• Korean Chemical Engineering Research
• /
• v.56 no.4
• /
• pp.479-495
• /
• 2018

This study was carried out to research the multimedia fate modeling, concentration distribution and impact assessment of polycyclic aromatic hydrocarbons (PAHs) emitted from automobiles, which are known as carcinogenic and mutation chemicals. The amount of emissions of PAHs was determined based on the census data of automobiles at a target S-city and emission factors of PAHs, where multimedia fugacity modeling was conducted by the restriction of PAHs transfer between air-soil at the impervious area. PAHs' Concentrations and their distributions at several environmental media were predicted by multimedia fugacity model (level III). The residual amounts and the distributions of PAHs through mass transfer of PAHs between environment media were used to assess the health risk of PAHs at unsteady state (level IV), where the sensitivity analyses of the model parameter of each variable were conducted based on Monte Carlo simulation. The experimental result at S-city showed that Fluoranthene among PAHs substances are the highest residual concentrations (60%, 53%, 32% and 34%) at all mediums (atmospheric, water, soil, sediment), respectively, where most of the PAHs were highly accumulated in the sediment media (more than 80%). A result of PAHs concentration changes in S-city over the past 34 years identified that PAHs emissions from all environmental media increased from 1983 to 2005 and decreased until 2016, where the emission of heavy-duty vehicle including truck revealed the largest contribution to the automotive emissions of PAHs at all environment media. The PAHs concentrations in soil and water for the last 34 years showed the less value than the legal standards of PAHs, but the PAHs in air exceeded the air quality standards from 1996 to 2016. The result of this study is expected to contribute the effective management and monitoring of toxic chemicals of PAHs at various environment media of Metropolitan city.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.4
• /
• pp.599-604
• /
• 1998

We have investigated Pt and $RuO_2$ as a bottom electrode for ferroelectric capacitor applications. The bottom electrodes were prepared by using an RF magnetron sputtering method. Some of the investigated parameters were a substrate temperature, gas flow rate, RF power for the film growth, and post annealing effect. The substrate temperature strongly influenced the surface morphology and resistivity of the bottom electrodes as well as the film crystallographic structure. XRD results on Pt films showed a mixed phase of (111) and (200) peak for the substrate temperature ranged from RT to $200^{\circ}C$, and a preferred (111) orientation for $300^{\circ}C$. From the XRD and AFM results, we recommend the substrate temperature of $300^{\circ}C$ and RF power 80W for the Pt bottom electrode growth. With the variation of an oxygen partial pressure from 0 to 50%, we learned that only Ru metal was grown with 0~5% of $O_2$ gas, mixed phase of Ru and $RuO_2$ for $O_ 2$ partial pressure between 10~40%, and a pure $RuO_2$ phase with $O_2$ partial pressure of 50%. This result indicates that a double layer of $RuO_2/Ru$ can be grown in a process with the modulation of gas flow rate. Double layer structure is expected to reduce the fatigue problem while keeping a low electrical resistivity. As post anneal temperature was increased from RT to $700^{\circ}C$, the resistivity of Pt and $RuO_2$ was decreased linearly. This paper presents the optimized process conditions of the bottom electrodes for memory device applications.

• The korean journal of orthodontics
• /
• v.28 no.1 s.66
• /
• pp.1-15
• /
• 1998

Adult wound healing is accompanied with inflammation and eventual scar formation, whereas fetal wounds heal rapidly by mesenchymal proliferation without significant inflammatory cell participation and with minimal or no scar formation. The cellular mechanisms underlying these differing forms of wound healing are unknown but the extracellualr matrix through its effects on cell function, may play a key role. Therefore the purpose of this study is to investigate the spatial and temporal deposition of several component of extracellular matrix, which are known to be involved with scar formation, in the artificially created cleft lip wound healing of fetuses. The author had undergone hysterotomy and created cleft lip-like defects on fetuses of New Zealand White Rabbit in mid-third trimester(24 days). Fetuses were divided into the repaired group, the unrepaired group and the sham-operated control group. At 1, 2, 3, 5, 7 days after procedure, fetuses were obtained by Caeserem section. After documenting the viability of fetuses, they were photographed to compare size and facial morphology and sectioned for histological examination by H & E stain and spatial and temporal deposition of collagen typeI, III, IV, V and fibronectit laminin by immunohistochemical method. The findings are summarized as follows 1. There were lack of inflammation in the repaired and the unrepaired group during experimental periods. 2. The reepithelialization of the unrepaired group was slower than that of the repaired group. 3. Collagen I, III, V were found from post-op. third day. There were no difference of distribution in the control, the repaired and the unrepaired group. Collagen types I, III, V were present in all groups with restoration of the normal collagen pattern in the fetus. This implies that lack of scarring in fetal wounds is due to the difference of collagen organization pattern within wound and not simply lack of collagen formation. 4. Collagen IV was slightly increased at post-op. third day and decreased after post-op. fifth day. Eventually there were no differences in the control, the repaired and the unrepaired group. Lminin was found at post-op. fifth day and maintained staining density until post-op. seventh day. There were no differences in the control, the repaired and the unrepaired group. According to staining of laminin and collagen type IV in epithelial basement membrane, formation of epithelial basement membrane was not completed until reepithelialization was finished. 5. According to staining of laminin and collagen type IV, there were no increase of neovascularity in the repaired and the unrepaired group. 6. Fibronectin was increased until post-op. third day at fibrin clot, wound base and margin and decreased after post-op. fifth day. Eventually, there were no differences in the control, the repaired and the unrepaired group. So it implies fibronectin plays a role as provisional matrix for fetal wound healing.

• Journal of fish pathology
• /
• v.24 no.1
• /
• pp.29-37
• /
• 2011

Effects of temperature ($13{\pm}1.5^{\circ}C$, $23{\pm}1.5^{\circ}C$) on the pharmacokinetic properties of nalidixic acid (NA) and piromidic acid (PA) were studied after oral administration to cultured black rockfish, Sebastes schlegeli. Serum concentrations of NA and PA were determined using HPLC-UV detector after a single dosage of 60 mg/kg body weight. At $23{\pm}1.5^{\circ}C$, the peak serum concentrations of NA and PA, which attained at 24 h post-dose, were 5.87 and $0.43\;{\mu}g/ml$, respectively. At $13{\pm}1.5^{\circ}C$, the peak serum concentrations of NA and PA, which attained at 10 h post-dose, were 6.22 and $1.57\;{\mu}g/ml$, respectively. Better absorption of PA was noted at $13{\pm}1.5^{\circ}C$ compared to $23{\pm}1.5^{\circ}C$. However, absorption of NA was not affected significantly by temperature. The elimination of NA and PA from serum of black rockfish was considerably faster at $23{\pm}1.5^{\circ}C$ than at $13{\pm}1.5^{\circ}C$. The kinetic profile of absorption, distribution and elimination of NA and PA in serum were analyzed by fitting to a one compartment model, with WinNonlin program. The AUC, $T_{1/2}$, $T_{max}$ and $C_{max}$, respectively, were: $161.25\;{\mu}g{\cdot}h/ml$, 0.15 h, 12.29 h and $8.91\;{\mu}g/ml$ at $23{\pm}1.5^{\circ}C$, and $134.12{\mu}g{\cdot}h/ml$, 0.18 h, 8.79 h and $5.00\;{\mu}g/ml$ at $13{\pm}1.5^{\circ}C$ with NA; $41.57\;{\mu}g{\cdot}h/ml$, 0.58 h, 8.24 h and $0.21\;{\mu}g/ml$ at $23{\pm}1.5^{\circ}C$, and $40.36\;{\mu}g{\cdot}h/ml$, 0.59 h, 5.04 h and $1.20\;{\mu}g/ml$ at $13{\pm}1.5^{\circ}C$ with PA.

• Korean Journal of Food Science and Technology
• /
• v.39 no.5
• /
• pp.588-592
• /
• 2007

In this study, we evaluated the recovery effects of dietary fiber extracted from soybean hulls on diarrhea in rats. Diarrhea-induced Sprague-Dawley male rats were divided randomly into 4 groups and fed experimental diets for 24 hours. The diets, based on the AIN93G diet, were as follows: CON (control diet), S-COTL (67.2 g/kg soybean cotyledon fiber diet), S-HULL (59.6g/kg soybean hull fiber diet), CHI (55.6g/kg chicory fiber diet). The results showed significant (10-20%) reductions of fecal water content in the CON and S-HULL groups, as compared to the S-COTL and CHI groups. The change in serum osmolality, a measure of dehydration symptoms, was significantly reduced in CON and S-HULL as compared to the S-COTL and CHI groups. Based on the results, it is suggested that soybean hull fiber functions well for diarrhea recovery in rats. Consequently, soybean hull fiber is an important food source that could be used as a medical food in patients suffering from diarrhea.

• Journal of the Mineralogical Society of Korea
• /
• v.7 no.1
• /
• pp.25-39
• /
• 1994

The Deogbong napseok clay deposit which is composed mainly of dickite and pyrophyllite has been formed by hydrothermal alteration of the Late Cretaceous volcanic rocks consisting of andesitic tuff and andesite. The mineralogy of the napseok ores and the hydrothermal alteration processes have been studied in order to know the nature of the interaction between minerals and fluids for the formation of the deposit. Chemical distribution shows that alkali elements and silica were mobile but alumina was relatively immobile during the hydrothermal processes. It is evident that enrichment of alumina and leaching of silica from the host rock led to the formation of the napseok ore, whereas the enrichment of silica in the outer zone of the deposit gave rise to the silica zone. A large amount of microcrystalline quartz closely associated with dickite and pyrophyllite suggests the increasing activity of silica. Thus Si which was released away from the argillic zone by the increasing activity of silica. Thus Si which was released away from the argillic zone by the increasing activity of silica solubility moved out precipitating in the margin of the deposit to form the silica zone. Variation in dickite crystallinity implies the local change in the stability of the system. Thermodynamic calculation shows that the invariant point of pyrophyllite-dickite (kaolinite)-diaspore-quartz assemblages at 500 bars in the system $Al_{2}O_{3}-SiO_{2}-H_{2}O$ is about 300 $^{\circ}C$. Based on the mineral assemblages and the experimental data reported, it is estimated that the main episode of hydrothermal alteration occurred at least above 270 to 300 $^{\circ}C$ and $X_{CO_2}$ <0.025. Mineral occurrence and chemical variation indicate that the activity of Al is high in the upper part of the deposit, whereas the activity of Si is high in the lower part and the margin of the deposit. The nonequilibrium phase relations observed in the Deogbong deposit might be due to local change in intensive thermodynamic variables and fluid transport properties that resulted in the formation of nonequilibrium phases b of several stages.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2005.09a
• /
• pp.21-36
• /
• 2005

Although the main geology of Korea consists of granite and gneiss, it Is not uncommon to encounter anisotropy Phenomena in crosshole radar tomography even when the basement is crystalline rock. To solve the anisotropy Problem, we have developed and continuously upgraded an anisotropic inversion algorithm assuming a heterogeneous elliptic anisotropy to reconstruct three kinds of tomograms: tomograms of maximum and minimum velocities, and of the direction of the symmetry axis. In this paper, we discuss the developed algorithm and introduce some case histories on the application of anisotropic radar tomography in Korea. The first two case histories were conducted for the construction of infrastructure, and their main objective was to locate cavities in limestone. The last two were performed In a granite and gneiss area. The anisotropy in the granite area was caused by fine fissures aligned in the same direction, while that in the gneiss and limestone area by the alignment of the constituent minerals. Through these case histories we showed that the anisotropic characteristic itself gives us additional important information for understanding the internal status of basement rock. In particular, the anisotropy ratio defined by the normalized difference between maximum and minimum velocities as well as the direction of maximum velocity are helpful to interpret the borehole radar tomogram.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.3
• /
• pp.157-165
• /
• 2006

The change of external/internal factors of the cell rquires specific biological functions to maintain life. Such functions encourage particular genes to jnteract/regulate each other in multiple ways. Accordingly, we applied a linear decomposition model IFSA, which derives hidden variables, called the 'expression mode' that corresponds to the functions. To interpret gene interaction/regulation, we used a cross-correlation method given an expression mode. Linear decomposition models such as principal component analysis (PCA) and independent component analysis (ICA) were shown to be useful in analyzing high dimensional DNA microarray data, compared to clustering methods. These methods assume that gene expression is controlled by a linear combination of uncorrelated/indepdendent latent variables. However these methods have some difficulty in grouping similar patterns which are slightly time-delayed or asymmetric since only exactly matched Patterns are considered. In order to overcome this, we employ the (IFSA) method of [1] to locate phase- and shut-invariant features. Membership scoring functions play an important role to classify genes since linear decomposition models basically aim at data reduction not but at grouping data. We address a new function essential to the IFSA method. In this paper we stress that IFSA is useful in grouping functionally-related genes in the presence of time-shift and expression phase variance. Ultimately, we propose a new approach to investigate the multiple interaction information of genes.

• Journal of KIISE:Computing Practices and Letters
• /
• v.9 no.4
• /
• pp.393-409
• /
• 2003

In this paper, we present a multi-task debugging environment for Qplus-T embedded-system such as internet information appliances. We will propose the structure and functions of a remote multi-task debugging environment supporting environment effective ross-development. And, we are going enhance the communication architecture between the host and target system to provide more efficient cross-development environment. The remote development toolset called Q+Esto consists to several independent support tools: an interactive shell, a remote debugger, a resource monitor, a target manager and a debug agent. Excepting a debug agent, all these support tools reside on the host systems. Using the remote multi-task debugger on the host, the developer can spawn and debug tasks on the target run-time system. It can also be attached to already-running tasks spawned from the application or from interactive shell. Application code can be viewed as C/C++ source, or as assembly-level code. It incorporates a variety of display windows for source, registers, local/global variables, stack frame, memory, event traces and so on. The target manager implements common functions that are shared by Q+Esto tools, e.g., the host-target communication, object file loading, and management of target-resident host tool´s memory pool and target system´s symbol-table, and so on. These functions are called OPEn C APIs and they greatly improve the extensibility of the Q+Esto Toolset. The Q+Esto target manager is responsible for communicating between host and target system. Also, there exist a counterpart on the target system communicating with the host target manager, which is called debug agent. Debug agent is a daemon task on real-time operating systems in the target system. It gets debugging requests from the host tools including debugger via target manager, interprets the requests, executes them and sends the results to the host.

• Investigative Magnetic Resonance Imaging
• /
• v.1 no.1
• /
• pp.119-124
• /
• 1997

Purpose: To assess the utility of magnetic resonance(MR) cerebral blood volume (CBV) map in the evaluation of brain tumors. Materials and Methods: We performed perfusion MR imaing preoperatively in the consecutive IS patients with intracranial masses(3 meningiomas, 2 glioblastoma multiformes, 3 low grade gliomas, 1 lymphoma, 1 germinoma, 1 neurocytoma, 1 metastasis, 2 abscesses, 1 radionecrosis). The average age of the patients was 42 years (22yr -68yr), composed of 10 males and S females. All MR images were obtained at l.ST imager(Signa, CE Medical Systems, Milwaukee, Wisconsin). The regional CBV map was obtained on the theoretical basis of susceptibility difference induced by first pass circulation of contrast media. (contrast media: IScc of gadopentate dimeglumine, about 2ml/sec by hand, starting at 10 second after first baseline scan). For each patient, a total of 480 images (6 slices, 80 images/slice in 160 sec) were obtained by using gradient echo(CE) single shot echo-planar image(EPI) sequence (TR 2000ms, TE SOms, flip angle $90^{\circ}$, FOV $240{\times}240mm,{\;}matrix{\;}128{\times}128$, slice-thick/gap S/2.S). After data collection, the raw data were transferred to CE workstation and rCBV maps were generated from the numerical integration of ${\Delta}R2^{*} on a voxel by voxel basis, with home made software (${\Delta}R2^{*}=-ln (S/SO)/TE). For easy visual interpretation, relative RCB color coding with reference to the normal white matter was applied and color rCBV maps were obtained. The findings of perfusion MR image were retrospectively correlated with Cd-enhanced images with focus on the degree and extent of perfusion and contrast enhancement. Results: Two cases of glioblastoma multiforme with rim enhancement on Cd-enhanced Tl weighted image showed increased perfusion in the peripheral rim and decreased perfusion in the central necrosis portion. The low grade gliomas appeared as a low perfusion area with poorly defined margin. In 2 cases of brain abscess, the degree of perfusion was similar to that of the normal white matter in the peripheral enhancing rim and was low in the central portion. All meningiomas showed diffuse homogeneous increased perfusion of moderate or high degree. One each of lymphoma and germinoma showed homogenously decreased perfusion with well defined margin. The central neurocytoma showed multifocal increased perfusion areas of moderate or high degree. A few nodules of the multiple metastasis showed increased perfusion of moderate degree. One radionecrosis revealed multiple foci of increased perfusion within the area of decreased perfusion. Conclusion: The rCBV map appears to correlate well with the perfusion state of brain tumor, and may be helpful in discrimination between low grade and high grade gliomas. The further study is needed to clarify the role of perfusion MR image in the evaluation of brain tumor.