• The Journal of the Korea Contents Association
• /
• v.19 no.6
• /
• pp.249-256
• /
• 2019

Lueco-crystal violet(LCV) is a very effective reagent used to enhance bloodstain. However, when the LCV is treated to the bloody fingerprint, the bubbling occurs, so that the minutiae and features of the fingerprint can be damaged. In this study, we studied a method to reduce the bubbling of LCV. As a result, the most effective method for reduction bubbling and enhancement bloodstain was to treat ethanol-based aminotriazole(AT) solution before LCV treatment.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.10 no.4
• /
• pp.1-10
• /
• 2006

In this paper, a calculation method of the thermodynamic parameters of cryogenic propellant is proposed when a cryogenic propellant tank is pressurized by gaseous helium(GHe) bubbling. Temperature of cryogenic propellant and mass of dissolved GHe into propellant were analyzed at the various operation of pressurization of tile liquid oxygen(LOX) and hydrogen($LH_2$) tank using helium bubbling. It was evaluated how the GHe bubbling influences to the thermodynamic parameters of LOX and $LH_2$ with results of the analysis. With the proposed calculation method, It will be able to confirm the feasibility of GHe bubbling as a pressurization system of cryogenic propellant tank and to optimize the pressurization system using GHe bubbling.

• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.91.1-91.1
• /
• 2005

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.649-649
• /
• 2013

그래핀은 우수한 전기적, 광학적, 기계적인 특성들로 인해 주목을 받아왔지만 그래핀의 상용화에는 많은 문제점들이 있었다. 그 중 비교적 고품질의 대면적 그래핀 필름을 얻기 위한 방법으로 화학증기 증착법이 개발됨에 따라 그래핀 합성은 더 이상 어려운 문제는 아니다. 다만, 소자 제작에 있어서 좋은 전하이동도와 저항을 유지하기 위해 소자 제작과정 중의 도핑의 감소가 중요하다. 본 연구에서는 화학증기 증착법을 통해 만들어진 그래핀 소자 제작과정 중 그래핀 전사과정에서의 도핑을 줄이기 위한 방법으로 전기화학적 박리법(버블링 전사)을 이용하였고 이 때 사용되는 전해질의 종류에 따라 도핑의 영향을 분석하였다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.31 no.2 s.257
• /
• pp.195-201
• /
• 2007

A visualization study of flow characteristics in a mixer using multi-nozzle bubbling was performed. The mixer is filed with liquid glycerin (dynamic viscosity = $1000mPa{\cdot}s\;at\;25^{\circ}C$) and convective mixing is induced by air bubbles generated from 9 orifices installed on the bottom of the mixer. To visualize the flow field, PIV (Particle Image Velocimetry) system consisting of 532nm Nd:YAG laser, $2k{\times}2k$ CCD camera and synchronizer is adopted. The bubbles generated with uniform size and frequency form bubble stream and bubble streams rise vertically without interaction between bubble streams. Mixing efficiency is affected by the height of bubbler and the effective height of bubbler is 20nm from the bottom of the mixer.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2005.02a
• /
• pp.117-117
• /
• 2005

• Journal of Korea Foundry Society
• /
• v.28 no.5
• /
• pp.204-210
• /
• 2008

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2009.06a
• /
• pp.128-129
• /
• 2009

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.3
• /
• pp.152-156
• /
• 2016

Wastewater heat recovery heat pump systems use heated wastewater from public baths or factories as the heat pump's heat source. Generally, this system uses a bare tube evaporator. In the heat transfer process from wastewater to refrigerant, thermal resistance is caused primarily by fouling deposits on the outside surface of tube. Fouling directly increases thermal resistance and decreases heat pump efficiency. Thus, it is desirable to eliminate fouling. In this study, we fabricated a fouling mitigation device using a bubbling fluidized bed with cleaning sponge balls in the wastewater bath. Experimental conditions were as follows: $20^{\circ}C$ cold-water temperature, $40^{\circ}C$ wastewater temperature, 100 L/h cold water flow rate, and $0.161m^2$ heat exchanger surface area. Experimental results showed that the thermal resistance of fouling decreased by 56% with the fluidized bed alone and by 86% with both the fluidized bed and cleaning sponge balls.

• Clean Technology
• /
• v.29 no.1
• /
• pp.31-38
• /
• 2023

Due to water shortages caused by water pollution and climate change, total organic carbon (TOC) standards have been implemented for wastewater discharged from public sewage treatment facilities. Furthermore, there is a growing interest and body of research pertaining to the reuse of sewage treatment water as a secure alternative water resource. The membrane bio-reactor (MBR) method is commonly used for advanced wastewater treatment because it can remove organic and inorganic ions and it does not require or emit any chemicals. However, the MBR process uses a separation membrane (MF), which requires frequent film cleaning due to fouling caused by a high concentration of mixed liquor suspended solid (MLSS). In this study, process improvement and microbubble cleaning efficiency were evaluated to improve the differential pressure, water flow, and MF fouling, which are the biggest disadvantages of operating the MF. The existing MBR method was improved by installing a precipitation tank between the air tank and the MBR tank in which raw water was introduced. Microbubbles were injected into a separation membrane tank into which the supernatant water from the precipitation tank was introduced. The microbubble generator was operated with a 15 day on, 15 day off cycle for 5 months to collect discharged water samples (4L) and measure TOC. As the supernatant water from the precipitation tank flowed into the separation membrane tank, about 95% of the supernatant water MLSS was removed so the MF fouling from biological contamination was prevented. Due to the application of microbubbles to supernatant water from the precipitation tank, the differential pressure of the separation membrane tank decreased by 1.6 to 2.3 times and the water flow increased by 1.4 times. Applying microbubbles increased the TOC removal rate by more than 58%. This study showed that separately operating the air tank and the separation membrane tank can reduce fouling, and suggested that applying additional microbubbles could improve the differential pressure, water flow, and fouling to provide a more efficient advanced treatment method.