• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.2
• /
• pp.123-129
• /
• 2017

This paper proposes a new nonnegative matrix factorization (NMF) based direction-of-arrival (DOA) estimation method for multiple sound sources using a dual microphone array. First of all, sound signals coming from the dual microphone array are segmented into consecutive analysis frames, and a steered-response power phase transform (SRP-PHAT) beamformer is applied to each frame so that stereo signals of each frame are represented in a time-direction domain. The time-direction outputs of SRP-PHAT are stored for a pre-defined number of frames, which is referred to as a time-direction block. Next, In order to estimate DOAs robust to noise, each time-direction block is normalized along the time by using a block subtraction technique. After that, an unsupervised NMF method is applied to the normalized time-direction block in order to cluster the directions of each sound source in a multiple sound source environments. In particular, the activation and basis matrices are used to estimate the number of sound sources and their DOAs, respectively. The DOA estimation performance of the proposed method is evaluated by measuring a mean absolute error (MAE) and the standard deviation of errors between the oracle and estimated DOAs under a three source condition, where the sources are located in [$-35{\circ}$, 5m], [$12{\circ}$, 4m], and [$38{\circ}$, 4.m] from the dual microphone array. It is shown from the experiment that the proposed method could relatively reduce MAE by 56.83%, compared to a conventional SRP-PHAT based DOA estimation method.

• Journal of the Korean Magnetics Society
• /
• v.27 no.1
• /
• pp.1-8
• /
• 2017

Flywheel Energy Storage System (FESS) is composed by flywheel generating rotating potential energy and motor/generator set charging and discharging electric potential energy. The flywheel and motor/generator is connected by rotating shaft. And torque characteristics of motor/generator part can influence charging and mechanical traits of FESS. This paper analyze about motor/generator design method of 5 [kWh] FESS and torque ripple, harmonic effects by change of slots. At First, this paper proposes a method to estimate the flywheel size and the rotor size of the motor from the the rotational kinetic energy by inertia of FESS. The number of induction motor rotor slots for torque ripple reduction in the high speed operation region is selected. This paper performs to reduce the noise and vibration of the flywheel composed of coaxial with motor/generator and flywheel and realize the high efficiency.

• Solar Energy
• /
• v.12 no.2
• /
• pp.62-78
• /
• 1992

The solar cells of $ITO_{(n)}/Si_{(p)}$, which are ITO thin films deposited and heated on Si wafer 190[$^{\circ}C$], were fabricated by two source vaccum deposition method, and their electrical properties were investigated. Its maximum output is obtained when the com- position of the thin film consist of indium oxide 91[mole %] and thin oxide 9[mole %]. The cell characteristics can be improved by annealing but are deteriorated at temperature above 600[$^{\circ}C$] for longer than 15[min]. Also, we investigated the spectral response with short circuit current of the cells and found that the increasing of the annealing caused the peak shifted to the long wavelength region. And by experiment of the X-ray diffraction, it is shown to grow the grains of the thin film with increasment of annealing temperature. The test results from the $ITO_{(n)}/Si_{(p)}$ solar cell are as follows. short circuit current : Isc= 31 $[mW/cm^2]$ open circuit voltage : Voc= 460[mV] fill factor : FF=0.71 conversion efficiency : ${\eta}$=11[%]. under the solar energy illumination of $100[mW/cm^2]$.

• Korean Journal of Remote Sensing
• /
• v.28 no.2
• /
• pp.181-189
• /
• 2012

Recently, interest in potential for estimating water quality using high resolution satellite images is increasing. However, low SNR(Signal to Noise Ratio) over inland water and radiometric errors such as non-linearity of brightness value of high resolution satellite images often lead to accuracy degradation in water quality estimation. Therefore radiometric correction should be carried out to estimate water quality for high resolution satellite images. For KOMPSAT-2 images parameters for brightness value-radiance conversion are not available and precise radiometric correction is difficult. To exploit KOMPSAT-2 images for water quality monitoring, it is necessary to investigate non-linearity of brightness value and noise over inland water. In this paper, we performed brightness value comparison between KOMPSAT-2 images and IKONOS/GeoEye-1, which are known to show the linearity. We used the images obtained over the same area and on the same date for comparison. As a result, we showed that although KOMPSAT-2 images are more noisy;the trend of brightness value and pattern of noise are almost similar to reference images. The results showed that appropriate target area to minimize the impact of noise was $5{\times}5$. Non-linearity of brightness value between KOMPSAT-2 and reference images was not observed. Therefore we could conclude that KOMPSAT-2 may be used for estimation of water quality parameters such as concentration of chlorophyll.

• Journal of Biomedical Engineering Research
• /
• v.19 no.4
• /
• pp.379-384
• /
• 1998

To measure precisely the blood velocity in the skin microcirculation, we have used time domain correlation (called Cross-Correlation) based on the processing of the backscattered RF signal obtained with a wideband echographic imaging transducer, although it is difficulties of adaptation of the pulsed wave system, because of the data processing in real time and the hardware problem. This dedicated technology based on a 20MHz echographic imaging system has been developed. We present how the experimental data, i.e. the backscattered RF signal, have to be analyzed. After RF lines realignment, stationary echo canceling procedure and correlation level control, a velocity profile has been obtained. In-vitro result show that velocity measurements as low as 0.1mm/sec attainable with a 80${\mu}m$ in axial resolution. We have also validated with in-vivo experimentation on the external ear of a rabbit using B-mode sector scanning image and M-mode image of a custom made 20MHz skin image system. The flow of the "auriculares caudales" vein, a microvessel of 600 m diameter, has been detected and studied. This technique will allow a more precise exploration of circulatory troubles in cutaneous pathologies.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.8 no.2
• /
• pp.123-136
• /
• 1996

A three-dimensional Galerkin-FEM model which can handle the temporal and spatial variation of density is presented. The hydrostatic approximation is used and density effects are included by means of conservation equation of heat and the equation of state. The finite difference grids are used in the horizontal plane and a set of linear-shape functions is used for the vertical expansion. The similarity transform is introduced to solve resultant matrix equations. The proposed model was first applied to the density-driven circulation in an idealized basin in the presence of the heat exchange between the air and the sea. The advection terms in the momentum equation were ignored, while the convection terms were retained in the heat equation. Coefficients of the vertical eddy viscosity and diffusivity were fixed to be constant. Calculation in a non-rotating idealized basin shows that the difference in heat capacity with depth gives rise to the horizontal gradient of temperature. Consequently, there is a steady new in the upper layer in the direction of increasing depth with compensatory counter flow .in the lower layer. With Coriolis force, geostrophic flow was predominant due to the balance between the pressure gradient and the Coriolis force. As a test in region of irregular topography, the model is applied to the Yellow Sea. Although the resultant flow was very complex, the character of the flow Showed to be geostrophic on the whole.

• Journal of Broadcast Engineering
• /
• v.13 no.2
• /
• pp.222-235
• /
• 2008

Recently, as growing of high definition media services like HDTV and IPTV, fast moving picture manipulation techniques need to meet what those services require. Especially, a fast reduced-size image extracting method is required in the areas of video indexing and video summary Conventional DC image extracting methods, however, can't be applied to H.264/AVC streams since a spatial domain prediction scheme is adopted in H.264/AVC intra mode. In this paper, we propose a theoretical method for extracting a thumbnail image from an H.264/AVC intra frame in the frequency domain. Furthermore, the proposed scheme can extract the thumbnail very fast since all operations are applied to transform coefficients directly, after a general equation for the thumbnail extraction in nine H.264/AVC intra prediction modes is introduced, an LUT(Look Up Table) for each mode is designed. Through the implementation and performance evaluation, while the subject quality difference between the output of our scheme and a conventional output is negligible, the former can extract the thumbnail faster then the latter by up to 63%.

• Journal of Broadcast Engineering
• /
• v.24 no.6
• /
• pp.948-955
• /
• 2019

As interests in 360-degree VR (Virtual Reality) video services enormously grow, compression and streaming technologies for VR video data have been rapidly developed. Quality Emphasized Region (QER) based streaming scheme has been developed as a kind of viewport-adaptive 360-degree video streaming technology for maintaining immersive experience and reducing bandwidth waste. For selecting a QER corresponding to the user's gaze coordinate, QER-based streaming scheme requires the calculation of Quality Emphasis Center (QEC) distance and signaling message delivery for requesting QER switching. QEC distance calculations require high computational complexity because of repeated calculations as many times as the number of QERs. Furthermore, the signaling message interval results in a trade-off relationship between efficient bandwidth usage and flexible QER switching. In this paper, we propose an improved QER selection algorithm based on MMT protocol to solve this problem. The proposed algorithm could achieve computational complexity reduction by using preprocessed QER_ID_MAP. Also, flexible QER switching could be achieved, as well as efficient bandwidth utilization by an adaptive adjustment of the signaling interval.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.1
• /
• pp.15-31
• /
• 2013

This paper proposes an intermediate image generation method for the viewer's view point by tracking the viewer's face, which is converted to a digital hologram. Its purpose is to increase the viewing angle of a digital hologram, which is gathering higher and higher interest these days. The method assumes that the image information for the leftmost and the rightmost view points within the viewing angle to be controlled are given. It uses a stereo-matching method between the leftmost and the rightmost depth images to obtain the pseudo-disparity increment per depth value. With this increment, the positional informations from both the leftmost view point and the rightmost view point are generated, which are blended to get the information at the wanted intermediate viewpoint. The occurrable dis-occlusion region in this case is defined and a inpainting method is proposed. The results from implementing and experimenting this method showed that the average image qualities of the generated depth and RGB image were 33.83[dB] and 29.5[dB], respectively, and the average execution time was 250[ms] per frame. Also, we propose a prototype system to service digital hologram interactively to the viewer by using the proposed intermediate view generation method. It includes the operations of data acquisition for the leftmost and the rightmost viewpoints, camera calibration and image rectification, intermediate view image generation, computer-generated hologram (CGH) generation, and reconstruction of the hologram image. This system is implemented in the LabView(R) environments, in which CGH generation and hologram image reconstruction are implemented with GPGPUs, while others are implemented in software. The implemented system showed the execution speed to process about 5 frames per second.

• Proceedings of the KSRS Conference
• /
• 2000.04a
• /
• pp.166-171
• /
• 2000

밀티빔 음향 측심기 (Multibeam Echo Sounder)는 탐사선에 수직방향으로 해저면을 주사(Swath)하여, 한번의 송수신(Ping)으로 다중의 빔자료를 얻을 수 있는 측심기로, 해저면에 반사되어 되돌아오는 음파의 음압을 기록하고, 사이드 스캔 소나 자료도 동시에 취득하는 기능을 가지고 있으므로, 측심된 해저 지형(Bathymetry)과 해저 지형을 덮고 있는 해저면의 퇴적 상황(Sediment Environment)도 동시에 얻을 수 있는 다목적 측심기이다. 본 논문에서는 L3사의 Sea Beam 2100 멀티빔 음향 측심기를 통해 얻은 자료를 처리하여, 3차원 공간 데이터인 DEM(Digital Elevation Model)을 생성하고, VRML을 이용한 웹상에서의 해저 지형 가시화를 통해, 세계 어느 곳에서나 웹을 통하여 쉽게 정보를 공유할 수 있는 3차원 해저 지리 정보 시스템의 구현을 목적으로 한다. 멀티빔 음향 측심기를 통해 얻어진 자료는 항해 자료 보정, 음속 보정, 빔 좌표 계산과 분리, 오측심 자료 제거, 조석 보정 등의 단계를 거쳐 측심자료의 정확도 및 신뢰도를 높이는 과정을 거치게 된다. 보정된 멀티빔 음향 측심자료는 무작위 점 사상(Point Topology)으로 산재 되어 있는 빔 자료를 임의의 단위영역으로 변환하는 과정을 거쳐야 하는데, 이 과정을 격자화라고 한다. 자료의 격자화를 통해 3차원 공강 데이터인 DEM 파일을 제작하고, 이 DEM 파일과 음압 영상을 이용해 웹상에서의 3차원 해저 지형의 가시화를 실현한다. 웹상에서의 3차원 지형 가시화에서 방대한 양의 지형 데이터는 데이터 전송 시간과 렌더링 시간에 치명적인 문제이다. 따라서, 렌더링 시간과 데이터 전송 시간을 단축시키기 위한, 지형 자료의 LOD(Level of Detail)를 통해, VRML을 이용한 보다 효과적인 웹상에서의 3차원 해저 지형의 가시화를 실현한다.면 기업은 고객으로 공간적인 제약으로 인한 불신을 불식시키는 신뢰감을 주게 된다. 이러한 고객서비스 향상과 물류비용 절감은 사이버 쇼핑몰이 전국 어디서나 우리의 안방에서 자연스럽게 점할 수 있는 상황을 만들 것이다.SP가 도입되어, 설계업무를 지원하기위한 기본적인 시스템 구조를 구상하게 된다. 이와 함께 IT Model을 구성하게 되는데, 객체지향적 접근 방법으로 Model을 생성하고 UML(Unified Modeling Language)을 Tool로 사용한다. 단계 4)는 Software Engineering 관점으로 접근한다. 이는 최종산물이라고 볼 수 있는 설계업무 지원 시스템을 Design하는 과정으로, 시스템에 사용될 데이터를 Design하는 과정과, 데이터를 기반으로 한 기능을 Design하는 과정으로 나눈다. 이를 통해 생성된 Model에 따라 최종적으로 Coding을 통하여 실제 시스템을 구축하게 된다.the making. program and policy decision making, The objectives of the study are to develop the methodology of modeling the socioeconomic evaluation, and build up the practical socioeconomic evaluation model of the HAN projects including scientific and technological effects. Since the HAN projects consists of 18 subprograms, it is difficult In evaluate all the subprograms simultaneously. Despite, each program is being performed under the category of HAN projects, so the common soci