• 한국유체기계학회 논문집
• /
• 제3권2호
• /
• pp.36-43
• /
• 2000

This study presents the centrifugal compressor performance for three different vane stagger angles and wall pressure distribution within vaned diffuser channels, and is also discussed about the stability with respect to the compressor components. As the vane stagger angle decreases, the flow rate for the stall onset decreases, and higher pressure can be obtained at the low flow rate region, however, the effective operation range of the compressor decreases because of the blockage effect of the diffuser vane. Low pressure pocket within the vaned diffuser channel moves from the pressure side of leading edge to the suction side as the flow rate decreases. The compressor system stability mainly depends on that of the diffuser.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2002년도 유체기계 연구개발 발표회 논문집
• /
• pp.17-30
• /
• 2002

The design method of turbomachinery has been developed highly. But some geometric dimensions have been determined from the empirical view points. In designing the inlet outer diameter of pump impeller and the hub ratio of blower, satisfactory theoretical grounds have not been presented till now. In the paper, these points are discussed and the method of increasing pump and blower efficiencies are also discussed on the basis of experimental and computational results of flow analysis. Further, the effects of tip clearance of rotor on its efficiency and the interference of rotor and stator blade rows are discussed and some ideas to estimate their effects are presented.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 1999년도 유체기계 연구개발 발표회 논문집
• /
• pp.55-60
• /
• 1999

A centrifugal compressor was tested with three different diffusers with plate vanes. The vane inlet angle was varied from 15 to 30 dog. The higher static pressure rises are obtained with lower vane stagger angle. In the stable region the static pressure field in vaneless space is very sensitive to flow rate. The impeller has a stabilizing effect over the whole stable operating range. The diffuser has a stabilizing effect at high flow rate but is destabilizing at low flow rate.

• 대한기계학회논문집B
• /
• 제35권8호
• /
• pp.781-787
• /
• 2011

본 연구에서는 4단으로 구성된 LNG 플랜트용 프로판 냉매 원심 압축기 각 단의 설계점에 대해 상용 코드를 이용하여 공력설계를 하였다. 1차원 공력 설계 결과와 3차원 유로 형상의 타당성은 유동해석을 통해 확인하였다. 특히 입구전압이 높고 회전수가 큰 4단 압축기 임펠러의 유로와 베인리스 디퓨저 내부 유동에 대한 속도장, 압력장 및 엔트로피 등의 유동특성에 대해 고찰하였고, 아울러 익단 간극이 유동장에 미치는 영향에 대해서도 알아보았다. 본 연구 결과는 프로판 냉매 압축기의 시스템 제작에 활용될 것이며 추후 실제 실험결과와 비교하고자 한다. 향후 설계된 프로판 냉매압축기에 대한 LNG 플랜트에서의 실증시험을 통해 구체적인 설계결과에 대한 평가 및 설계 개선이 이루어지리라 생각한다.