• 한국항공우주학회지
• /
• 제36권1호
• /
• pp.14-21
• /
• 2008

밸브 디스크 직경이 25.4 mm 인 소형 버터플라이밸브의 유동특성이 다양한 밸브 닫힘각에 대해 실험적으로 연구되었다. 밸브 디스크각이 작은 경우 유량조절특성을 향상시키기 위해 주어지는 밸브 닫힘각을 0$^{\circ}$, 5$^{\circ}$, 10$^{\circ}$, 20$^{\circ}$, 30$^{\circ}$로 변화시켜 밸브 디스크각에 따른 손실계수를 측정하였다. 또한 밸브선단 형상이 손실계수 변화에 미치는 영향을 조사하였다. 밸브 닫힘각이 증가함에 따라 최대손실계수는 감소하며, 밸브 닫힘각 0$^{\circ}$~5$^{\circ}$에서 가장 큰 감소를 나타냄을 알 수 있었다. 밸브 디스크 형상에 따른 손실계수는 밸브 닫힘각이 0$^{\circ}$인 경우 날카로운 모서리를 갖는 디스크가 더 큰 손실계수를 나타낸 반면, 닫힘각 10$^{\circ}$의 경우 날카로운 모서리를 갖는 디스크의 경우가 더 낮은 손실계수를 나타냄을 알 수 있었다.

• 한국분무공학회지
• /
• 제19권1호
• /
• pp.25-32
• /
• 2014

For reduction of $CO_2$ emission emitted from combustion engine, the developed nations have been focused on R&D of hybrid electric vehicle. Further more, many automobile companies are researching on various techniques related to engine used in HEV to enhance fuel economy. One of key techniques is miller cycle that control a valve timing to reduce compression stroke for saving energy and increase expansion stroke for high power. In this study, it was investigated the in-cylinder flow characteristics of miller cycle with variable intake valve timing by using the ANSYS simulation code. For simulation, the key analytic parameter defined as intake valve closing timing and cam profile. As main results, it was shown that LIVC cause a lower pressure inside cylinder and had better control turbulence intensity.

• 한국분무공학회지
• /
• 제20권3호
• /
• pp.141-148
• /
• 2015

In order to research engine characteristics of spark-ignited engine with intake valve closing timing change for Miller cycle, two cam for LIVC(Late Intake Valve Closing) were designed and fabricated an prototype valvetrain. And intake valve closing timing were adjusted to build low compressing and high expansion cycle for HEV. In experimental study, it were investigated with different engine speed, spark timing and air-fuel ratio to compare base cam and LIVC cam type. It was found that the volumetry efficiency and effective work of compression process were decreased in case of LIVC cam. When compared with the existing results, the maximum pressure in the cylinder was reduced about 12~13 bar and the volumetric efficiency was reduced about 16%.

• 한국분무공학회지
• /
• 제21권1호
• /
• pp.7-12
• /
• 2016

In this study, to research in-cylinder flow characteristics of spark-ignited engine with intake valve closing timing change for Miller cycle. 3D simulation study were used 6 different intake valve profile with $CAD10^{\circ}$ gap for retard intake valve closing timing. Comparison of In-cylinder flow pattern characteristic were accompanied between Base and LIVC. And the efficiency of volume and the work of compression were analyzed with simulation study. When intake valve closing angle was retarded in $CAD50^{\circ}$, the pressure in cylinder was decreased about 12~13 bar and volume efficiency was reduced about 16%. The efficiency of volume and the work of compression were reduced on LIVC.

• 한국기계기술학회지
• /
• 제13권1호
• /
• pp.81-88
• /
• 2011

The triple eccentric butterfly valve has metal sheet and this study about butterfly valve ceiling is an innovative approach. But it is affected by the static pressure as well as cross-current. The damage at the valve on the pipe resulted from the reflux is due to valve leakage. This study is investigated on the triple eccentric disk and it is applied with angle and the static pressure in all cases to develop cross-current triple eccentric butterfly valves. The disc with the diameter of 300A is valve against flow velocity. The entrance pressure by flow characteristics is performed with numerical analysis. As the result, valve torque production is reduced more than the conventional triple eccentric valve and entrance pressure is decreased on the increase of valve open angle. And flow coefficient can be known to be increased.