• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.119-119
• /
• 2023

본 연구에서는 Terra MODIS(MODerate resolution Imaging Spectroradiometer) 위성영상과 토양수분 부족지수(Soil Water Deficit Index, SWDI)를 이용하여 2012년부터 2022년까지 한반도 전국의 1km 공간 증발산량을 산정하였다. 공간 증발산량을 산정하기 위한 과정은 크게 두 가지로 구분된다. 첫 번째로 MODIS의 LST(Land Surface Temperature), NDVI(Normalized Difference Vegetation Index), 선행강우 및 무강우 누적일수를 이용해 1 km 공간 토양수분을 산정하였다. 농촌진흥청 토양수분관측망 자료 중 토지피복, 토양 속성을 고려하여 선정된 70개소 토양수분 실측데이터와 비교한 결과 지점별 평균 R² 0.63~0.90으로 유의미한 상관성을 나타내었다. 산정된 공간 토양수분은 생장저해수분점과 초기위조점의 관계를 이용한 SWDI로 변환하였다. 두 번째로 순 복사량, 기온 및 NDVI의 적은 수문인자를 통해 증발산량 산정이 가능한 MS-PT(Modified Satellite-based Priestley-Taylor) 모형을 기반으로 계절별 식생과 토양수분 상태를 고려하여 1 km 공간 증발산량을 산정하였다. MS-PT 모형에서 가정한 대기 증발 변수 Diurnal temperature (DT)와 지표 수분의 상관성 문제를 해결하기 위해 DT를 SWDI로 적용하였다. 모형 결과의 검증을 위해 국내 플럭스 타워 (설마천, 청미천, 덕유산) 증발산량 관측자료와의 결정계수(Coefficient of determination, R²), RMSE(Root Mean Square Error) 및 IOA(Index of Agreement)를 산정하였다. 본 연구의 결과로 생산되는 국내 증발산량의 시, 공간적 변동성은 증발산량을 통한 수문학적 가뭄지수 및 급성 가뭄을 파악하는데 활용될 수 있을 것으로 판단된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.116-116
• /
• 2023

대규모 댐과 같은 수공구조물의 파괴시 상당한 피해가 발생하므로 구조물설계시 가능최대강수량(PMP) 기준이 적용된다. 포락선 방법은 가장 극심했던 강우량의 포락선을 작성하여 PMP를 산정하는 방법으로 기상 및 강수량자료가 부족시 PMP 추정이 어려운 경우에 사용한다. 포락선의 근사식은 지속시간의 거듭제곱인 멱함수 형태로 나타내며, 우리나라의 경우 1일을 전후로 계수와 차수가 다른 식을 사용한다. 이러한 근사식은 우리나라의 이상홍수 발생빈도 및 규모가 커짐에 따라 검토될 필요성이 있다. 또한, PMP 산정시 활용하는 제한된 수의 지상관측자료는 시공간적 변동성을 완전히 포착할 수 없어 한계가 있다. 본 연구는 이러한 한계를 극복하기 위하여 기상레이더 자료를 기반으로 우리나라 전역의 최대 강우깊이-지속시간 관계를 분석 및 새로운 PMP 포락선을 제시한다. 활용한 레이더는 CMAX(Column Maximum)로 2009~2018년간 10분 단위자료를 수집하였다. 레이더 자료와 비교하기 위하여 지상관측자료 AWS를 함께 수집하였다. AWS는 1997~2022년간 1분 단위자료로 우리나라 전역의 547개 지점관측자료를 활용하였다. 레이더자료는 Z-R 관계식으로 변환하여 가외치(outlier)를 제거 및 보정하였다. 그 후, 정규 크리깅기법으로 생성한 지상관측 강우장과 병합하는 CM(Conditional Merging)기법을 적용하였다. 우리나라 최대 강우깊이-지속시간 관계를 산정한 결과, 기존 포락선의 값이 낮게 산정되었음을 확인하였다. 이는 기후변화 등에 따라 최근 극한 호우가 발생한 것으로 판단된다. 또한, 실제 근사식은 멱함수 거동에서 벗어난 형태로 나타났고, 지점관측자료가 기상레이더 값보다 과소추정되는 경향을 확인하였다. 특히 같은 기간에서 확인하였을 때, 강우지속시간이 짧을수록 AWS값과 레이더자료의 강수량이 2배 정도 차이를 보여 지점관측소가 없는 지역의 국지성 호우 존재를 확인할 수 있었다. 추후, 미래에 더 긴 레이더 시계열을 사용한다면, 더욱 신뢰성 있는 자료로 활용할 수 있을 것으로 판단한다.

• Journal of the Korean Geotechnical Society
• /
• v.39 no.6
• /
• pp.21-30
• /
• 2023

One of the methods for calculating unit skin friction of soft-rock-socket parts for cast-in-place piles involves the roughness measurement of the parts. The measurements are conducted during the excavation stage. A roughness measuring device is installed in the excavation hole and the unit skin friction is calculated from the measured surface roughness of the rock socket. Herein, the results of roughness measurement of rock-socket parts in cast-in-place piles and that of load transfer tests are analyzed and compared. The unit skin friction from the roughness measurements can be converted into unit skin friction corresponding to the displacement of a pile generated in a load transfer test. A reduction factor is given as R_f = -0.14n + 1.48.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.391-391
• /
• 2020

본 연구의 목적은 2006년 6월 ~ 10월에 발생한 메콩강 하류 지역의 홍수를 모의하는 것이다. 강우자료는 위성강우 자료인 미국 NOAA의 CMORPH를 적용하였으며, 홍수유출 해석은 GRM 모델을 적용하였다. Tonlesap 호수를 포함하는 메콩강 하류 지역의 침수분석은 G2D 모델을 적용하였다. 위성강우 자료는 NOAA의 3시간 간격의 CMORPH 위성강우자료를 일일강우량 자료로 변환하고, 일본의 Research Institute for Humanity and Nature (RIHN)과 Meteorological Research Institute of the Japan Meteorological Agency (MRI/JMA)의 APHRODITE 프로젝트에 의해 구축된 APHRODITE 강우량 자료를 이용하여 보정한 후 홍수모의에 적용하였다. DEM 자료는 HydroSHED 15s자료를 이용하였고, 토양도는 UN FAO의 HWSD, 그리고 토양도는 Global map landcover ver3.0을 이용하였다. GRM 모델과 G2D 모델은 Github(https://github.com/floodmodel)에 공개되어 있으며, 이를 이용하였다. 유출 모델은 메콩강 전체 유역을 대상으로 2682.815m의 공간해상도로 구축하였다. 보정한 강우를 이용하여 유출모의 한 결과 첨두유량은 23,796.8 ㎥/sec로 계산되었다. Kratie 지점의 유출량과 Tonlesap 호수로 집수되는 유량을 상류단 경계조건으로 이용하여 약 150일 동안의 침수모의를 하였다. 450 m 공간해상도로 침수모의 도매인을 구축하였으며, 조도계수는 0.045를 사용하였고, 하류단은 자유수면 유출조건을 적용하였다. 침수분석 결과 메콩강 본류를 흐르는 유량이 Tonlesap 호수로 유입되어 호수의 수위가 상승하였다. Tonlesap 호수의 최대침수심은 약 11 m를 나타내었으며, 호수로 유입된 유량은 모의기간 중에 호수에 저류되어 있었다. 메콩강 본류의 Kratie 지점으로 유입되는 유량이 첨두값을 지난 후에도 모의 기간이 길어질수록 메콩강 하류 델타지역과 그 주변의 평지로 침수범위가 확대 되었다. 모의 종료시에는 메콩강 하류가 광범위하게 침수되면서 최대 침수면적을 나타내었다. 본 연구에서 메콩강을 범람한 홍수는 메콩강 하류의 서쪽 해안으로 먼저 유출이 되었다. 이는 침수모의에 적용된 DEM 자료가 북동쪽에서 서남쪽 방향으로 빗살무늬 형태의 고도분포를 가지기 때문인 것으로 판단되며, 대상 지역의 DEM 정확성 평가와 함께 추가적인 연구가 필요하다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.4A
• /
• pp.587-596
• /
• 2006

A half portion of Korean railway bridges depends on the type of steel plate girder bridge. Since these bridges have been built in the early stage of Korean economical boom, numerous maintenance effort suffers from aging and progressive degradation issues at present. In accordance with these efforts, this paper would like to address the detailed analyses of thin steel plates with bolts in order to simulate the connection regions of steel plate girder bridge. The fundamental modal analysis, transient dynamic analysis with 3D piezoelectric element in open circuit loop and signal process with aids of TOF(time of flight) and WC(wavelet coefficient) are extensively discussed.

• Journal of the Korean Society of Radiology
• /
• v.18 no.2
• /
• pp.93-99
• /
• 2024

The digital medical imaging, especially, computed tomography (CT), should necessarily be considered in terms of noise distribution caused by converting to X-ray photon to digital imaging signal. Recently, the denoising technique based on deep learning architecture is increasingly used in the medical imaging field. Here, we evaluated noise reduction effect according to various noise types based on the U-net deep learning model in the lung CT images. The input data for deep learning was generated by applying Gaussian noise, Poisson noise, salt and pepper noise and speckle noise from the ground truth (GT) image. In particular, two types of Gaussian noise input data were applied with standard deviation values of 30 and 50. There are applied hyper-parameters, which were Adam as optimizer function, 100 as epochs, and 0.0001 as learning rate, respectively. To analyze the quantitative values, the mean square error (MSE), the peak signal to noise ratio (PSNR) and coefficient of variation (COV) were calculated. According to the results, it was confirmed that the U-net model was effective for noise reduction all of the set conditions in this study. Especially, it showed the best performance in Gaussian noise.

• Journal of Korean Society of Transportation
• /
• v.34 no.1
• /
• pp.1-14
• /
• 2016

In the recent years, the internet has become accessible without limitation of time and location to anyone with smartphones. It resulted in more convenient travel information access both on the pre-trip and en-route phase. The main objective of this study is to conduct a stationary test for traffic information web/mobile application access indexes from TCS (Toll Collection System); and analyzing the relationship between the web/mobile application access indexes and actual traffic volume on expressways, in order to analyze searching behavior of expressway related travel information. The key findings of this study are as follows: first, the results of ADF-test and PP-test confirm that the web/mobile application access indexes by time periods satisfy stationary conditions even without log or differential transformation. Second, the Pearson correlation test showed that there is a strong and positive correlation between the web/mobile application access indexes and expressway entry and exit traffic volume. In contrast, truck entry traffic volume from TCS has no significant correlation with the web/mobile application access indexes. Third, the time gap relationship between time-series variables (i.e., concurrent, leading and lagging) was analyzed by cross-correlation tests. The results indicated that the mobile application access leads web access, and the number of mobile application execution is concurrent with all web access indexes. Lastly, there was no web/mobile application access indexes leading expressway entry traffic volumes on expressways, and the highest correlation was observed between webpage view/visitor/new visitor/repeat visitor/application execution counts and expressway entry volume with a lag of one hour. It is expected that specific individual travel behavior can be predicted such as route conversion time and ratio if the data are subdivided by time periods and areas and utilizing traffic information users' location.

• Journal of The Korean Association For Science Education
• /
• v.39 no.5
• /
• pp.599-611
• /
• 2019

The purpose of this study is to analyze the systems thinking level of pre-service teachers using rubrics of evaluating systems thinking. For this purpose, systems thinking level model, which can be applied to education or science education, was selected through literature analysis. Eight pre-service teachers' systems thinking were investigated through the systems thinking analysis tool used in domestic research. The systems thinking presented by the pre-service teachers were transformed into the box type causal map using Sibley et al. (2007). Two researchers analyzed the systems thinking using rubrics of evaluating systems thinking. For data analysis, quantitative analysis was performed through correlation analysis using SPSS. In addition, the qualitative analysis of the box type causal map was conducted and the consistency with the quantitative analysis results was verified. The results indicated that the correlation between the 5-Likert systems thinking measurement instrument and the rubrics score was highly correlated with the Pearson product-moment of .762 (p <.05). In the hierarchical correlation of the systems thinking level, the STH model was analyzed with a very high correlation with the Pearson product-moment of .722~.791, and 4-step model was analyzed .381~.730. The qualitative analysis suggested the concept to be included in the low level of system thinking, the higher the level, the less the concept that is presented properly. In conclusion, the level of systems thinking can be derived as a result of research that there is clearly, a hierarchical part. Based on the results of this study, it is necessary to develop a systems thinking level model applicable to science education and develop and validate items that can measure the level of systems thinking.

• Radiation Oncology Journal
• /
• v.20 no.3
• /
• pp.283-293
• /
• 2002

Purpose : A PC based brachytherapy planning system was developed to display dose distributions on simulation images by 2D isodose curve including the dose profiles, dose-volume histogram and 30 dose distributions. Materials and Methods : Brachytherapy dose planning software was developed especially for the Ir-192 source, which had been developed by KAERI as a substitute for the Co-60 source. The dose computation was achieved by searching for a pre-computed dose matrix which was tabulated as a function of radial and axial distance from a source. In the computation process, the effects of the tissue scattering correction factor and anisotropic dose distributions were included. The computed dose distributions were displayed in 2D film image including the profile dose, 3D isodose curves with wire frame forms and dosevolume histogram. Results : The brachytherapy dose plan was initiated by obtaining source positions on the principal plane of the source axis. The dose distributions in tissue were computed on a $200\times200\;(mm^2)$ plane on which the source axis was located at the center of the plane. The point doses along the longitudinal axis of the source were $4.5\~9.0\%$ smaller than those on the radial axis of the plane, due to the anisotropy created by the cylindrical shape of the source. When compared to manual calculation, the point doses showed $1\~5\%$ discrepancies from the benchmarking plan. The 2D dose distributions of different planes were matched to the same administered isodose level in order to analyze the shape of the optimized dose level. The accumulated dose-volume histogram, displayed as a function of the percentage volume of administered minimum dose level, was used to guide the volume analysis. Conclusion : This study evaluated the developed computerized dose planning system of brachytherapy. The dose distribution was displayed on the coronal, sagittal and axial planes with the dose histogram. The accumulated DVH and 3D dose distributions provided by the developed system may be useful tools for dose analysis in comparison with orthogonal dose planning.

• Analytical Science and Technology
• /
• v.25 no.2
• /
• pp.121-126
• /
• 2012

It is essential to evaluate the quality of Hanji record paper without damaging the record paper by previous destructive methods. The samples were Hanji record paper produced in the 1900s. Near-infrared (NIR) spectrometer was used as a non destructive method for evaluating the quality of record papers. Fourier transform (FT) spectrometer was used with 12,500 to 4,000 $cm^{-1}$ wavenumber range for quantitative analysis and it has high accuracy and good signal-to-noise ratio. The acidity and moisture content of Hanji record paper were measured by integrating sphere as diffuse reflectance type. The acidity (pH) of chemical factors as a quality evaluated factor of Hanji was correlated to NIR spectrum. The NIR spectrum was pretreated to obtain the coefficients of optimum correlation. Multiplicative scatter correction (MSC) and First derivative of Savitzky-Golay were used as pretreated methods. The coefficients of optimum correlation were calculated by PLSR (partial least square regression). The correlation coefficients ($R^2$) of acidity had 0.92 on NIR spectra without pretreatment. Also the standard error of prediction (SEP) of pH was 0.24. And then the NIR spectra with pretreatment would have better correlation coefficient ($R^2$ = 0.98) and 0.19 as SEP on pH. For moisture contents, the linearity correlation without pretreatment was higher than the case with pretreatment (MSC, $1^{st}$ derivative). As the best result, the $R^2$ was 0.99 and SEP was 0.45. This indicates that it is highly proper to evaluate the quality of Hanji record papers speedily with integrated sphere and FT NIR analyzer as a non-destructive method.