• Magazine of the Korean Society of Agricultural Engineers
• /
• v.26 no.1
• /
• pp.38-51
• /
• 1984

Mononobe-Okabe에 의해서 옹벽에 대한 동적 토압계산법이 개발된 이래 본론두중 옹벽의 과동에 의한 변위에 대해서는 많은 연구가 이루어졌으나 Mononobe-Okabe식이 원래 옹벽 자체의 관성을 고려치 아니하였고 또 동적 하중의 작용점을 제시하지 않으므로서 전도모멘트를 계산할 수 없게 하므로서 옹벽의 전도에 의한 변위에 대해서는 연구가 되지 아니하였다. 본 연구의 목적은 해석적 방법과 모형실험을 통해서 지진 및 폭파 등의 동적 하중에 의한 옹벽의 전도에 의한 변위를 고찰하고자 하는 바 그 결과를 요약하면 다음과 같다. 1. 활동에 대한 항복가속도가 있는 것과 마찬가지로 전도에 대한 항복가속도가 있다. 이 항복가속도는 옹벽의 안전율이 증가함에 따라 증가한다. 2. 이론치와 실험치는 경향으로 보아 일치한다. 실험치가 이론치보다 작은 것은 모형실험에서 옹벽측면과 컨테이너 사이의 마찰에 기인한 것으로 보아지며 마찰을 줄임으로써 이론치에 더 접근시킬 수 있을 것이다. 3. 옹벽의 회전각도의 크기는 지반가속도가 클수록, 옹벽저면이 작을수록 그리고 흙의 내부마찰각이 작을수록 크게 증가한다. 4. 실용적인 규격의 옹벽의 변위는 활동에 의한 것보다 전도에 의한 것이 훨씬 크며 전체 변위의 대부분을 차지한다. 5. 옹벽 상단의 횡적 변위는 옹벽 설계를 결정짓는 중요한 요소가 될 수 있다.

• Journal of the Korean Geotechnical Society
• /
• v.17 no.4
• /
• pp.269-278
• /
• 2001

국내 30개의 교대측방이동 사례현장에 대하여 교대기초말뚝의 사면안정효과와 교대의 실측측방변위를 고려한 사면안정해석을 실시하였다. 해석결과 사면안전율은 말뚝의 효과를 무시한 경우 1.5이상, 말뚤의 효과를 고려한 경우 1.8이상 되어야 안전함을 알 수 있다. 그리고, 교대의 실측측방변위와 사면안전율과의 상관관계로부터 교대의 허용측방변위 설계기준은 5cm보다 1.5cm로 함이 더 합리적임을 알 수 있다. 사면안정해석결과와 교대의 실측측방변위를 토대로 기존에 제안된 교대측방이동 판정기준의 국내 적용여부를 검토한다. 이를 위하여 교대의 사면안정해석결과 및 실측측방변위와 교대측방이동 관련지수와의 상관관계를 조사한다. 그 결과 실측된 교대의 측방변위와 이를 고려한 사면안전율은 교대의 측방유동지수, 측방이동판정지수 및 지반의 안정계수와 무관한 경우도 많이 존재하는 것으로 나타났다. 이는 결국 이들 경험적인 지수만으로 교대측방이동을 판정하는 것은 불충분함을 의미한다. 따라서, 교대측방이동을 판정할 경우에는 반드시 교대의 측방변위를 고려한 사면안정해석이 실시되어야 한다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.18 no.4
• /
• pp.369-378
• /
• 2000

The objective of this study is to measures deformation of the structures for stability checks by GPS survey. In this study, 2 points on south side dike of Keum River were measured by 4 sets of GPS(SR9500, Leica) every 4 months for a year, and 3-dimensional displacements of the points were acquired. In order to seek more reliable deformation measurement methods for the offshore structure by GPS, the accuracy of GPS survey with various control points configuration and checking system for detecting unrealistic measurements are also discussed.

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 2000.09a
• /
• pp.84-87
• /
• 2000

최근 들어 구조물이 대형화되고 급속히 시공되는 경향이 증가함에 따라 구조물에 대한 변위측정은 시공중인 구조물뿐만 아니라, 그 사후관리 및 안전성 여부를 파악하는데 중요한 기초자료로 활용되고 있다. 특히, 해상에서 실시되는 방조제나 안벽 공사 등에서는 육상구조물에 비해 변위측정에 여러 가지 제약이 따른다. 이와 같은 해상 토목구조물의 거동을 다각적으로 파악하기 위한 연직 방향 및 평면 변위 측정에 GPS를 적용하면 신속하고 정확한 변위측정 자료를 획득할수 있다. (중략)

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.10 no.4
• /
• pp.337-347
• /
• 2008

Critical strain is a new material property of the ground. Critical strain concept which was established in tunnel engineering can be applied to deformation limits in the ground due to tunneling by using the measured displacement at the tunnel construction site. In this study, quantitative evaluations for the tunnel stability are conducted by analysing the displacement results obtained at the construction field. Especially, critical stain concept was reviewed from a total displacement point of view using the displacements occurring before excavation. As a results, the variation characteristics of the tunnel stability are presented on the critical strain diagram with or without the preceeding displacements.

• Geotechnical Engineering
• /
• v.1 no.1
• /
• pp.21-30
• /
• 1985

The reasonable static and dynamic earth pressure equations were developed by applying the Dubrova's theory and Chang's method to the following cases of wall movements; (1) Active case rotating about the top (2) Active case rotating about the bottom (3) Passive case rotating about the top (4) Passive case rotating about the bottom The equations are presented in accordance with particular wall displacements for the sand and cohesive back-fill, respectively. The results computed by the proposed equations are compared with the conventional theoretical values.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.6 no.1
• /
• pp.35-41
• /
• 1988

In the three dimensional deformation analysis by terrestrial photographs, iterative reweighted similarity transformation method is used for more accurate displacement computation. Also, Bayesian Inference method is used in the detection of unstable points and the analytical method for displacement patterns analysis is proposed in this study. In results, the accuracy of displacement estimation was improved by applying the weights of least absolute method ($\Sigma$｜d｜⇒min) and more accurate detection of displaced points could be achieved by Bayesian Inference. The analytical method in the patterns of displacement proposed in this study could be adapted to the movement analysis of objects wholly or partly.

• Journal of the Society of Disaster Information
• /
• v.13 no.3
• /
• pp.286-295
• /
• 2017

In this study, it is compared various coefficients of subgrade reaction for application of numerical analysis based on measured data by using various theories and empirical formula. The ratio of the maximum and minimum value is 6.80 at the top of wall but it is 1.06 at the maximum displacement point depends on change of calculated coefficient of subgrade reaction. The data of displacement were generally similar considering an increment of a coefficient of subgrade reaction. And the results of comparison of the displacement at the maximum displacement point by numerical analysis and measured data show similar displacement shape.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.25 no.5
• /
• pp.350-355
• /
• 2005

The probes of fiber optic OTDR (Optical Time Domain Reflectometry) sensor was developed to measure displacements of social infrastructures. This probe was simply constructed with two conventional optical fiber connectors, and a fiber bending part, which transforms displacement to optical loss. When the displacement was affected on the bending loss part, the reflected light intensity of one optical connector was changed. The displacement was determined from this reflected light intensity change of the connector. fiber optic OTDR displacement sensor was developed as the multiplexed type of one fiber line with 5 sensor probes. Multiplexing operation was tested by these 5 sensor probes.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.17 no.1
• /
• pp.49-58
• /
• 2004

Drift design of a high-rise building is a governing factor in the determination of structural weights and lateral resisting systems. However, high-rise buildings are composed of tens of thousands of structural member, designer can not know which members are active to lateral drift control and how much they contribute to lateral drifts. Resizing technique was proved to be a practical method for drift design of high-rise buildings. However, no resizing algorithm has been considered the effect of vertical loads in drift designs. Thus, in this paper, a resizing algorithm has been developed for drift designs of high-rise buildings subjected to both lateral and vertical loads. The drift design model has been applied to drift designs of two high-rise building examples.