• Journal of the Institute of Convergence Signal Processing
• /
• v.11 no.1
• /
• pp.1-8
• /
• 2010

Noise removal methods for noisy images have been studied a lot in the domain of spatial and transform filtering. Low pass filtering was initially applied in the spatial domain. Recently, discrete wavelet transform has widely used for image denoising as well as image compression due to an excellent energy compaction and a property of multiresolution. In this paper, Gabor cosine and sine transform which is considered as human visual filter is applied to image denoising areas using soft thresholding technique. GCST is compared with excellent wavelet transform which uses existing soft thresholding methods from PSNR point of view. Resultant images removed noises are also visually compared. Experimental results with adding four different standard deviation levels of Gaussian distributed noises to real images show that the proposed transform has better PSNR performance of a maximum of 1.18 dB and visible perception than wavelet transform.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2002.05d
• /
• pp.901-906
• /
• 2002

This paper is a research about method, that is used in Rapid Prototyping system, that inserts and extracts watermark in STL(standard transform language) that has a 3D geometrical model. The proposed algorithm inserts watermark in the vertex domain of STL facet without the distortion of 3D model. If we make use of a established algorithm for watermarking of STL, a watermark inserted to 3D model can be removed by simple attack that change order of facet. The proposed algorithm has robustness about these attack. Experiment results verify that the proposed algorithm, to encode and decode watermark in STL 3D geometrical model, doesn't distort a 3D model at all. And it shows that the proposed algorithm is available.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.876-878
• /
• 2016

본 연구에서는 자동차 및 기계부품의 제조공정에서 핵심부품인 밸브바디의 주물공정 후 생성된 버(burr)를 제거하기위한 초음파 디버링 장치를 개발하고자하였다. 초음파 디버링장치는 진동부와 제어부로 구성되고 디버링효과의 극대화를 위해 디버링 수에 포함된 용존가스의 제거가 매우 중요함에 따라 용존가스 제어기법을 적용한 초음파 디버링 장치를 개발하고 평가실험을 수행하였다. 본 연구에서는 초음파 디버링에서의 용존가스에 따른 디버링 성능을 평가하고 실제 시스템에 적용하기위한 산업적용 가능성 평가를 수행하였다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.8
• /
• pp.899-904
• /
• 2011

This This study aims to verify burr formation and to remove the burrs in micro-channel fabrication using micro-machining tools. The machining processes are combined with micro-milling and magnetic abrasive deburring for AISI316 stainless steel. Depending on the micro-milling conditions that are applied, burrs are formed around the side walls. Magnetic abrasive deburring is used to remove these burrs. AISI316 stainless steel is a nonferrous material and its magnetic flux density, which is an important parameter for efficient magnetic abrasive deburring, is low. To enhance this magnetic flux density, we design and build a magnetic array table. The effect of removing burrs is evaluated via SEM and a surface tester.

• Journal of the Korean Ceramic Society
• /
• v.36 no.2
• /
• pp.107-115
• /
• 1999

Microstructural variation and strengthening effects with lamination methods of alumina fiber-reinforced ${\gamma}$-LiAlO2 matrixes for Molten Carbonate Fuel Cell(MCFC) were studied. The porosities of all matrix laminated by hot-pressing of two green sheets under 1 kg/$\textrm{cm}^2$ at 45$^{\circ}C$ for 1 min and by double-casting which the second layer cast on the first green sheet dried for 3.5h were more than 50%. The strength of the Al2O3 fiber-reinforced matrix prepared by lamination was enhanced by 70% in comparison with the non-laminated matrix (115 gf/$\textrm{mm}^2$) and the strength-directionality due to fiber-orientation also could be removed. The strength of matrixes laminated by triple-casting was higher than that of the double-cast matrix, but triple-cast matrix showed the directionality with the casting direction, and furthermore its porosity was less than 50%. Although the strength of matrixes laminated by double-casting (195 gf/$\textrm{mm}^2$) is slightly less than that of matrixes laminated by hot-pressing (212 gf/$\textrm{mm}^2$), the double-casting method was evaluated to be more efficient laminating process in MCFC matrix processing.

• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1981.05a
• /
• pp.3.2-3
• /
• 1981

This paper was attemped to analize 55 cases of fiberoptic bronchoscopy during period of 3 years from Feb. 1978 till Feb. 1981 in Chung Ang University hospital. The results were as follow; 1) In age distribution; Most common age group was 5th decade (15 cases, 27.2%) and the other age groups showed relatively even distribution. 2) The ratio of male to female was 3 to 1. 3) The chief complaints were presented in following order; cough (52%), hemoptysis(25%), dyspnea(23.6%), chest pain(18%), chest disomfort(9%). 4) Direct smear of bronchoscopic aspiration material; Not found 33 cases (60%) were most common finding. In the founded bacteria Gram positive cocci 2 cases (3.6%), Gram negative cocci 2 cases (3.6%), Gram positive bacilli 1 cases (1.8%), Gram negativebacilli 2 cases (3.6%), mixed form 15 cases(27.2%) were presented. 5) Bacterial culture of bronchoscopic aspiration material; No growth 28 cases (50.9%) were most common finding. In the bacterial growth, alpha hemolytic streptococci 10 cases (18.2%), Neisseria group 7cases(12.7%), Klebsiella 2 cases (3.6%), Pseudomonas 2 cases (3.6%), mixed culture 6 cases (10.9%) were presented, 6) The diagnosis of bronchoscopic appearance, laboratory exam., and pathologic exam. of biopsed specimen were 21 cases (38.1%) primary carcinoma of bronchus, 8 cases (14.5%) pulmonary tuberculosis, 7 cases (12.7%) bronchitis in orders.

• The Transactions of the Korea Information Processing Society
• /
• v.2 no.4
• /
• pp.543-553
• /
• 1995

While RAID 5 disk arrays offer advantages of performance and reliability on wide variety of applications, they suffer from the performance degradation with write jobs. To reduce the effect of this problem, parity logging scheme was suggested. This scheme reduces disk busy time by transforming many small random accesses into large sequential accesses. This paper presents a new parity logging technique which prevents parity update image from redundant storing in the disk buffer and reduces parity maintenance overhead. A analytical model and several simulation results of our proposed scheme are presented.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.12
• /
• pp.1984-1991
• /
• 1997

Recently burr technology is rising in the fields of the precision manufacturing and the high quality machining, deburring has treated as a difficult problem on going to the high efficiency, automation in the FMS. Removal of burr with various shapes, dimensions and properties couldn't be standardized and has depended on manual treatment. Especially, deburring for cross hole inside owing to passing through out perpendicular to a main hole is more difficult, the electrochemical method is proper as its solution at practical aspects. Burr elimination in the cross hole drilling of governor shaft used in the automobile engine so far has been worked by a manual post-processing by a skillful worker, which becomes a factor of productivity-down and cost-up so that improvement of machining process is needed. Therefore, for the high efficiency and automation of internal deburring in the cross hole, development of electrochemical deburring technology is needed. So, the new process in the burr treatment is supposed. In this study, characteristics of electrochemical deburring through experiments were identified and factors such as electrolytic gap and electorlytic fluid contributed to removal burr height were analyzed. Also, deburring efficiency and electrolytic performance for cross hole were examined according to electrolytic current and electrochemical deburring condition corresponding to acquired edge quality was found out.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2001.05a
• /
• pp.217-220
• /
• 2001

In the shearing process the burr or rollover must be minimized in order to improve the quality of product. The burr size can be minimized by control of several process parameters. But removal of all burrs are impossible. Most mechanical type deburring methods (vibrating bowls, rotating barrels, shot blasting, for example.) will remove large burrs, other methods use chemical (electro-chemical deburring) or heat (thermal energy deburring). The electro-chemical deburring process removes burrs by the deplating method. Electro-chemical deburring equipment is requires a small capital investment than other methods(mechanical or thermal methods). Electro-chemical deburring method need to many parameters for control such as a time, voltage and concentration of electrolyte. In this paper shows relations of these parameters by experiment.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.14 no.3
• /
• pp.149-154
• /
• 2015

This study has focused on the deburring technology of a vacuum plate for MLCC lamination using electrolytic in-process dressing (ELID) grinding, and the magnetic-assisted polishing (MAP) process. The surface of the vacuum plate has many micro-holes for vacuum suction. They are easily blocked by the burrs created in the surface-flattening process, such as the conventional grinding process. In this study, the MAP process, the ELID grinding process, and an ultrasonic vibration table are examined to remove the micro-burrs that lead to the blockage of the holes. In the results of the experiments, the MAP process and ELID grinding technology showed significant improvements of surface roughness and deburring performance.