• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.5
• /
• pp.837-846
• /
• 1989

Belt tension distribution for an abrasive blet grinding was investigated analytically and experimentally for (1) slack side and (2) tight side blet grinding. Classical Eytelwein equation was used to predict the belt tension distribution with dividing contact angles into (1) inactive and (2) active angles. General friction theory was modified based on the friction force between the belt and the support in the grinding contact area that was obtained by experiments. It was found that analytical results were in good agreement with the experimental results. Also, the tight side belt grinding was recommended since it could carry out more grinding load than that of slack side belt grinding.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.3
• /
• pp.457-465
• /
• 1988

The inside contact characteristics in abrasive belt drives were investigated analytically and experimentally for (1) driver pulley contact wheel and (2) driven pulley contact wheel. The concentrated contact forces in the grinding zone divided the entire belt-pulley contact are by three distinct areas and the tangential friction forces in the active areas caused the normal forces to change, which resulted in the different belt force distribution compared with those of the ordinary flat belt drives. The experimental results for the normal pressure (belt tension) distribution were in good agreement with the theoretical results.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1992.10a
• /
• pp.321-324
• /
• 1992

산업기술이 급속히 발전함에 따라 전자.통신기기, 광학기기 및 정밀 공작기기 부문에서 핵심부품의 치수, 형상 운동 정밀도가 높아지게 되었고, 이를 가공하기 위한 고정밀 가공기술이 요구되게 되었으며 특히, 고정밀 가공을 위해서 고정밀 주축이 필요하게 되었다. 따라서 본 연구에서는 연삭기와 같이 요구정도가 매우 높은 경우 동력전달요소로서 V벨트 및 평벨트가 회전정도에 미치는 영향을 실험적으로 검토하여 연삭기 주축 등에 응용되는 유정압 주축의 고정도화를 실현하기 위한 지침이 될 수 있는 정량적인 자료를 제시하는 것을 목적으로 하고 있다.