• Title/Summary/Keyword: 벽 구성

Search Result 540, Processing Time 0.025 seconds

Characteristics of Carbon Nanotube Oscillator for Embedded System (임베디드 시스템을 위한 탄소나노튜브 오실레이터의 특성 해석)

  • Lee, Jun-Ha;Yang, Seung-Won
    • Proceedings of the KAIS Fall Conference
    • /
    • 2008.05a
    • /
    • pp.180-183
    • /
    • 2008
  • 탄소 나노 튜브(CNT)들로 구성된 다중벽 탄소 나노튜브 진동은 분자사이의 역학적인 시뮬레이션에 의해 조사되었다. 그 결과는, 벽간의 결합이 주파수 분할을 이끌고 세개의 주파수 제너레이터로써의 2차 함수 벽, 5차 벽, 6차벽으로 된 오실레이터와 직경으로부터 독립적인 적합성 제안을 위해 지속적인 세개의 정점이 있다는것을 보여준다. 더욱이 적어도 MWCNT 진동의 초기의 주파수중 하나는 이중벽진동의 초기주파수보다 낮다.

  • PDF

Changes in the Cell Wall Components and Cell Structure of Tomato Fruits during Maturation (토마토 과실의 성숙중 세포벽 성분 및 조직의 변화)

  • 신승렬;문광덕
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.25 no.2
    • /
    • pp.274-278
    • /
    • 1996
  • 토마토 과실의 연화현상의 주 원인으로 판단되는 세포벽의 형태적 변화를 조사하기 위하여 성숙 단계별로 취하여 과실의 경도, 세포벽 구성 성분의 변화 및 세포벽의 변화를 조사하였다. 과육의 경도는 적숙기 이후부터 급셕한 감소를 나타내었다. 세포벽 함량은 성숙 중에 감소하였고 가용성 펙틴의 증가와 불용성 펙틴의 감소는 적숙기와 식용 적기 사이에서 가장 현저했으며, 총 펙텐의 함량은 다소 감소하는 경향을 나타내었다. 성숙에 따른 토마토 과육의 세포 및 세포벽의 형태적 변화를 현미경으로 관찰한 결과, 수확기까지의 토마토에서는 middle lamella와 세포내 기관들이 잘 관찰되었으나, 연화가 진행됨에 따라 식용 적기의 토마토에는 middle lamella를 관찰할 수 없었으며 과숙기 에서는 middle lamella의 가용화와 함께 세포벽의 부분적인 분해와 세포분리현상이 관찰되었다.

  • PDF

Extraction of Coronary Arteries Wall based on Wavelet in IVUS Image (IVUS영상에서 웨이블릿 기반의 관상동맥 벽의 추출)

  • Lee, Na-Young;Kim, Gye-Young
    • Proceedings of the Korean Information Science Society Conference
    • /
    • 2005.11b
    • /
    • pp.940-942
    • /
    • 2005
  • 혈관내부의 초음파는 혈관 벽(vessel wail) 전체를 관찰할 수 있는 단면적 영상(cross-sectional image)으로부터 혈관 벽의 서로 다른 층을 평가할 수 있다. IVUS(Intravascular Ultrasound)영상은 잡음에 매우 민감하고 해상도가 낮기 때문에 혈관 벽의 서로 다른 층을 구분된다. IVUS영상이 내강, 혈관 벽, 외막을 둘러싸는 영역으로 구성되어있다고 가정하면 내부와 외부의 두 경계선으로 구분할 수 있다. 따라서 본 논문에서는 IVUS영상을 웨이블릿 변환하여 주파수 공간에서 관상동맥 벽의 두 경계선을 추출한다. 실험결과를 통하여 관상동맥 벽의 두 경계선이 잘 추출되는 것을 확인할 수 있다.

  • PDF

Selection of Sectional Dimensions and Outrigger Locations of Outrigger Structure Based on Optimum Design Using G.A (GA를 이용한 최적설계 기반 아웃리거 시스템 구조물의 부재 단면 및 아웃리거 위치 선정)

  • Lee, Eun-Seok;Choi, Se-Woon;Park, Hyo-Seon
    • Proceedings of the Computational Structural Engineering Institute Conference
    • /
    • 2011.04a
    • /
    • pp.702-705
    • /
    • 2011
  • 본 논문에서는 초고층 전단벽-아웃리거 시스템에 대해, 기존의 근사해석법과 유전알고리즘을 이용하여, 물량최적설계 기반의 구성요소 단면 및 아웃리거 최적위치 결정에 관해 연구를 진행하였다. 아웃리거 시스템의 최적성은 아웃리거의 위치와 아웃리거 시스템을 구성하는 전단벽-아웃리거, 외곽기둥의 단면 성능의 복잡한 관계에 의해 역학적으로 결정된다. 하지만 기존의 아웃리거 시스템의 최적화 연구는 대부분 전단벽과 아웃리거, 외곽기둥의 단면은 고정된 상태에서, 아웃리거의 위치만 설계변수로 하여 아웃리거의 최적위치를 찾는 연구에 국한되어 있다. 이에 본 연구에서는 G.A.를 이용하여, 아웃리거 설치위치뿐만 아니라 전단벽과 아웃리거, 외곽기둥의 단면까지 설계변수로 하여 물량최적설계 조건을 만족시키는 아웃리거시스템의 최적설계 연구를 진행하였다. 또한 반복 계산의 시간을 줄이기 위해 기존의 근사해석법을 사용하였다. 본 연구의 결과는 초고층 구조물의 초기 설계 시에 구성요소의 단면 및 아웃리거 설치 층의 선정에 적극 활용될 수 있을 것이다.

  • PDF

Effect of Mutation in α-COP, A Subunit of the COPI Vesicle, on Cell Wall Biogenesis in Fungi (COPI 소낭 구성체인 α-COP의 돌연변이가 균류 세포벽 합성에 미치는 영향)

  • Lee, Hwan-Hee;Park, Hee-Moon
    • The Korean Journal of Mycology
    • /
    • v.35 no.1
    • /
    • pp.1-10
    • /
    • 2007
  • The cell wall is essential for the survival and osmotic integrity of fungal cells. It is the framework to which biologically active proteins such as cell adhesion molecules and hydrolytic enzymes are attached or within which they act. Recently it was shown that mutations in ${\alpha}-COP$, a subunit of COPI vesicle, is responsible for the thermo-sensitive osmo-fragile phenotype of fungi, such as Saccharomyces cerevisiae and Aspergillus nidulans, and suggested that ${\alpha}-COP$ may play a crucial role in translocation of protein(s) of the ${\beta}-1,3-gulcan$ synthase complex and cell wall proteins, thus may contribute to the maintenance of cell wall integrity. In this review, we summarized the relationship between the intra-cellular protein translocation machinery, especially the ${\alpha}-COP$ of COPI vesicle, and cell wall biogenesis in fungi. We also discussed potential use of secretory mutants in basic and applied research of the fungal cell walls.

An Implementation of Firewall System Supporting High Speed Data Transmission in 3-tier Client/server Systems (3계층 클라이언트/서버 시스템의 고속 전송 침입 차단 시스템 구현)

  • 홍현술;정민수;한성국
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.5 no.7
    • /
    • pp.1361-1373
    • /
    • 2001
  • In the firewall systems of 3-tier client/server systems, in general, data transmission speed is declined rapidly according to the duplicated proxy services in application server and fire wall server. In this paper, an application server configuration containing the proxy functions of firewall system is proposed so that the high speed data transmission can be achieved. The proposed application server can form the dual-homed gateway by means of the additional network interface card. The screened router of application server forms the screened subnet gateway that can separate the internal network. The proposed server configuration is more effective in traffic control than the traditional firewall systems and provides high speed data transmission with the functions of firewall. It can be also cost-effective alternative to the firewall system.

  • PDF

A Preliminary Study on the Application of Compound Sources to Active Noise Barrier (복합음원이 적용된 능동방음벽에 관한 선행 연구)

  • Baek, Kwang-Hyun
    • The Journal of the Acoustical Society of Korea
    • /
    • v.30 no.1
    • /
    • pp.42-48
    • /
    • 2011
  • This preliminary study is about the application of the compound source to the active noise barrier system as control sources. A compound source is composed of two monopole sources but having opposite phase. However, both monopole sources in one compound source are not independently controlled. The source strength of monopole source close to the noise source is proportional to the other one. Therefore, the cost for the hardware system is cheaper than usual system but known to possibly having a similar performance in generating anti-noise acoustic field. In this study, using a simple active noise barrier system model having a non-reflective floor, the effectiveness of the system with compound sources is investigated through computer simulations and shows 30~40 % performance improvement of noise reduction.

Development of Efficient Seismic Analysis Model using 2D T-Shape Rigid-body for Wall-Frame Structures with a Central Core (이차원 T형강체를 이용한 중심코어를 가진 전단벽-골조 구조물의 효율적인 지진해석모델 개발)

  • Park, Yong-Koo;Lee, Dong-Guen;Kim, Hyun-Su
    • Journal of the Computational Structural Engineering Institute of Korea
    • /
    • v.26 no.1
    • /
    • pp.9-17
    • /
    • 2013
  • In this study, an efficient analytical model for the dynamic analysis of tall buildings with a shear wall-frame structural system has been proposed. A shear wall-frame structural system usually consists of a core wall showing flexural behavior and a frame presenting shear behavior. Therefore, the deformed shape of the shear wall-frame structural system is shown by the combination of flexural mode and shear mode. These characteristics should be considered when an efficient analytical model is developed. To this end, the effect of shear wall and frame on the dynamic behavior of a tall building with a dual system has been separately investigated. In this study, the structural characteristics of a separated individual shear wall model and the frame model without shear wall has been evaluated. In order to consider the effect of the shear wall in the frame model without shear wall, a rigid body was used instead of the shear wall. Each equivalent model for the separated shear wall part and frame part has been independently developed and two equivalent models were then combined to create an efficient analytical model for tall buildings with a shear wall-frame structural system. In order to verify the efficiency and accuracy of the proposed method, time history analyses of tall buildings with a shear wall-frame system were performed. Based on analytical results, it has been confirmed that the proposed method can provide accurate results, requiring significantly reduced computational time and memory.

TIS Toolkit을 이용한 방화벽 시스템 구축 방법

  • 김봉한;김점구;이명선;이용준;이재광
    • Review of KIISC
    • /
    • v.7 no.4
    • /
    • pp.13-28
    • /
    • 1997
  • 본 논문에서는 해커의 불법적인 공격으로부터 전산망을 안전하게 보호하기 위하여 Trusted Information System에서 발표한 공개 버전인 TIS Firewall Toolkit의 방화벽 시스템 구조와 구성요소를 분석하였고 그리고 구축방법에 대하여 기술하였다. 또한 툴킷에서 제공하는 관리 지원 도구인 Port scanner, network subnet ping manager, reporting도구 등을 분석하였다. 본 논문에서 기술한 TIS 툴킷을 이용한다면, 상용 방화벽 시스템을 구축하기 전에 , 보다 쉽게 기관의 보안 정책 개발과 전산망 보호 기술을 확보할 수 있다.

  • PDF

NAT Proxy for Grid Computing (그리드 컴퓨팅을 위한 NAT 프락시)

  • Kim, Eun-Sung;Park, Hyung-Woo;Lee, Sang-San;Chung, Jin-Wook
    • Proceedings of the Korea Information Processing Society Conference
    • /
    • 2002.04a
    • /
    • pp.331-334
    • /
    • 2002
  • 그리드란 지리적으로 분산된 컴퓨터, 데이터베이스, 과학장비 등을 초고속 네트워크를 통하여 연결하여 가상의 슈퍼컴퓨터로 활용하고자 하는 노력으로 탄생하였다. 이러한 그리드를 가능하게 하는 소프트웨어 기반 구조로 글로버스 미들웨어가 있다. 본 논문에서는 방화벽으로 구성된 네트워크 환경에서 글로버스를 사용할 때의 여러 가지 문제점들을 고찰하고 기존 해결 방안을 살펴보았다. 또한 기존 방안에서 해결하지 못하는 NAT 방화벽에서의 문제점을 해결하기 위해서 GSI 권한위임 메커니즘을 확장하여 NAT 프락시를 제안하였다. 이 NAT 프락시를 통하여 NAT 방화벽으로 구성된 네트워크 환경에서도 글로버스를 사용할 수 있을 것으로 기대한다.

  • PDF