• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.2
• /
• pp.74-88
• /
• 2020

A Cooperative Intelligent Transportation System (CITS) provides useful information on upcoming hazards in order to prevent vehicle collisions. In addition, the availability of individual vehicle travel information obtained from the CITS infrastructure allows us to identify the level of road safety in real time and based on analysis of the indicators representing the crash potential. This study proposes a methodology to derive road safety content, and presents evaluation results for its applicability in practice, based on simulation experiments. Both jerk and Stopping Distance Index (SDI) were adopted as safety indicators and were further applied to derive road section safety information. Microscopic simulation results with VISSIM show that 5% and 20% samples of jerk and SDI are sufficient to represent road safety characteristics for all vehicles. It is expected that the outcome of this study will be fundamental to developing a novel and valuable system to monitor the level of road safety in real time.

• Fire Science and Engineering
• /
• v.34 no.3
• /
• pp.67-75
• /
• 2020

In this study, the risk of heat generation due to normal and overload currents that vary with the abnormal loosening angle of wire-connecting bolts were identified. The risks were analyzed based on the thermal characteristics to minimize the carbonization accidents of terminal blocks inside distribution panels typically used in industrial sites. We applied a method for measuring the heating temperature and temperature variations in the terminal blocks in real-time by installing a resistance temperature detector sensor board in the terminal block. The experimental results showed that the terminal block model with a low-rated current exhibited a higher heating temperature, thus, confirming the need to select the terminal block capacity based on load currents. Additionally, the higher the rated current of the terminal block with a high-rated current and the higher the degree of loosening, the faster the carbonization point. Such heating temperature monitoring enabled real-time thermal temperature measurement and a step-by-step risk level setting through thermal analysis. The results of the measurement and analysis of carbonization risks can provide a theoretical basis for further research regarding the risk of fire due to carbonization. Furthermore, the deterioration measurement method using the temperature sensor board developed in this study is widely applicable to prevent fires caused by poor electrical contact as well as risk-level management.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.2
• /
• pp.117-132
• /
• 2014

This paper had a purpose on analyzing result data from pan-sharpening, which have applied on the KOMPSAT-2 and -3 image. Particularly, the study focused on comparing each relative spectral response functions, which considers to cause color distortions of fused image. Two images from same time and location have been collected by KOMPSAT-2 and -3 to apply in the experiment. State-of-the-art algorithms of GIHS, GS1, GSA and GSA-CA were employed for analyzing the results in quantitatively and qualitatively. Following analysis of previous studies, GSA and GSA-CA methods resulted excellent quality in both of KOMPSAT-2/3 results, since they minimize spectral discordances between intensity and PAN image by the linear regression algorithm. It is notable that performances from KOMPSAT-2 and- 3 are not equal under same circumstances because of different spectral characteristics. In fact, KOMPSAT-2 is known as over-injection of low spatial resolution components of blue and green band, are greater than that of the PAN band. KOMPSAT-3, however, has been advanced in most of misperformances and weaknesses comparing from the KOMPSAT-2.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.539-547
• /
• 2002

본 연구는 풋콩 탈협기 개발을 위한 기초연구로서 풋콩 탈협기의 급치를 교환할 수 있고, 급동의 주속도와 송풍팬의 회전속도 및 공기 흡입구의 개구면적을 조절할 수 있는 실험장치를 제작하고, 급치의 종류가 풋콩의 탈협 및 손상에 미치는 영향을 분석하였다. 또한 송풍팬의 회전속도와 흡입 공기구의 개구비 변화 따른 선별 성능을 분석하였다. 그 결과를 요약하면 다음과 같다. 1 급치의 종류에 따른 풋콩의 미 탈협율은 철선 급치가 최대 1.6%, 최소 0.0%,평균 0.7%로서 가장 낮게 나타났고, 그 다음이 경도 60의 고무제 급치로서 최대 2.0%, 최소 0.0% 평균 1.1%, 경도 80의 고무제 급치는 최대 2.5%, 최소 0.0% 평균 1.7% 순으로 높아졌다. 또한 풋콩의 미탈협율은 급동 원주속도가 18m/s에서 55m/s로 증가할수록 감소하였다. 이는 급동의 원주 속도가 증가함에 따라 급치의 선단이 풋콩 꼬투리에 가하는 타격력이 증가하기 때문인 것으로 생각된다. 2. 급치의 종류에 따른 풋콩의 손상율은 경도 80의 고무제 급치는 최대 5.2%, 최소 1.3%, 평균 2.8%로서 가장 낮게 나타났고, 그 다음이 경도 60의 고무제 급치로서 최대 5.7%, 최소 2.4% 평균 3.8%, 철선 급치는 최대 6.3%, 최소 2.6% 평균 4.2% 순으로 높아졌다. 또한 풋콩의 손상율은 급동 원주속도가 증가할수록 풋콩 꼬투리의 손상율은 증가하였다. 이 또한 급등의 원주 속도가 증가함에 따라 급치의 선단이 풋콩 꼬투리에 가하는 타격력이 증가하기 때문인 것으로 생각된다. 3. 공기흡입구의 개구면적을 증가시킬수록 선별율은 높게 나타났으나 개구비가 60%이상에서는 선별율이 크게 차이가 나지 않았으며, 송풍팬의 원주속도를 높일수록 선별율은 높게 나타났다.도 콤바인이 직선구간 및 선회구간을 주행하며 수확작업이 가능함을 알 수 있었다. 그러나 곡선구간에서는 최대오차가 65.5 cm로 매우 크게 나타나, 콤바인을 무인 자율주행으로 수확하기에는 어려움이 있는 것으로 나타났다. 실제 포장은 이론적인 완전한 직선보다는 작은 굴곡이 있는 곡선의 형태가 이루어져 있으므로 주행 오차를 감소하기 위해서는 기계시각을 이용하면 보다 정밀한 조향을 이룰 수 있을 것으로 예상된다. 포장에서 DGPS 신호, 자이로 센서 등을 이용한 콤바인의 무인주행 장치는 무인 수확작업을 위한 가능성을 보여주었고, 일부의 센서의 기능을 개선하면 만족한 성능을 나타낼 수 있을 것으로 판단된다.dislocations form local defect arrangements at the grooves permitting the substantial reduction in defect density over the remainder of the interfacial area.한 최대의 감자 재배지역을 형성하였다. 제주도는 산지지형과 따뜻한 기온으로 2기작이 가능하고, 감자가공 공장설립과 교통발달에 따른 육지 시장과의 접근이 용이해졌기 때문에 남한에서 2번째로 큰 감자재배지역이 되었다.(요약 및 결론에서 발췌)그람양성균에서 효과적이었으며, 농도별 항균력시험 결과 농도가 증가할수록 비례하여 저해율도 증가함을 알 수 있었다. 첨가농도를 달리하여 미생물의 생육도를 측정한 결과, fraction II磎꼭\ulcorner경우 그람양성균에 대해 500 ppm 이상에서 뚜렷한 증식억제효과를 나타내었다.서 뚜렷한 증식억제효과를 나타내었다.min/+}$계 수컷 이형접합체 형질전환 마우스에 AIN-76A 정제사료만을 투여한 대조군은 1.40$\pm$

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.1
• /
• pp.80-87
• /
• 2016

In this work, we conduct a thermal pointing error analysis of the observation satellites considering seasonal and daily temperature variation with interpolated temperature based on prescribed average temperature (PAT) method. Maximum 200 degree temperature excursion is applied to the observation satellites during on-orbit operation, which cause the line of sight (LOS) to deviate from the designated pointing direction due to thermo-elastic deformation. To predict and adjust such deviation, the thermo-elastic deformation analysis with a fine structural finite element model is accomplished with interpolated thermal maps calculated from the results of on-station thermal analysis with a coarse thermal model. After verifying the interpolated temperatures by PAT with two benchmark problems, we evaluate the thermal pointing error.

• Korean Journal of Remote Sensing
• /
• v.19 no.4
• /
• pp.307-317
• /
• 2003

This paper presents an algorithm that automatically extracts buildings among many different features on the earth surface by fusing LIDAR data with panchromatic aerial images. The proposed algorithm consists of three stages such as point level process, polygon level process, parameter space level process. At the first stage, we eliminate gross errors and apply a local maxima filter to detect building candidate points from the raw laser scanning data. After then, a grouping procedure is performed for segmenting raw LIDAR data and the segmented LIDAR data is polygonized by the encasing polygon algorithm developed in the research. At the second stage, we eliminate non-building polygons using several constraints such as area and circularity. At the last stage, all the polygons generated at the second stage are projected onto the aerial stereo images through collinearity condition equations. Finally, we fuse the projected encasing polygons with edges detected by image processing for refining the building segments. The experimental results showed that the RMSEs of building corners in X, Y and Z were 8.1cm, 24.7cm, 35.9cm, respectively.

• Korean Journal of Remote Sensing
• /
• v.15 no.2
• /
• pp.131-146
• /
• 1999

The satellite visible data have been successfully applied to study the ocean color. Another ocean color sensor, the Ocean Scanning Multi-spectral Imager (OSMI) on the Korea Multi-Purpose Satellite (KOMPSAT) will be launched in 1999. In order to understand the characteristics of future OSMI images, we have first discussed the simulation models and procedures in detail, and produced typical patterns of radiances at visible bands by using radiative transfer models. The various simulated images of full satellite passes and Korean local areas for different seasons, water types, and the satellite crossing equator time (CET) are presented to illustrate the distribution of each component of radiance (i.e., aerosol scattering, Rayleigh scattering, sun glitter, water-leaving radiance, and total radiance). A method to evaluate the image quality and availability is then developed by using the characteristics of image defined as the Complex Signal Noise Ratio (CSNR). Meanwhile, a series of CSNR images are generated from the simulated radiance components for different cases, which can be used to evaluate the quality and availability of OSMI images before the KOMPSAT will be placed in orbit. Finally, the quality and availability of OSMI images are quantitatively analyzed by the simulated CSNR image. It is hoped that the results would be useful to all scientists who are in charge of OSMI mission and to those who plan to use the data from OSMI.

• Korean Journal of Remote Sensing
• /
• v.23 no.4
• /
• pp.257-272
• /
• 2007

This paper analyzed relationships between various features from SAR data with multiple acquisition dates and mode (frequency, polarization and incidence angles), and land-cover classes. Two typical types of features were extracted by considering acquisition conditions of currently available SAR data. First, coherence, temporal variability and principal component transform-based features were extracted from multi-temporal and single mode SAR data. C-band ERS-1/2, ENVISAT ASAR and Radarsat-1, and L-band JERS-1 SAR data were used for those features and different characteristics of different SAR sensor data were discussed in terms of land-cover discrimination capability. Overall, tandem coherence showed the best discrimination capability among various features. Long-term coherence from C-band SAR data provided a useful information on the discrimination of urban areas from other classes. Paddy fields showed the highest temporal variability values in all SAR sensor data. Features from principal component transform contained particular information relevant to specific land-cover class. As features for multiple mode SAR data acquired at similar dates, polarization ratio and multi-channel variability were also considered. VH/VV polarization ratio was a useful feature for the discrimination of forest and dry fields in which the distributions of coherence and temporal variability were significantly overlapped. It would be expected that the case study results could be useful information on improvement of classification accuracy in land-cover classification with SAR data, provided that the main findings of this paper would be confirmed by extensive case studies based on multi-temporal SAR data with various modes and ground-based SAR experiments.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.3
• /
• pp.242-250
• /
• 2019

In this paper, we propose a method to predict the failure of industrial robot using Seq2Seq (Sequence to Sequence) model, which is a model for transforming time series data among Artificial Neural Network models. The proposed method uses the data of the joint current and angular value, which can be measured by the robot itself, without additional sensor for fault diagnosis. After preprocessing the measured data for the model to learn, the Seq2Seq model was trained to convert the current to angle. Abnormal degree for fault diagnosis uses RMSE (Root Mean Squared Error) during unit time between predicted angle and actual angle. The performance evaluation of the proposed method was performed using the test data measured under different conditions of normal and defective condition of the robot. When the Abnormal degree exceed the threshold, it was classified as a fault, and the accuracy of the fault diagnosis was 96.67% from the experiment. The proposed method has the merit that it can perform fault prediction without additional sensor, and it has been confirmed from the experiment that high diagnostic performance and efficiency are available without requiring deep expert knowledge of the robot.

• Korean Journal of Remote Sensing
• /
• v.34 no.6_2
• /
• pp.1215-1227
• /
• 2018

Sea ice motion is an important factor for assessing change of sea ice because the motion affects to not only regional distribution of sea ice but also new ice growth and thickness of ice. This study presents an application of multi-temporal high-resolution optical satellites images obtained from Korea Multi-Purpose Satellite-2 (KOMPSAT-2) and Korea Multi-Purpose Satellite-3 (KOMPSAT-3) to measure sea ice motion using SIFT (Scale-Invariant Feature Transform), SURF (Speeded Up Robust Features) and ORB (Oriented FAST and Rotated BRIEF) feature tracking techniques. In order to use satellite images from two different sensors, spatial and radiometric resolution were adjusted during pre-processing steps, and then the feature tracking techniques were applied to the pre-processed images. The matched features extracted from the SIFT showed even distribution across whole image, however the matched features extracted from the SURF showed condensed distribution of features around boundary between ice and ocean, and this regionally biased distribution became more prominent in the matched features extracted from the ORB. The processing time of the feature tracking was decreased in order of SIFT, SURF and ORB techniques. Although number of the matched features from the ORB was decreased as 59.8% compared with the result from the SIFT, the processing time was decreased as 8.7% compared with the result from the SIFT, therefore the ORB technique is more suitable for fast measurement of sea ice motion.