• Journal of Broadcast Engineering
• /
• v.16 no.3
• /
• pp.490-500
• /
• 2011

The channels of domestic FM broadcast are needed to provide various kinds of new broadcasting services. However, available channels are limited and saturated. The channel interval of FM broadcast is changed from 200 kHz to 100 kHz to maximize utilization efficiency of scarce broadcast spectrum at all over the world. Also, there are many researches such as IBOC(In Band On Channel) and DRM+(Digital Radio Mondial+) that is to allocate the digital signal beside analog bandwidth. But output power is decrease to avoid interference between adjacent radio stations. In this paper, we analyzes the problems of the protection ratio which is decided in 1986 and we propose method to improve about 7~10dB significantly the protection ratio according to the recent DSP(Digital Signal Processing) techniques without loss of both transmission power and broadcast quality. In addition, we examined the possibility of securing two times available channels by reducing minimum frequency interval from 800 kHz to 400 kHz or 600 kHz in the equal site.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.10
• /
• pp.1833-1839
• /
• 2017

Korea Railway is enhancing the railway wireless communication system from VHF and TRS which have been used for 100 years to LTE-R starting with Ministry of Science and ICT's allocation of Integrated Public Network Frequency on December 2014. LTE-R has advantages on technology performance, also on ease of evolution based on standardization compared to existing technologies. However there are few problems that need to be solved to provide stable railway wireless services in the future. Due to national spectrum policy, LTE-R has frequency interference with Integrated Public Networks (PS-LTE, LTE-M ) and UHD-TV which was commercialized in 2017. This paper introduces performance changes caused by interferences which were founded from the test bed in Wonju~Gangneung LTE-R project and the result of RAN-Sharing. In addition, this paper suggests the standard for LTE-R cell planning in the case of sharing the Integrated Public Network Frequency by analyzing the changes of designed link-budget factor based on the test result.

• Journal of KIISE
• /
• v.44 no.11
• /
• pp.1231-1235
• /
• 2017

Given the network structure in online social network, it is important to determine a way to distinguish spam accounts from the network features. In online social network, the service provider attempts to detect social spamming to maintain their service quality. However the spammer group changes their strategies to avoid being detected. Even though the spammer attempts to act as legitimate users, certain distinguishable structural features are not easily changed. In this paper, we investigate a way to generate meaningful network structure features, and suggest spammer detection method using recursive structural features. From a result of real-world dataset experiment, we found that the proposed algorithm could improve the classification performance by about 8%.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.1
• /
• pp.39-47
• /
• 2005

In this paper, a method of station keeping strategy using relative orbital motion and numerical optimization technique is presented for geostationary spacecraft. Relative position vector with respect to an ideal geostationary orbit is generated using high precision orbit propagation, and compressed in terms of polynomial and trigonometric function. Then this relative orbit model is combined with optimization scheme to propose a very efficient and flexible method of station keeping planning. Proper selection of objective and constraint functions for optimization can yield a variety of station keeping methods improved over the classical ones. Results from the nonlinear simulation have been shown to support such concept.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.25 no.5
• /
• pp.425-430
• /
• 2015

This paper is a study to improve the classification efficiency of rotating objects by using deep neural networks to which a deep learning algorithm was applied. For the classification experiment of rotating objects, COIL-20 is used as data and total 3 types of classifiers are compared and analyzed. 3 types of classifiers used in the study include PCA classifier to derive a feature value while reducing the dimension of data by using Principal Component Analysis and classify by using euclidean distance, MLP classifier of the way of reducing the error energy by using error back-propagation algorithm and finally, deep learning applied DBN classifier of the way of increasing the probability of observing learning data through pre-training and reducing the error energy through fine-tuning. In order to identify the structure-specific error rate of the deep neural networks, the experiment is carried out while changing the number of hidden layers and number of hidden neurons. The classifier using DBN showed the lowest error rate. Its structure of deep neural networks with 2 hidden layers showed a high recognition rate by moving parameters to a location helpful for recognition.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.7
• /
• pp.65-70
• /
• 2012

In this paper, a compact UWB (Ultra Wideband) BPF(Band-Pass Filter) with dual notched bands is proposed using a hybrid Composited Right-Left Handed (CRLH) and Defected Ground Structure (DGS). To avoid the interferences such as Wireless LAN (Center frequency: 2.4GHz and 5.8GHz), the CRLH is employed to obtain the dual notched bands and the DGS is used to obtain the wide stop-band above the pass-band. The fabricated filter has good performance and has more than 30dB rejection at the center frequency of 2.4 GHz and 5.8GHz. The dual notched bands are easily movable by changing the CRLH parameter. Also the insertion loss is less than 0.4dB in the lower pass-band and 0.7dB in the upper pass-band, and it has small group delay variation less than 0.6ns. The size of the fabricated filter is very compact (17mm*17mm).

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.4 s.304
• /
• pp.133-142
• /
• 2005

In this paper, two digital video scrambling methods are proposed as simple means of the digital content protection techniques. One is inter block scrambling using motion vector, the other is intra block scrambling using intra prediction mode. The proposed inter block scrambling method distorts the original sequences by swapping horizontal and vertical components of motion vector. This method can be applied on most common video coding techniques such as MPEG-1, 2, 4, H.264, etc. The proposed intra block scrambling method distorts the original sequences by modifying intra prediction mode that is property of H.254 video coding technique. Both methods do not cause my bit rate increase after scrambling. Moreover, they have low complexity because they need only simple operation like XOR. Especially, the proposed intra block scrambling does not distort inter blocks directly. But inter blocks are distorted by error propagation effect as much as intra blocks. This paper introduces two new digital video scrambling method and verifies its effectiveness through simulation.

• Journal of the Institute of Convergence Signal Processing
• /
• v.7 no.4
• /
• pp.184-188
• /
• 2006

This paper presents DSP based narrow band satellite communication signal power detector for tracking control of mobile satellite antenna system. An analog filter based conventional power detector has poor performance due to frequency drift of carrier. Also, it is very difficult to change an analog filter bandwidth according to changed bandwidth of transmitted signal. To solve these difficulties, we proposed DSP based signal power detector, which is easy to change bandwidth of filter and to match shifted frequency of carrier. The proposed signal power detector consists of a FFT function to measure frequency drift of carrier, a programmable filter bank function to limit of received signal bandwidth and a power calculation function to measure power of filtered signal in 12-bit linear scale. Test results of implemented signal power detector, based on TMS320C5402 DSP, showed that it satisfied required functions and performances and properly operated.

• Proceedings of KOSOMES biannual meeting
• /
• 2008.05a
• /
• pp.191-195
• /
• 2008

In Ansan (the headquarter of KORDI ; Korea Ocean Research & Development Institute), KOSC(Korea Ocean Satellite Center) is being prepared for acquisition, processing and distribution of sensor data via L-band from GOCI(Geostationary Ocean Color Imager) instrument which is loaded on COMS(Communication, Ocean and Meteorological Satellite); it will be launched in 2009. The basis equipment of KOSC(Electric power, Network, Security) has been constructed in 2007. KOSC is being constructed data processing and management system, GOCI L-band reception system, etc. The final object of KOSC is that maximize the application of GOCI.

• Journal of Advanced Navigation Technology
• /
• v.24 no.6
• /
• pp.593-600
• /
• 2020

The equipment for marine IoT service have to overcome the effect of seawater. Furthermore, the free floating transmitter in seawater will be less affected by the seawater environment. The results of the design and fabrication of antenna, which is embedded in buoy, are shown in this research. The proposed antenna is used to supervise the states of fishing gears in monitoring system for real-name system of electric fishing gear. The selected frequency band of the proposed antenna is 920 MHz, and PCB pattern type is selected for subminiature and light weight. It is confirmed that RF characteristics is more degraded, however, the radiation is gradually upward as the contact surface of buoy with seawater is more broaden through the simulation results. That is, the RF performance of the proposed antenna is more deteriorated but beam radiation characteristics is more suited the marine IoT, the seawater effect is more increased. It is expected that the proposed antenna will contribute the implementation of IoT network based on low power wide area (LPWA) when the degradation of RF performance will be settled.