• 제목/요약/키워드: 변형 바퀴

검색결과 30건 처리시간 0.031초

험지 주행용 소형 로봇을 위한 바퀴의 설계 (A New Wheel Design for Miniaturized Terrain Adaptive Robot)

  • 김유석;김한;정광필;김성한;조규진;주종남
    • 한국정밀공학회지
    • /
    • 제30권1호
    • /
    • pp.32-38
    • /
    • 2013
  • Small mobile robots which use round wheels are suitable for driving on a flat surface, but it cannot climb the obstacle whose height is greater than the radius of wheels. As an alternative, legged-wheels have been proposed by many researchers due to its better climbing performance. However, driving and climbing performances have a trade-off relationship so that their driving performance should be sacrificed. In this study, in order to achieve both driving and climbing performances, a new transformable wheel was developed. The developed transformable wheel can have a round shape on a flat surface and change its shape into legged-wheel when it makes a contact with an obstacle. For design of the transformable wheel, the performance of legged-wheel was analyzed with respect to the number and curvature of the leg, and then the new transformable wheel was designed based on the analysis. Contrary to the existing transformable wheels that contain additional actuators for the transformation, the developed transformable wheel can be unfolded without any additional actuator. In this study, in order to validate the transformable wheel, a simple robot platform was fabricated. Consequently, it climbed the obstacle whose height is 2.6 times greater than the wheel radius.

차량의 이동하중과 하중형태가 연성 포장의 거동 특성에 미치는 영향 평가 (Effects of Moving Dynamic Vehicle Loads on Flexible Pavement Response)

  • 조명환;김낙석;남영오;임종혁
    • 한국방재학회 논문집
    • /
    • 제8권1호
    • /
    • pp.39-45
    • /
    • 2008
  • 일반적으로 아스팔트 콘크리트 포장의 수치해석은 순간적으로 최대 하중이 재하 되는 크리프 컴플라이언스(creep compliance) 개념을 가지고 수행되지만 실제 차량의 하중은 시간에 따라 크기가 변화하게 된다. 따라서 본 연구에서 차량의 이동 속도를 변화(25km/hr, 50km/hr, 80km/hr)시키며 현장의 포장 거동을 측정하고, 비선형 접지압력과 차량의 이동속도를 고려한 3차원 유한요소해석으로부터 얻어진 포장의 예측 거동을 비교 분석하였다. 현장거동에서 차량의 중간바퀴와 뒷바퀴에서 발생하는 횡방향 변형률과 종방향 변형률이 아스팔트 콘크리트 기층 하부에서 약 40%정도 차이가 나는 것으로 나타났으며 예측거동에서도 유사한 경향을 보여주었다. 그러나 예측거동의 경우 재료의 점탄성을 고려하지 못하고, 실제 하중의 이동을 완벽하게 고려하지 못했기 때문에 임계지점으로 차량이 접근하는 경우와 접근후에 대해서 정확한 설명이 힘든 것으로 나타났다.

6축 휠 동력계의 구조설계 및 평가 (Structural Design and Evaluation of Six-component Wheel Dynamometer)

  • 김만기;주진원
    • 대한기계학회논문집A
    • /
    • 제40권1호
    • /
    • pp.53-63
    • /
    • 2016
  • 자동차 주행 중 도로면으로부터 차량 바퀴에 전달되는 동하중을 측정하기 위해 휠 동력계가 사용된다. 본 논문에서는 전단 변형과 굽힘 변형을 이용한 두 가지 타입의 6축 휠 동력계를 설계하고 비교 평가하였다. 유한요소해석을 이용하여 휠 동력계 기본 구조에 대한 전단 변형 거동과 굽힘 변형 거동을 분석하였으며 이로부터 전단형 휠 동력계와 굽힘형 휠 동력계를 설계하였다. 변형률 해석을 반복 수행하여 각 하중에 대한 출력변형률이 미리 결정된 비슷한 값이 되도록 하고 상호간섭 변형률이 최소화 되도록 설계를 수정하고 브리지 회로를 구성하였다. 전단형 휠 동력계는 균일한 변형률 분포를 얻을 수 있어 제작시 안정된 특성치를 얻을 수 있는 반면에, 굽힘형 휠 동력계는 각 하중에 대한 출력 변형률 값이 더 일정하여 균일한 감도의 좋은 성능을 얻을 수 있을 것으로 예측된다.

유연 기판상 ITO 박막의 롤링변형에 따른 신뢰성 연구 (Reliability study on rolling deformation of ITO thin film on flexible substrate)

  • 설재근;이동준;김태욱;김병준
    • 마이크로전자및패키징학회지
    • /
    • 제25권1호
    • /
    • pp.29-33
    • /
    • 2018
  • 미래의 전자 기기는 접고 굽히고 둘둘 마는 등 다양한 변형에도 전기적 안정성을 가지는 기기들로 발전할 것이며, 반복 기계적 변형 하에서 유연 전자 소자의 전기적 신뢰성 확보가 중요한 이슈로 부각되고 있다. 본 연구에서는 반복 롤링 변형이 가능한 장치를 개발하고 이를 이용해, 현재 유연 전자 소자용 투명 전극 소재로 가장 널리 사용 중인 ITO 박막의 반복 롤링 실험 중 전기적 특성 변화를 연구하였다. 전극과 기판의 상대적 위치에 의해 인장 응력과 압축 응력이 가해지므로, Outer rolling 및 Inner rolling의 두 조건에서 실험을 진행하여 응력 상태에 따른 전기적 신뢰성 차이를 연구하였다. 그 결과, inner rolling의 경우 outer rolling에 비해 더 우수한 전기적 안정성을 나타냈으며, 이는 inner bending에 의한 압축 응력 상태의 경우 crack closing 변형에 따라 전기저항이 상대적으로 낮게 증가하는 것으로 해석된다. 또한, 롤링 바퀴 수에 따른 피로 저항성을 실시간 전기저항 측정을 통해 연구하였으며, 그 결과, 롤링 바퀴 수가 증가할수록 피로 파괴 영역이 증가하므로 전기저항이 더욱 크게 증가하는 것으로 나타났다. 본 연구를 통해 롤링 조건에서 유연 전극의 신뢰성에 대해 이해하고, 이는 향후 유연 전자소자용 고신뢰성 전극 개발에 활용 될 수 있을 것으로 기대한다.

복합 재료와 형상 기억 합금 코일 스프링 구동기를 이용한 유연하게 변형 가능한 바퀴 로봇의 설계 및 제작 (Design and Fabrication of Soft Deformable Wheel Robot using Composite Materials and Shape Memory Alloy Coil Spring Actuators)

  • 고제성;이대영;김지석;김승원;조규진
    • 한국정밀공학회지
    • /
    • 제30권1호
    • /
    • pp.47-52
    • /
    • 2013
  • In order to operate a search and rescue robot in hazardous area, the robot requires high mobility and adaptable locomotion for moving in unpredictable environments. In this paper, we propose the deformable soft wheel robot that can produce three kinds of driving modes; caterpillar driving mode, normal wheel driving mode, legged-wheel driving mode. The robot changes its driving mode as it faces the various obstacles such as a small gap, stairs etc. Soft film and composite materials are used for fabrication of deformable wheel structure and Shape Memory Alloy (SMA) coil spring actuators are attached on the structure as an artificial muscle. Film lamination and an composite manufacturing process is introduced and the robot design is required to be modified and compromised to applying the manufacturing process. The prototype is developed and tested for verifying feasibility of the deformable wheel locomotion.

복잡한 지형에 유연하게 적응할 수 있는 변형 가능한 6족 로봇의 구현 (Implementation of a Transformable Hexapod Robot for the Complex Terrain)

  • 이상훈;김진걸
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2006년도 제37회 하계학술대회 논문집 D
    • /
    • pp.1969-1970
    • /
    • 2006
  • 본 연구는, 장애물과 지형에 순응할 수 있는 새로운 형태의 변형 가능한 로봇을 제안하고자 한다. 사람이 활동하는 영역에서 로봇을 사용할 때, 항상 로봇의 이동에 적합한 환경을 제공해 줄 수는 없다. 따라서 로봇 자체가 환경을 인식하고 그에 맞게 동작할 수 있어야 한다. 로봇은 바퀴구동을 통한 평탄한 지형에서의 빠른 이동성과 보행을 통한 평탄하지 않은 지형에서의 이동성의 장점들을 동시에 지닐 수 있는 구조로 설계되었다. 스테레오 영상 시스템과 거리감지 센서모듈을 통해 로봇의 안정적이고 효과적인 동작을 구현하고자 한다. 본 논문에 대해서는 실험을 통해 이를 검증한다.

  • PDF

자율이동 로봇의 위치추정을 위한 변형된 칼만필터 방식 (Modified Kalman Filter Method for the Position Estimation of an Autonomous Mobile Robot)

  • 엄기환;강성호;김주웅
    • 한국정보통신학회논문지
    • /
    • 제12권4호
    • /
    • pp.781-790
    • /
    • 2008
  • 본 논문에서는 칼만 필터 위치 추정 방식에서 노이즈 공분산에 의해 발산이 되는 문제점을 개선하기 위해 바퀴로 구성된 자율이동 로봇에 노이즈를 고려한 위치추정 방식을 제안하였다. 제안한 방식은 신경회로망을 이용한 변형된 칼만 필터 설계 방식으로, 신경회로망을 이용하여 시스템 노이즈와 측정노이즈의 공분산을 추정함으로서 발산을 방지하는 것이다. 제안한 방식의 유용성을 자체 제작한 자율이동 로봇을 대상으로 시뮬레이션 및 실험을 통하여 칼만 필터 위치 추정 방식 보다 우수함을 확인하였다.

비틀림 하중을 받는 고주파열처리 드라이브 차축의 피로수명 평가 (Fatigue Life Estimation of Induction-Hardened Drive Shaft Under Twisting Loads)

  • 김태영;김태안;한승호
    • 대한기계학회논문집A
    • /
    • 제41권6호
    • /
    • pp.567-573
    • /
    • 2017
  • 자동차 부품 중 드라이브 샤프트는 엔진에서 발생하는 토크를 바퀴에 전달하는 동력 전달장치의 핵심 부품이다. 엔진에서 입력되는 비틀림 하중과 주행 중 발생하는 실동하중에 의한 부품의 파손을 방지하기 위해, 고주파 열처리로 강도 및 피로수명이 개선되고 있다. 본 연구에서는 고주파 열처리에 따른 드라이브 샤프트의 피로수명을 정량적으로 평가할 수 있는 피로수명 평가기법을 구축하였다. 드라이브 샤프트의 소재인 SAE10B38M2 강재로 모재 및 경화깊이가 서로 다른 고주파 열처리 시편 두 종을 제작하여 비틀림 하중 하에서의 전단 변형률 제어 피로시험을 진행하였고, 변형률-수명 피로수명 평가에 필요한 피로 물성값을 구하였다. 얻어진 피로 물성값을 이용하여 드라이브 샤프트의 변형률 기반 피로해석을 진행하였으며, 얻어진 피로수명 결과를 시제품 피로시험 결과와 비교하여 해석기법의 타당성을 검증하였다.

연속 가변식 반능동형 현가시스템의 승차감 및 주행안전성 제어기 설계 해석 (Design Analysis of Ride Comfort- and Driving Safety-control Strategies for the Continuously Controlled Semi-active Suspension Systems)

  • 허승진;황성호;박기홍
    • 한국소음진동공학회논문집
    • /
    • 제14권1호
    • /
    • pp.17-23
    • /
    • 2004
  • The semi-active suspension system is getting widely adopted in passenger vehicles for its ability to improve ride comfort over the passive suspension system while not degrading driving safety. A key to the success is to develop practical controllers that yield performance enhancement over the passive damper under various driving conditions. To this end, several control strategies have been studied and evaluated in this research in consideration of practical aspects such as nonlinearity and dynamics of the damper. From simulation results. it has been observed that, with the proposed control schemes, ride comfort can be significantly upgraded while suppressing degradation of driving safety.

스테레오 영상처리를 이용한 바퀴달린 6족 로봇의 형태변형 알고리즘 구현 (Implementation of Transformation Algorithm for a Leg-wheel Hexapod Robot Using Stereo Vision)

  • 이상훈;김진걸
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2006년 학술대회 논문집 정보 및 제어부문
    • /
    • pp.202-204
    • /
    • 2006
  • In this paper, the detection scheme of the spatial coordinates based on stereo camera for a Transformation algorithm of an Leg-wheel Hexapod Robot is proposed. Robot designed as can have advantages that do transfer possibility fast mobility in flat topography and uneven topography through walk that use wheel drive. In the proposed system, using the disparity data obtained from the left and right images captured by the stereo camera system and the perspective transformation between a 3-D scene and an image plane, depth information can be detected. Robot uses construed environmental data and transformation algorithm, decide wheel drive and leg waik, and can calculate width of street and regulate width of robot.

  • PDF