• 제목/요약/키워드: 베일러 작업

검색결과 5건 처리시간 0.017초

볏짚 베일의 함수비와 밀도가 저장 중 부패정도에 미치는 영향 (Effect of Moisture Content and Density to the Decay of Rice Straw Bale during Storage)

  • 김종언;박홍제;김경욱
    • 한국농업기계학회:학술대회논문집
    • /
    • 한국농업기계학회 1999년도 하계 학술대회 논문집
    • /
    • pp.221-227
    • /
    • 1999
  • 베일러 작업에 있어 작업시의 볏짚의 함수율은 베일러의 작업성, 저장 중에 발생하는 볏짚의 물리적, 화학적 변화 등에 있어 중요한 요소로 작용한다. 국내의 경우 가을철에 청명하고 건조한 날이 많아 볏짚이 빠르게 건조되나 일기가 고르지 못한 경우에는 높은 함수율에서도 작업을 해야할 경우가 생긴다. 높은 함수율에서 작업하는 경우 필연적으로 베일의 질적 저하가 일어나는데 이를 줄이는 방법의 하나로 밀도를 조정하는 방법이 있다. (중략)

  • PDF

하이브리드 농업용 트랙터의 제어 전략 개발을 위한 작업 부하 분석 (Analysis of Work Load for Developing the Control Strategy of Hybrid Agricultural Tractor)

  • 김진성;박영일
    • 한국자동차공학회논문집
    • /
    • 제23권2호
    • /
    • pp.239-245
    • /
    • 2015
  • In order to control the hybrid power system efficiently, the knowledge for the required load of the system is important. The agricultural tractor performs various farm works such as plow, rotary, and baler. When it performs rotary tillage and baler operation, the generated work load is analyzed. To analyze trend of work load, moving average technique is applied to the measurement data. Optimal control inputs for the two works are obtained from simulation using the dynamic programming. The novel fundamental control strategy for parallel hybrid tractor called Max. SOC is proposed.

농작업을 고려한 농업용 하이브리드 트랙터의 토크 지원 전략 개발 (Torque Assist Strategy for Hybrid Agricultural Tractor with Consideration of Field Operations)

  • 최상천;송봉섭;김용주
    • 대한기계학회논문집A
    • /
    • 제38권6호
    • /
    • pp.593-600
    • /
    • 2014
  • 본 논문은 농작업 시 농업용 하이브리드 트랙터를 위한 토크 지원 전략을 제안한다. 일반적으로 농업용 트랙터는 베일러, 로타리 등 농작업 종류에 따라 필요한 토크의 크기가 다양하기 때문에 특수목적을 위하여 출력이 큰 트랙터가 필요할 수 있다. 따라서 본 연구에서는 연비개선보다는 작은 모터를 사용하여 특정 농작업에 필요한 적절한 토크 지원을 수행함으로써 동일한 사이즈의 기존 트랙터보다 다양한 농작업을 좀 더 효율적으로 수행할 수 있는 하이브리드 트랙터 개발을 목표로 한다. 이를 위한 토크 지원 전략을 제안하고 상용 차량 시뮬레이터인 Autonomie 를 기반으로 한 하이브리드 트랙터 모델을 이용하였다. 마지막으로 토크 어시스트 전략을 적용한 하이브리드 트랙터와 일반 트랙터에 대한 시뮬레이션을 통해 작업 효율과 연료 사용량을 검증하였다.

베일러 작업 시 트랙터 소요동력 분석 (Analysis of Power Requirement of Agricultural Tractor during Baler Operation)

  • 김용주;이대현;정선옥;박승제;최창현
    • Journal of Biosystems Engineering
    • /
    • 제36권4호
    • /
    • pp.243-251
    • /
    • 2011
  • Purpose of this study was to analyze power requirement of an agricultural tractor for baler operation. First, a power measurement system was developed and installed in a 75 kW agricultural tractor. Strain-gages with a telemetry system were used to measure torques of transmission and PTO input shafts. An engine tachometer was used to measure rotational speed of transmission and PTO input shafts. The measurement system also included pressure sensors to measure pressure of hydraulic pumps, an I/O interface to acquire the sensor signals, and an embedded system to determine power requirements. Second, field experiments were conducted at two PTO speed levels, and proportion of utilization ratio of rated engine power and power consumption of major parts (transmission input shaft, PTO input shaft, main hydraulic pump, and auxiliary hydraulic pump) were analyzed. Results of usage proportion of engine power for PTO speed level 1 and 2 were 4.1 and 2.2%, 31.5 and 16.3%, 49.6 and 59.7%, 14.4 and 20.8%, and 0.4 and 1.0%, respectively, for ratio of measured engine power to rated engine power of less than 25%, 25 ~ 50%, 50 ~ 75%, 75 ~ 100%, and greater than 100%. The results showed that the usage proportion increased in the range with the ratio of power requirement to rated engine power of over than 50% when the PTO gear was shifted from P1 to P2. Averaged engine power requirement for baling operation, tying and discharging operation, and total operation were 43.3, 37.3, and 42.0 kW and 49.0, 37.0, and 47.4 kW, respectively, for PTO speed level 1 and 2. Paired t-test showed significant difference in power consumption of engine, transmission input shaft, and PTO input shaft for different PTO speed levels. Therefore, the power consumption of engine for baler operation increased when the PTO gear was shifted from P1 to P2. It was indicated that the power requirement of tractor was affected by the PTO rotational speed for baler operation.

주요 사료작물의 곤포 Silage 조제이용에 관한 연구 II. 생육단계별 건물축적형태화 곤포사일리지 조제이용 (Study on Baled Silage Making of Selected Forage Crop and Pesture Grasses II. Yield performance and nutritieve evaluation of baled silage as affected by stage of growth)

  • 김정갑;한민수;김건엽;한정대;강우성;신정남
    • 한국초지조사료학회지
    • /
    • 제15권3호
    • /
    • pp.198-206
    • /
    • 1995
  • 본 연구는 1991년부터 1993년까지 사료작물과 목초류 7종(호맥, 대맥, 연맥, Italian ryegrass, alfalfa, orchardgrass 및 혼과목초)을 공시재료로 하여 곤포사일리지(BS=baled silage making)조제이용을 위한 수확시기와 이때의 BS 생산성 및 품질을 평가하였다. 시험방법에 있어서 작물재배는 농촌진흥청의 사료작물 및 목초 표준경종방법에 준하여 실시하였다. 사일리지 조제작업중 BS는 자체적으로 제작한 각형 베일러를 이용 개체당 크기 90cm$\times$60cm$\times$50cm, 중량은 건물기준 20kg 내외, 곤포압착 21~23mm를 유지하여 조제하였다. 한편 고수분 재료는 수분정도에 따라 예건처리(무처리, 0.5일 및 1.0일)와 formic acid(무처리, 0.3% 및 0.6%)를 병행 처리하여 BS 를 조제하였다. 맨류작물의 BS 생산을 위한 수확적기는 대맥, 황숙기, 호맥과 연맥은 유숙기 이었으며 이때의 BS 수량은 각각 11.92톤(대맥), 12.64톤(호맥) 및 8.41톤/ha(연맥)이었다. Italian ryegrass 및 목초의 수확적기는 각 초종 모두 개화기로서 년간 BS 생산성은 Italian 13.81톤(2회 예취), 혼파목초 11.46톤(3회), alfalfa 10.62톤/ha(3회)이었다. 한편 조기수확에 따른 고수분 재료의 BS 품질은 무처리시의 35점에서 예건 및 FA 동시처리시에는 84점으로 향상되었다. Italian tyegrass의 BS품질도 무처리시의 61점에서 예건 및 FA 처리시에는 88점으로 개선되는 효과가 있었다.

  • PDF