• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.6
• /
• pp.114-122
• /
• 2018

This study presents the emergency assessment method about seismic safety of cable-supported bridges using seismic acceleration sensors installed on the primary structural elements of them. The structural models of bridges are updated iteratively to make their dynamic characteristics to be similar to those of real bridges based on the comparison of their natural frequencies with those of real bridges estimated from acceleration data measured at ordinary times by the seismic acceleration sensor. The displacement at the location of each seismic acceleration sensor is derived by seismic analysis using design earthquake, and the peak value of them is determined as the disaster management criteria in advance. The displacement time history is calculated by the double integration of the acceleration time history which is recorded at each seismic acceleration sensor and filtered by high cut(low pass) and low cut(high pass) filters. Finally, the seismic safety is evaluated by the comparison of the peak value in calculated displacement time history with the disaster management criteria determined in advance. The applicability of proposed methodology is verified by performing the seismic safety assessment of 12 cable-supported bridges using the acceleration data recorded during Gyeongju earthquake.

• Journal of the Korean association of regional geographers
• /
• v.13 no.2
• /
• pp.143-155
• /
• 2007

There are many conflicts or interests among various stakeholders on the development of the coastal area. The integrated methodology, which is reflective of physical conditions, socio-economic circumstances, and people's sense of values, is thus needed to solve the problems. In this study, geographical information systems(GIS) and analytic hierarchy process(AHP) that arc one of multi-criteria analysis methodologies are loosely coupled to develop better analytic procedures for coastal assessment. Socio-economic and environmental parameters of the study area, Hampyung Bay area, are converted to a GIS system-applicable format, while AHP is used to assess the relative importance level of each parameter by calculating weighting factors. After standardizing and rasterizing spatial data from various sources. the weighting factors are applied to produce the layers for each parameter. Map algebra and overlay analyses are used to create the final layer according to the decision making logic or model proposed here. Cell values of that layer could be considered as spatial alternatives. In addition to this finding, the flexibility with the weighing factors enable decision-makers to understand the procedures and alternatives in relevance with selective strategies for coastal management.

• Korean Journal of Optics and Photonics
• /
• v.2 no.3
• /
• pp.139-148
• /
• 1991

A fiber-optic magnetic sensor system for the detection of small ac magnetic field(200Hz-2 kHz) was constructed. Magnetic field sensing part was fabricated by bonding a section of optical fiber to amorphous metallic glass(2605SC) having large magnetostriction effect. And with the directional coupler, all fiber type Mach-Zehnder interferometer was constructed to measure the variation of the external magnetic field by translating it into the optical phase shift in the interferometer. The signal fading problem of the interferometer, which is due to random phase drifts originated from the environment, i.e., temperature fluctuation, vibrations, etc., was elliminated by feedback phase compensation. This allows the sensitivity to be maintained at the maximum by keeping the interferometer in quadrature phase condition. The frequency response of metallic glass was found to be nearly flat in the range of 90 Hz-2 kHz and dc bias field for the maximum ac response was 3.5 Oe. The interferometer output showed good linearity over the range $\pm$0.5 Oe. For 1 kHz ac magnetic field the scale factor S and the minimum detectable magnetic field were measured to be 8.0 rad/Oe and $3X10^{-6} Oe/\sqrt{Hz}$at 1 Hz detection bandwidth respectively.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.9 no.1
• /
• pp.49-55
• /
• 2009

Our domestic economy has been developed very rapidly after 1960's. Also, it is dramatically increasing traffic on road and surround environmental issues. Especially, rapid economic growth has been induced large construction of pavement, and bigger and higher traffic for transportation. These are making air pollution, traffic noise and vibration. The social requirement against the revealed road environment and traffic sound reduction is being demanded. Traffic noise of city zone is showed over the environmental specification more than 57%. In order to overcome these situations, the social attention is being increased. The quiet pavement is the same format of permeable pavement, but is not same for functional performance. In this research, it has been carried out to evaluate the fundamental-mechanical properties of hot mix asphalt for quiet pavement. Especially, couple of laboratory tests are conducted like marshall stability, resilient modulus, indirect tensile test, and compaction energy analysis with gyratory compaction curve. Also, two-layer pavement system has been adopted for developing of quiet pavement. The basic performance of hot mix asphalt of quiet pavement show a satisfaction of specification of hot mix asphalt.

• Resources Recycling
• /
• v.21 no.1
• /
• pp.30-40
• /
• 2012

Electric arc furnace slag is made in ironworks during steel refining, it is been increasing chemical and physical resistibility using ageing method of unstable state of melting steel slag for using concrete's fine aggregates. Which is been changing stable molecular structure of aggregates, it restrains moving of ion and molecule. In Korea, KS F 4571 has been prepared for using the electric arc furnace oxidizing slag to concrete aggregates(EFS). In this study, Electric arc furnace oxidizing slag is used in the PRCC(Polymer Rapid setting Cement Concrete) which is applied a bridge pavement of rehabilitation, largely. The results showed that the increment of compressive strength development by 10- 20%. The flexural strength of EFS-Con increased greatly as the electric arc furnace oxidizing slag changed. The compressive strength and flexural strength developed enough for opening the overlayed EFS-Con to the traffic after 4 hours of EFS-Con placement. The permeability of EFS-Con was evaluated as negligible due to its very low charge passed. Thus, EFS-Con could be used at repairing or overlaying the concrete at fast-track job sites.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.7
• /
• pp.51-62
• /
• 2015

Of recent interests on high capacity DNA storage, DNA watermarking for DNA copyright protection, and DNA steganography for DNA secret communication are augmented, the reversible DNA watermarking is much needed both to embed the watermark without changing the functionality of organism and to perfectly recover the host DNA sequence. In this paper, we address two ways of DE based reversible DNA watermarking using noncoding DNA sequence. The reversible DNA watermarking should consider the string structure of a DNA sequence, the organism functionality, the perfect recovery, and the high embedding capacity. We convert the string sequence of four characters in noncoding region to the decimal coded values and embed the watermark bit into coded values by two ways; DE based multiple bits embedding (DE-MBE) using pairs of neighbor coded values and consecutive DE-MBE (C-DE-MBE). Two ways process the comparison searching to prevent the false start codon that produces false coding region. Experimental results verified that our ways have more high embedding capacity than conventional methods and produce no false start codon and recover perfectly the host sequence without the reference sequence. Especially C-DE-MBE can embed more high two times than DE-MBE.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.30-30
• /
• 2015

유역에 내린 강우의 총량은 홍수나 갈수 측면에서 매우 중요하다. 점 강우량에 의해 측정된 강우량을 이용하여 유역 총강우량으로 환산하는 과정에 많은 오차가 포함되어 있다. 선행연구에 따르면, 우량계를 통한 강우관측에서 언더캐치(undercatch)에 의한 계통오차는 일반적으로 5~16%, 우연오차는 약 5%가 발생된다고 보고하였으며, 점 우량계 자료를 내삽하여 공간자료로 변환할 경우 0.1km 규모에서 표준오차가 4~14%, 1km 규모에서는 33~45%, 10km 규모에서는 약 65% 정도 발생된다고 한다. 이러한 우량계 관측오차 및 강우자료 처리과정에서 발생되는 오차는 유역의 유출량 계산에 영향을 주어 홍수예보 정확도를 크게 떨어뜨릴 수 있다. 우리나라에서는 지금까지 유역 총강우량 산정 측면에서 지점강우량의 불확실성에 대한 연구가 많이 이루어지지 못하였다. 본 연구에서는 우리나라에서 주로 사용되고 있는 전도형 우량계를 이용하여 소규모 구역에서 관측되는 강우관측의 불확실성을 분석하고자 하였다. 연구에 사용된 우량계는 0.5mm 급 표준 전도형 우량계로 정밀도는 시간당 1~100mm 기준으로 ${\pm}1%$를 기록하여 기상검정규격인 ${\pm}3%$를 만족하고 있다. 이 우량계는 한국건설기술연구원 안동하천실험센터 내에 장애물이 없는 평지에 60m 간격으로 총 6대($2{\times}3$)를 설치하여 2014년 7월 11일부터 9월 2일까지 54일간 관측을 수행하였다. 관측기간 동안 2대의 우량계가 수일동안 강우가 기록되지 않아서 분석에서 제외하였다. 우량계 상호 간의 누적강우량(54일간)을 비교한 결과 2.5~25.5mm의 차이를 나타냈다. 강우강도별 강우량 합계를 비교한 결과 시간당 1mm 이상에서는 약 1%의 차이가 났으며, 시간당 15mm 이상에서는 7.4%의 차이를 나타내어 강도가 큰 강우사상에서 우량계 간의 관측오차가 더 크게 나타났다. 또한 우량계 상호 간의 상관계수를 분석한 결과, 우량계 간의 거리가 가까울수록 그리고 누적시간이 길수록 상관계수는 커지는 것을 확인할 수 있었다. 도출된 결과를 토대로 하면 앞서 언급한 바와 같이 점 우량계 자료를 내삽하거나 유역 또는 계산격자의 대푯값으로 사용하여 1시간 이하 단위로 유출모의를 할 경우 심각한 오차를 발생시킬 수 있음을 시사한다. 보다 신뢰성 있는 홍수예보와 효율적인 유역관리를 위해서는 점 중심의 강우 관측이 아닌 면적 우량에 대한 관측이 이루어져야 하며 이를 위한 기술의 개발이 필요하다.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.9
• /
• pp.67-76
• /
• 2010

This paper proposes a image-based water level measurement method, which adapt to the ruler's surface condition. When the surface of a ruler is deteriorated by mud, drifts, or strong light reflection, the proposed method judges the pollution of ruler by comparing distance between two levels: the first one is the end position of horizontal edge region which keeps the pattern of ruler's marking, and the second one is the position where the sharpest drop occurs in the histogram which is construct using image density based on the axis of image height. If the ruler is polluted, the water level is a position of local valley of the section having a maximum difference between the local peak and valley around the second level. If the ruler is not polluted, the water level is detected as the position having horizontal edges more than 30% of histogram's maximum value around the first level. The detected water level is converted to the actual water level by using the mapping table which is construct based on the making of ruler in the image. The proposed method is compared to the ultrasonic based method to evaluate its accuracy and efficiency on the real situation.

• The Korean Journal of Archival Studies
• /
• no.25
• /
• pp.91-129
• /
• 2010

As it grows more heavily reliant on information system, researchers seek for various ways to manage and utilize of dataset records which is accumulated in public information system. It might be needed to adjust date and enhance the quality of public administrative dataset records during transferring to archive system or sharing server. The purpose of this paper is presenting data adjustment and quality enhancement methods for public administrative dataset records, and it refers to ETT procedure and method of construction of datawarehouses. It suggests seven typical examples and processing method of data adjustment and quality enhancement, which are (1) verification of quantity and data domain (2) code conversion for a consistent code value (3) making component with combinded information (4) making a decision of precision of date data (5) standardization of data (6) comment information about code value (7) capturing of metadata. It should be reviewed during dataset record transfer. This paper made Data adjustment and quality enhancement requirements for dataset record transfer, and it could be used as data quality requirement of administrative information system which produces dataset.

• Journal of the Korean Society of Radiology
• /
• v.12 no.6
• /
• pp.793-799
• /
• 2018

As interest in artificial intelligence has increased, artificial intelligence has been actively studied in the medical field. In Korea, artificial intelligence has been applied to medical imaging devices such as X-ray imaging, Computer Tomography and Magnetic Resonance Imaging and artificial intelligence capable of acquiring radiation images of patients without radiologists in the future Medical devices are expected to be invented. This study was an initial study on the automation of patient positioning in X - ray imaging. We used x-ray equipment and human phantoms to evaluate the positioning. The program used Visual Studio 2010 MFC and the image was in the size $1450{\times}1814$. The pixel values were converted to contrasts with values of 0 to 255 that can be visually recognized and output to the monitor. We developed a procedure algorithm program that predicts the angle of the output image through three pixel coordinate values and induces the patient to perform correct positioning according to the voice guidance according to the angle. In the next study, we will study the artificial intelligence to grasp the structure itself and calculate the angle, rather than conveying the reference of coordinates to artificial intelligence. In the future, it is expected that it will be helpful in the study of artificial intelligence from shooting to positioning through the automation of positioning.