• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
• /
• pp.497-500
• /
• 2000

절삭 작업과정에서 발생하는 버는 공구와 피삭재가 만나는 상태에 따라 그 형상이 결정되어진다. 공구와 피삭재 사이의 각, 공구의 회전속도, 이송속도, 피삭재의 종류등은 이러한 버의 형상을 결정하는데 결정적인 역할을 하므로, 실험에 의해서 생성된 단계별 자료를 CAD 및 CAM 데이터와 연관시켜 효율적인 알고리즘을 만들고자 한다. 특별히 공장자동화에 따른 작업의 자동화뿐 아니라 관리 체계의 정립을 위하여 전문가 시스템의 도입 역시 시급히 요구되고 있는 실정이다. 여기서 CAD 데이터는 피삭재에 대한 특징 형상의 정보를 포함하고 있기 때문에 피삭재의 형상에 대한 정보를 얻을 수 있다. 인식된 형상에 대하여 Exit 버 형성시 접점과 Exit Angle을 계산하기 위해 도형의 방향인식이 필요하며, 이를 통해 공구와 피삭재와의 관계를 산출하여 Exit 버의 판별을 수행할 수 있다. 본 논문에서는 이러한 과정을 수행하는 프로그램을 개발한다.

• 한국정밀공학회지
• /
• 제18권2호
• /
• pp.199-205
• /
• 2001

Burr makes troubles on manufacturing process due to deburring cost, quality of products and productivity. This paper described the results of experimental study on the influence of the cutting parameters on the formation of exit burrs in face milling. Using the results of experimental study, burr types are classified and data bases are developed to predict burr formation result. From the CAD file for work geometry and the NC data for tool path, the exit angles are calculated at every edges. This program predicts the burr geometry at exit edges using the prediction algorithm and data bases which are developed experimentally. Simulation results on deformation strain and temperature are also available in specific 2-dimensional cutting conditions. Also algorithm which can determine the exit angle is proposed.

• 한국정밀공학회지
• /
• 제19권8호
• /
• pp.55-62
• /
• 2002

A burr has been defined as undesirable projection of material formed as the result of plastic flow from a cutting or shearing operation. It is unavoidable in all kinds of machining operation. As a result, burr makes troubles on manufacturing process due to deburring cost, quality of products and productivity. In face milling operation, burrs are formed along five edges on the workpiece. In this study, the primary interest is about exit burr The influence of the cutting parameters on the formation of exit burrs in face milling will be described experimentally. Using the results of experimental study, burr types are classified according to appearance and formation mechanism in exit burr. The burr formation mechanism in each type of burr is suggested. Data bases are developed to predict burr formation result.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.823-826
• /
• 2000

Burr formed in drilling are classified into three types. no burr, burrs with cap, teared burr. To control burr size in drilling. the second type burrs with cap are to be formed because it is small and uniform. It is necessary to understand the mechanism of cap formation to derive the burr formation into second type burr with cap. In several materials, second type burrs are formed in drilling by changing cutting conditions. It is observed that cap is formed as a result of the plastic deformation along the outside of exit hole. According to the tension behavior of the material in concentrated region between hole and drill outside edge, the geometry of burr with cap is determined.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 춘계학술대회 논문요약집
• /
• pp.259-259
• /
• 2004

정밀부품의 가공 시에 발생되는 burr는 제품의 정밀도, 성능과 제품의 생산성에도 부정적인 영향을 끼치다. 따라서 효율적인 burr의 제거는 제품의 성능의 향상뿐만 아니라 생산성의 향상에도 긍정적인 영향을 미칠 수 있다. 자기 연마법(Magnetic Abrasive Finishing)은 연마제의 연마특성과 철의 자기화 성질을 이용한다. 자기장내의 자기력선의 응집현상을 통해서 burr를 제거하는 방법이다. 자기 유도자에 의해 형성된 magnet flow를 따라 지립이 정렬을 하고 정렬된 지립은 브러쉬의 역할을 하여 burr를 제거하게 된다.(중략)

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.1043-1046
• /
• 2002

In this paper, drill tests were carried out by modifying drill geometry for burr minimization. Final objective of this study is to develop compatible drill shape for minimization of burr formation. These experimented results with modified drill are measured with laser sensor after performing drilling with variable material. Simultaneously, the cutting force and the torque of various drill geometry have been observed with same cutting condition to judge drill stability. As a result, burr was minimized in step drill with 75$^{\circ}$ step angle at every material.

• 한국정밀공학회지
• /
• 제17권3호
• /
• pp.114-121
• /
• 2000

A new concept drill was developed recently (or increasing accuracy and productivity in drilling operation. The burr formation in drilling causes many problems in deburring operation because burrs are formed inside holes and it is difficult to remove them. Burr formations are observed in drilling operation with a new concept drill and are compared with conventional HSS drill. Several workpieces with different materials are drilled with several cutting conditions, velocity and feed rate. The burr in drilling can be classified into three types according to the location of crack. To observe the burr formation mechanism, the cap which is formed with the new concept drill is observed and measured.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.717-720
• /
• 2000

Burr makes troubles on manufacturing process due to of deburring cost, quality of products and automation. This paper described the results of experimental study on the influence of the cutting parameters on the formation of exit burrs in face milling. Using the results of experimental study, we classified the burr type and developed data bases to predict burr formation result. This program will be used to predict burr type and geometry at a specified location. Simulation results on deformation strain and temperature are also available. Also algorithm which calculate the exit angle is proposed.

• 한국정밀공학회지
• /
• 제17권10호
• /
• pp.170-179
• /
• 2000

The objective of this study is to develop an analytical module for the prediction of burr formation during cutting process using the finite element method. This module is based on the rigid-plastic finite element method, ductile fracture criterion, fracture propagation technique and node separation criterion. The sequence of burr formation from burr initiation through end of burr formation is simulated and investigated by this module. The effect of material properties, such as AL6061-T6, AL2024-T4 and Copper, and cutting condition, such as rake angle and cutting depth, on burr formation is also discussed in this study. To validate this module the analysis results are compared with experimental ones.

• 한국정밀공학회지
• /
• 제20권5호
• /
• pp.57-65
• /
• 2003

The formation of exit burr in drilling metals is analyzed by finite element method. The simplified burr formation model is suggested for the complex mechanism of burr formation in drilling on the basis of experimental data. Using the model the magnitude of burr is predicted and the effect of material properties of workpiece and cutting condition on burr formation is analyzed in the present study. The suggested model is verified by comparing simulation results and experimental ones. The predicted size and shape of burr are in good agreement with those observed by experiment.