• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.12
• /
• pp.819-828
• /
• 2022

Sensitivity of aircraft sizing depending on battery performance was studied for a generic quad tilt rotor type electric vertical takeoff and landing vehicle. The mission requirements proposed by Uber Elevate and NASA were used for initial sizing, and the calculated gross weight is ranged between 5,000lb and 11,000lb for battery specific energy range of 200-400Wh/kg in pack level and continuous discharge rate range of 4-5C. For the assumed gross weight of 7,000lb, the required battery performance was calculated with two different criteria: available power and energy, and the effects of battery specific energy and discharge rate are analyzed. The maximum discharge rate is also recommended considering failure cases such as one battery pack inoperative and one prop rotor inoperative.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.9
• /
• pp.723-734
• /
• 2018

A structural weight estimation methodology for the multicopter design process is presented. In general, a multicopter is composed of an airframe, motors, propellers, battery and so on. Among these, the weight of motors, propellers and battery can be obtained from the weight trends with respect to design parameters. However, the structural weight is hard to be estimated due to the various configurations and design concepts of multicopters. Moreover, the airframe weights of most commercial multicopter products are not provided. Thus, an accurate airframe weight model is required for the reliable mutlcopter design process. Firstly, the standard configuration of multicopters is defined. Then, we proposed the structural weight estimation method using the number and diameter of propellers determined from the initial step of sizing process. Finally, we validated our suggested method using the commerical products.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.19 no.6
• /
• pp.113-118
• /
• 2011

Fuel Cell Hybrid Vehicle (FCHV) is one of the most promising candidates for the next generation of transportation. It has many outstanding advantages such as higher energy efficiency and much lower emissions than internal combustion engine vehicles. It also has the ability of recovering braking energy. In order to design an FCHV drive train, we need to determine the size of the electric motor, the Fuel Cell System (FCS), and the battery. In this paper, the methodology for the sizing of these components is introduced based on the driveability constraints of the FCHV. A power management strategy is also presented because the battery energy capacity depends on it. The warm-up time of the FCS is also considered in the power management strategy and the simulation result is compared to that without considering the warm-up time.