We have observed the orientation behavior of acicular iron oxides in magnetic layer of the particular magnetic tape after magnetic paint was coated on polyester film. As results of the static orientation, orientation of iron oxides come to the maximum at the front and the back of orientation magnets, but it was a litter lower at the back than at the front, and it slowly decreases and come to the constant level after passing through the orientation magnets. In case of edge portion to be futher away from center in the coated film, the orientation of iron oxides in magnetic layer come to worse than that of the center. We think it is owing to the shape and the magnetic magnitude of orientation magnets. The results of the dynamic orientation are as follows. As the orientation of iron oxides in the particulated magnetic tape is higher, the output properties of tape come to better than ever. And the orientation of iron oxides can be changed by drying condition, as result, the output properties of tape can be also. Therefore we think the considrations of the design of orientation magnets and the control of drying condition are needed to improve output properties of the particulated magnetic tape.
가공공정중 변형을 수반하게 되는 고분자제품은 대부분 고분자사슬의 배향을 갖게 된다. 이렇나 사슬배향은 제품의 기계적, 광학적, 그리고 전기적 특성에 매우 중요한 영향을 미치는 것으로 알려져있다. 지금까지 고분자사슬의 배향상태를 나타내기 위한 여러방법은 모두 배향의 중심축을이 알려져 있다는 가정하에 전개되었다, 그러나 복잡한 배향모드를 갖 는 고분자가공의 경우에 배향중심측이 실험축과 일치하지 않는 경우가 많다 따라서 본연구 에서는 일반적인 고분자의배향상태를 나타내는 방법에 대해 알아보고 실제 고분자 가공공정 에 적용을 위해 실험적으로 배향의 대칭축을 찾을 수 있는 접근방법을 제시하고자 하였다. 그 결과 결정성 고분자의 배향상태를 광각 x-선 회절 data를 이용한2차배향 tensor를 통해 배향 타원체를 구성할수있었다. 이를PETdustls 필름과 HDPE사출성형물에 적용해 본 결과 이들의 2차 배향 tensor가 타원체를 잘 구성함을 알수 있었다. 또한 주어진 고분자의 결정 면들에 관계없이 고유한 중심축을 지니고 있음을 확인할수 있었다. 이를 통해 복잡한 배향 모드를 갖는 경우에 본연구에서 제안한 x-타원체를 통해 결정의 배향중심축을 효과적으로 찾을수 있음을 알수 있었다.
Journal of the Korean Crystal Growth and Crystal Technology
/
v.8
no.3
/
pp.468-473
/
1998
Sol-gel법을 이용하여 PbTiO3에 La을 10mol% 도핑한 박막을 bare Si(100)-wafer 위에 스핀 코팅법을 이용하여 제조하였다. 제조된 박막의 열처리 온도에 따른 결정화 거동을 살펴보고, 씨앗층(seeding layer)을 도입하여 박막의 미세구조 및 배향성을 SEM과 XRD로 관찰하였다. 씨앗층없이 일반적으로 제조된 박막의 경우는 우선 배향성을 나타내지 않았으나, 씨앗층을 도입한 경우에는 씨앗층의 두께 및 열처리 시간에 따라 막의 배향성이 달라졌다.
How the characteristics and stability of the rubbing-induced alignment of nematic liquid crystals (LCs) relate to the interfacial characteristics of LC-polyimide has been studied. The characteristics of the LC alignment (such as the LC texture, the pretilt angle, and the anchoring energy) and their thermal stability have been investigated for 5 polyimides synthesized for this work. The work showed that the rubbed polyimide alignment layer induces the strong LC anchoring and that the characteristics and stability of LC alignment are determined by the short-ranged interactions between LC and polyimide molecules at the alignment layer surface. The increased flexibility of the polyimide accelerates thermal imidization, increases the pretilt angle, and improves the alignment stability. It also turned out that fluorination of the polyimide tends to deteriorate the alignment uniformity and stability. No distinct differences in the alignment characteristics were shown for the aromatic- and alicyclic-dianhydride polyimides.
Proceedings of the Korean Vacuum Society Conference
/
2011.02a
/
pp.368-368
/
2011
최근에 보고된 양질의 고효율Cu(In,Ga)Se2 (CIGS) 태양전지는 CIGS광흡수층이 강한 (220:204) 우선배향성을 갖는 것으로 알려져 있다 [1]. 이러한 CIGS우선배향성은 Se 증착압력, Na농도, 기판온도 및 Mo후면전극의 표면상태에 영향을 받는 것으로 알려져 있지만 정확한 상호관계는 아직 명확히 알려져 있지 않으며, 특히 Mo후면전극의 영향에 대해서는 체계적인 연구결과조차 극히 드문 상황이다 [2]. 본 연구에서는 CIGS 박막의 우선배향성에 대해 Mo후면전극의 미세구조가 미치는 영향 및 이에 따른 cell특성의 변화에 대해서 연구하였다. Mo후면전극의 미세구조는 2 mTorr~16 mTorr까지 증착압력을 변화시켜 제어되었고, CIGS광흡수층은 이렇게 준비된 Mo후면전극상에 3단계 동시증밥법(3-stage process)을 사용하여 형성하였다. XRD를 통한 박막의 우선배향성 평가에서, Mo 증착압력에 대한 IGS I(300)/I(006) 및 CIGS I(220:204)/I(112)의 거동은 Mo 미세구조와 밀접한 관련이 있는 잔류응력(residual stress)의 변화 거동과 상당히 일치함을 보였다. 이에 반해, 높은 압력의 Mo위에 형성된 강한 (220:204) 우선배향성의 CIGS와 bare-glass위에서 형성된 강한 (112) 우선배향성의 CIGS내 Na농도는 서로 유사하였다. 상기의 결과는 Mo미세구조 그 자체가 CIGS 박막 우선배향성의 원인이 됨을 나타낸다. Selenized Mo시편의 XRD분석 및 IGS/Mo 시편의 TEM분석결과을 통해 MoSe2의 반응성이 잔류응력과 비례하는 Mo in-gain 밀도에 의존하는 함을 알 수 있었고, 이러한 MoSe2반응성(reactivity)과 IGS우선배향성 사이에 상당히 밀접한 관련이 있으며 이에 CIGS의 우선배향성이 결정됨을 확인하였다. 마지막으로, Mo변수에 의해 제작된 cell의 특성분석으로부터 cell의 효율이 주로 VOC의 증가에 기인하여 CIGS (220:204) 우선배향성의 정도에 비례하였다.
단섬유 보강 플라스틱 복합재료에 사출성형에서 섬유배향은 금형 충전 공정 중의 유동장에 의해 결정되고 섬유의 배향 상태는 역으로 유동장에 영향을 미친다. 단섬유에 의 한 추가적인 응력을 포함하는 Dinh과 Armstrong의 이방성 구성방정식을 충전유동과 섬유 배향의 연계해석에 도입하였다. 충전유동의 해석은 새로운 압력 지배방정식과 에너지 방정 식을 유한요소법과 유한차분법을 이용하여 풀고 동시에 2차 배향 텐서의 변화방정식을 4차 Runge-kutta 방법으로 풀었다. 섬유의 배향상태를 구한 후에 일방향성 복합재료의 Halpin-Tsai 식과 배향 평균모델을 도입하여 사풀성형품의 이방성 기계적 성질이 예측되었 다. 직사각형 캐비티에서 수치해석결과를 실험결과와 비교하였다. 섬유배향과 유동과의 상호 연계작용을 특히 게이트 근처에서 섬유배향에 영향을 미치며 수치해석 결과는 벽면 근처에 서 유동방향으로 배향하는 shell층을 과대 예측함을 알수 있었는데 이는 배향 텐서 변화 방 정식의 최종근사에서 기인하는 오차로 판단된다. 수정된 복합최종 근사를 바탕으로 예측된 이방성 기계적 성질이 기존의 복합최종 근사에 기초한 예측보다 실험 결과에 정량적으로 보 다 잘 일치하였다.
The effects of the type and thickness of underlayers on the crystallographic texture and the sheet resistance of aluminum thin films were studied. Sputtered Ti and Ti/TiN were examined as the underlayer of the aluminum films. The texture and the sheet resistance of the metal thin film stacks were investigated at various thicknesses of Ti or TiN, and the sheet resistance was measured after annealing at $400^{\circ}C$ in an nitrogen ambient. For the Ti underlayer, the minimum thickness to obtain excellent texture of aluminum <111> was 10nm, and the sheet resistance of the metal stack was greatly increased after annealing due to the interdiffusion and reaction of Al and Ti. TiN between Ti and Al could suppress the Al-Ti reaction, while it deteriorated the texture of the aluminum film. For the Ti/TiN underlayer, the minimum Ti thickness to obtain excellent texture of aluminum <111> was 20nm, and the minimum thickness of TiN to function as a diffusion barrier between Ti and Al was 20nm.
Nickel oxide (NiO) thin films were prepared on Si(100) substrates at room temperature by RF magnetron sputtering using a NiO target. The effects of oxygen flow ratio for the plasma gas on the preferred orientation and surface morphology of the NiO films were investigated. Highly crystalline NiO film with (100) orientation was obtained when it was deposited in pure Ar gas. For NiO film deposited in pure O$_2$ gas, on the other hand, the orientation of the film changed from (100) to (111) and its deposition rate decreased. The origin of the preferred orientation of the films was discussed. NiO films also showed different surface morphologies and roughnesses with the oxygen flow ratio.
Proceedings of the Korean Vacuum Society Conference
/
2011.02a
/
pp.78-78
/
2011
수열합성법을 이용하여 Si(111) 기판에 ZnO 박막을 성장하였다. ZnO 박막의 성장을 위한 씨앗층은 plasma-assisted molecular beam epitaxy (PA-MBE)를 이용하였다. 씨앗층의 표면 거칠기(root-mean-square roughness)는 2.5 nm이고, 씨앗층 위에 성장된 ZnO 박막은 다양한 크기의 입자들로 이루어져 있었으며 두께는 약 $1.8{\mu}m$로 매우 일정하였다. 배향성을 알아보기 위하여 texture coefficient (TC)를 계산해 보았다. TC(100)과 TC(200)은 a-축 배향성을, TC(002)는 c-축 배향성을 나타내는데, c-축으로 더 우세한 배향성(99.5%)을 보였다. TC 비율(TCa-axis/TCc-axis)은 열처리 온도를 $700^{\circ}C$까지 올렸을 때, 점차적으로 증가하였고, 그 이상의 열처리 온도(< $900^{\circ}C$)에서는 급격히 감소하였다. 잔류응력과 Zn와 O의 bond length도 유사한 경향을 보였다. $700^{\circ}C$까지 열처리 온도가 증가함에 따라, 잔류응력은 증가하였고 bond length는 감소하였다. Near-band-edge emission (NBE)의 피크 강도는 열처리 온도가 $700^{\circ}C$까지 증가함에 따라 점차적으로 증가하였다. 열처리 온도가 $800^{\circ}C$ 이상 증가함에 따라 deep-level emission (DLE)가 적색편이(red-shift)하였다. $700^{\circ}C$로 열처리를 한 ZnO 박막이 가장 우세한 (002)방향의 배향성을 보였을 뿐만 아니라 가장 큰 발광효율 증가를 보였다.
Kim, Jong-Geun;Lee, In-Gyu;Yun, Ju-Heon;Yun, Gwan-Hui;Park, Jong-Geuk;Kim, Won-Mok;Baek, Yeong-Jun;Jeong, Jeung-Hyeon
Proceedings of the Korean Vacuum Society Conference
/
2011.02a
/
pp.370-370
/
2011
I-III-IV2족의 Cu(In,Ga)Se2 (CIGS) 박막 태양전지는 3단계(three-stage) 동시증발공정을 통하여 약 19.9%의 최고의 효율을 보유하고 있다. 3단계 공정에 있어 IV2족 Se의 증발 속도 또는 증착압력은 우선 배향성 제어 및 표면 미세구조 영향 등에 큰 영향을 미치는 것으로 알려져 있다. 본 연구에서는 CIGS 박막 합성을 위한 3단계 공정에서 각 단계별 Se 분압의 변화를 주어, 각 공정 단계에서 Se 분압의 변화가 CIGS 박막의 미세구조 및 셀 효율에 미치는 영향을 분석하였다. 3단계 공정에서 Cu, In, Ga 분압은 고정시키고, Se 분압의 크기 순서대로 1, 2, 3으로 변화시켜 CIGS 박막을 제조하였다. 이 박막의 미세구조, 특히, 우선 배향성, 표면의 기공, 결정성을 제어 하기 위하여 3단계 공정에서 1st stage 이후 Se 분압을 증가시키는 방법($3{\rightarrow}1$, $2{\rightarrow}1$)과 1st stage 이 후 Se 분압을 감소시키는 방법($1{\rightarrow}3$, $1{\rightarrow}2$)을 적용하여 비교하였다. 그 결과 3단계에서 1st stage 이후 Se 분압을 증가시킴으로써 (220)/(204)의 우선 배향성을 촉진시키며, 결정성을 개선하였고, 1st stage 이후 Se 분압을 감소시킴으로써 CIGS 박막 표면의 기공을 제거하고, 결정성을 향상시켰다. 이렇게 1st stage이 후 Se 분압을 증가시킴으로써 (220)/(204)의 우선 배향성의 촉진과 결정성 개선은 단락 전류(Jsc)를 증가시켰으며, 1st stage 이후 Se 분압을 감소시킴으로써 CIGS 박막 표면의 기공을 제거와 결정성 개선은 개방전압(Voc)의 증가효과를 가져왔다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.