1.5~2.0의 굴절률을 나타내었고, $0.8m{\Omega}{\cdot}cm^2$의 접촉 저항을 보였다.
Transactions of the Korean Society of Mechanical Engineers A
/
v.34
no.10
/
pp.1419-1425
/
2010
Boron steel sheet is suitable for fabricating automobile parts because it is very strong and has low weight. Recently, many car makers are investigating the feasibility of fabricating the chassis part of automobiles using boron steel. In order to use boron steel sheets to fabricate the chassis part of automobiles, much better material property of low cycle fatigue life as well as high formability during hot stamping is required. Therefore, the low-cycle fatigue life of hot-stamped quenched boron steel was investigated in this study. The fatigue life observed at low strain amplitude was longer than that of an as-received boron steel sheet. However, the fatigue life reduced at high strain amplitude because of the low ductility and low fracture toughness of martensite, which was produced as a result of hot stamping.
Transactions of the Korean Society of Mechanical Engineers A
/
v.35
no.4
/
pp.383-391
/
2011
The hot-stamping technique is used to manufacture high-strength parts by press forming by heating at a temperature above the Austenite transformation temperature and then rapid cooling. Boron steel, which contains a very small amount of boron, is one of the materials used for hot stamping. The purpose of this study is to show the microstructures and to investigate the mechanical properties under different heat-treatment conditions. The heat treatment of water quenching was conducted at the various temperatures and different elapsed times. These can be practical data useful when boron steels are used for hot stamping. Furthermore, the microstructures and mechanical properties of the spot-welded specimen with coatings and counterpart materials (SPRC 340, SPRC 590) is investigated in order to determine the welding characteristics of boron steel at different welding condition.
Journal of the Korean Society of Propulsion Engineers
/
v.18
no.4
/
pp.26-32
/
2014
The combustion characteristics of Boron-beads to improve the energy density of gas generator has been investigated in accordance with diameter of beads and their composition. In this paper, electrically heated tungsten sheet and visualized furnace are applied to measure ignition temperature and burning time of bead respectively. The results proposes ignition temperature between 720~800 K and burning time proportional to bead diameter. Also a ignition delay of boron particle is detected through the temperature and radiation intensity measurements.
Ha, Jin-Uk;Hong, Jinho;Kim, Minjae;Choi, Jin Kyu;Park, Dong Wha;Shim, Sang Eun
Polymer(Korea)
/
v.37
no.6
/
pp.722-729
/
2013
In order to enhance the thermal conductivity of poly(dimethyl siloxane) (PDMS), boron nitride (BN) and carbon nanotubes (CNTs) were incorporated as the thermally conductive fillers. The amount of BN was increased from 0 to 100 phr (parts per hundred rubber) and the amount of CNTs was increased from 0 to 4 phr at a fixed amount of the boron nitride (100 phr). The thermal conductivity of the composites increased with an increasing concentration of BN, but the incorporation of CNTs had only a slight effect on the enhancement of thermal conductivity. Unexpectedly, the thermal degradation of the composites was accelerated by the addition of CNTs in 100 phr BN filled PDMS. Activation energy for thermal decomposition of the composites was calculated using the Horowitz-Metzger method. The curing behavior, electrical resistivity, and mechanical properties of PDMS filled with BN and CNTs were investigated.
Journal of the Korean Society of Propulsion Engineers
/
v.19
no.6
/
pp.72-80
/
2015
Recently air breathing propulsion system is much interested in relatively comparing to the conventional chemical propulsion, and the R&D of this area is performed much more including the basic research of the solid ramjet in our country. The boron is applied to the solid fuel because of its high heating value, but it has a complicated combustion characteristics. therefore many researches have been studied in this area. In this paper the combustion characteristics of the boron have been investigated through the published papers for the purpose of the ramjet fuel application.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.