• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.11a
• /
• pp.139-140
• /
• 2010

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.4
• /
• pp.68-74
• /
• 2000

Even in a fully automated factory, many deburring operations are carried out manually . To remove or minimize the burreffectively or automatically, understanding of the burr formation which occur at the exit stage of machining is necessary. Burrs can be formed on the feed mark ridges an the edges of the machined parts in machining operations. These burrs are underirable in terms of the surface quality, the precise dimensioning of the machined parts and the safety of operators. This paper demonstrates the effectiveness of using end mill tool on minimizing the exit burr formation in machining . In particular, the experimental relationships between the size of exit burr and the cutting parameters are established in end mill machining . Methods to control the size of exit burr are then explained.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.11
• /
• pp.71-78
• /
• 2003

The exit burrs in the micro-drilling of precision miniature holes are of interest, especially for ductile materials. As burrs from this process can be difficult to remove, it is important to acquire the way of predicting burr types as well as optimal cutting conditions which minimize the burrs. In this paper, an artificial neural network was used for the prediction of burr formation in micro-drilling. First, the influence of cutting conditions including cutting speed, feed and drill diameter on the exit burr characteristics, such as burr size and type, were observed and analyzed. Then. the burr types were classified by using the influential experimental data as input parameters to the neural nets.

• Journal of the KSME
• /
• v.50 no.6
• /
• pp.36-42
• /
• 2010

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.250-253
• /
• 2002

The operation of surface and edge finishing is the last and essential process of parts machining, because a product is completed as an assembly. Therefore, the quality of the finished parts has a direct effect upon the performance of the product. Especially, the edge quality depending on the burr control process is very important. A number of deburring processes have been developed for macro burrs such as barreling, brushing, chemical methods, etc. However, micro burr removal when piercing a very thin plate is very difficult, because this badly deteriorates the surface quality of the processed part. When ultrasonic wave is propagated in liquids, it forms an infinitude of micro bubbles. These bubbles generate extremely strong force, which removes micro burrs. In ultrasonic micro deburring, the problem is that burrs are not removed completely, because only components of the explosive force directly act on the burrs, which is not enough. An attempt was made to remove the burrs using ultrasonic vibration in water with SiC as an abrasive agent. Because of the abrasive, smoother edges have been achieved. There are many control parameters in ultrasonic deburring such as abrasive size, ultrasonic frequency and amplitude, distance between tool and workpiece, tilt angle of workpiece etc. This study focuses on how distance and tilt angle influence deburring effect. A number of experiments for these parameters have been carried out, and then the effect of each parameter analyzed.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.3
• /
• pp.114-121
• /
• 2000

A new concept drill was developed recently (or increasing accuracy and productivity in drilling operation. The burr formation in drilling causes many problems in deburring operation because burrs are formed inside holes and it is difficult to remove them. Burr formations are observed in drilling operation with a new concept drill and are compared with conventional HSS drill. Several workpieces with different materials are drilled with several cutting conditions, velocity and feed rate. The burr in drilling can be classified into three types according to the location of crack. To observe the burr formation mechanism, the cap which is formed with the new concept drill is observed and measured.

• Proceedings of the Korean Information Science Society Conference
• /
• 2002.10d
• /
• pp.460-462
• /
• 2002

본 논문은 융선 방향의 화소값 변화와 융선의 수직 방향 화소값 변화의 차이를 이용하여 지문영상의 부영역 화질을 제거대상 영역(Removable Block)과 융선의 흐름이 불명확한 영역(Obscure Block), 융선의 방향성이 명확한 영역(Clear Block) 세 가지로 분류하였다. RB영역은 특징점 추출과정에서 제외 하였으며 OB 영역은 필터의 방향을 달리한 다수의 게이버(Gabor) 필터의 적용으로 처리하였고, CB 영역은 게이버 필터의 방향을 융선의 방향으로 하여 한번의 수행하였다. FVC2002(The Second Fingerprint Verification Competition) DB3 SetA 지문필터링을 영상을 대상으로 한 실험에서 부영역의 화질을 고려한 경우 EER(Equal Error Rate)이 14.31%의 처리속도 향상을 확인할 수 있었다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.05a
• /
• pp.997-998
• /
• 2012

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.237-238
• /
• 2010

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.10a
• /
• pp.399-400
• /
• 2006