• Journal of the Korean Applied Science and Technology
• /
• v.33 no.3
• /
• pp.529-539
• /
• 2016

Modeling can be used to understand the atmospheric dispersion of air pollutants scientifically. Recent development of model computation enabled to simulate more diverse area. As flowing out from the emission source, the concentration profiles of air pollutants could be estimated in three dimensional space. This study used CALPUFF diffusion model to predict the diffusion of discharged NO2 and TSP on the atmosphere near a combined heat power plant and incinerator. It was investigated contribution concentration of the surrounding area by sources by comparing the actual measurement results and the results of the modeling. Contribution of emission sources to the local level of NO2 was found quite high particularly at the site, A-3. The estimated results by modelling revealed more significant effect on TSP at A-5.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.1
• /
• pp.45-51
• /
• 2015

In order to meet the enforced emission regulations and reduce fuel consumption, various new technologies are employed in engines. The problem of NOx emissions under a lean mixture condition should be solved, because a lean-burn direct-injection engine can realize stable lean combustion with a stratified mixture, which results in improvements in fuel economy and emissions. This study investigated the effects of intake and exhaust valve timing changes on the performance and emission characteristics of a lean-burn LPG direct-injection engine. Under a partial-load operating condition without throttling, an increase in the intake valve opening led to an increase in NOx emissions due to an increase in the amount of excess air. The fuel consumption deteriorated with an increase in the exhaust valve opening due to a decrease in the expansion work and an increase in the pumping loss.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.3
• /
• pp.335-342
• /
• 2012

Nowadays, automobile manufacturers are focusing on the reduction of exhaust-gas emissions because of the harmful effects on humans and the environment, such as global warming by greenhouse gases. Gasoline direct injection (GDI) combustion is a promising technology that can improve fuel economy significantly compared to conventional port fuel injection (PFI) gasoline engines. In the present study, ultra-lean combustion with an excess air ratio of over 2.0 is realized with a spray-guided-type GDI combustion system, so that the fuel consumption is improved by about 13%. The level of exhaust-gas emissions and the operation performance with the multiple injection strategy and exhaust-gas recirculation (EGR) are examined in comparison with the emission regulations and from the point of view of commercialization.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.6
• /
• pp.639-647
• /
• 2014

Due to global warming and depletion of fossil fuels, technologies reducing $CO_2$ emission and increasing fuel efficiency simultaneously are required. An exhaust gas heat recovery system is a technology to satisfy both issues. This study analyses three types of heat exchanger installed on an exhaust pipe. In case of plate type heat exchanger, back pressure rapidly increased and maximum cylinder pressure reduced in high speed and maximum load, and back pressure increased over twice and specific fuel consumption also increased up to 2% which were the highest increasing rate. In case of fin tube type, the amounts of exhaust emissions and specific fuel consumption rate were less than the other two types. The effect of shell and tube was in the middle. Making a decision by only the effect on engine performance, a fin tube type is the best for exhaust heat recovery systems.

• Journal of the korean Society of Automotive Engineers
• /
• v.21 no.4
• /
• pp.20-32
• /
• 1999

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.396-396
• /
• 2023

기후 위기에 대한 대응으로 현재 많은 국가에서 2050년 탄소중립을 목표로 하고 있으며, 우리나라도 2050년까지 탄소중립을 선언하고 다양한 부문의 배출 절감 계획을 내세웠다. 현재 건물 부문에서는 2050년의 목표배출량을 6.2 백만톤 CO2eq으로 설정하고 관련 정책적 수단을 검토 중이지만 달성 방안 등에 대해서는 구체적으로 제시하지 못하고 있다. 본 연구에서는 국내 건물 부문의 이산화탄소의 배출량 산정 모델을 개발하여, 2050년까지 이산화탄소 배출 저감 시나리오를 시뮬레이션하였다. 이를 토대로 국내의 건물 부문 탄소중립 가능성을 검토한 통합 시나리오를 제시하고, 향후 정책 및 기술 개발의 방향성을 제시한다. 탄소배출량 산정모델은 연면적 예측 및 사용 에너지의 원단위 환산, 탄소배출계수 등을 고려해 개발하였고, 이를 활용하여 4가지 탄소배출 시나리오를 분석하였다. 먼저 현재 정책 기반 탄소 배출 시나리오는 탄소중립에 이르지 못하여 더 강화된 시나리오의 필요성을 보여준다. 신규 건물을 대상으로 한 제로 에너지화 제도 기반 시나리오는 전체 탄소배출량에 큰 기여를 하지 못하며, 기존 건물 대상의 그린 리모델링 제도 기반 시나리오에서는 10년 이상 건물에 50% 이상의 높은 에너지 효율 개선을 시행해야 한다는 결과를 도출하였다. 또한 전기화 시나리오에서는 화석연료와 전력의 탄소배출계수를 비교하여 적절한 에너지 전환 시점을 계산하였다. 그 결과, 건물 부문에서 2050년까지 탄소배출량 감축 목표 달성을 위해 신축 건물의 에너지 자립율 100%, 에너지 전환 계획과 연동한 건물의 전기화, 그리고 그린리모델링을 통한 효율 개선 기준을 47% 이상 달성하는 조건을 만족해야 한다는 결과를 얻었다. 이 연구는 도전적인 온실가스 감축 마련의 필요성을 제시하였으며, 탄소중립 가능성을 제시하여 실질적인 감축정책에 기여할 것으로 기대한다.

• 한국상하수도협회지
• /
• s.16
• /
• pp.128-135
• /
• 2006

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.5
• /
• pp.503-508
• /
• 2012

Recently green house gas emission problem has been issued because $CO_2$ emission is known to cause global warming. Hence, introduces more stringent emission and fuel economy requirements in various countries, including Korea. In this research, $CO_2$ emission factor characteristics of in-use cars, which are the most dominant vehicle type in Korea, were studied, and 129 gasoline vehicles, 100 diesel vehicles, and 34 LPG vehicles were tested on a chassis dynamometer. In the tests, CO and $CO_2$ emissions as well as fuel reduction rates weremeasured. The tests were conducted in the CVS-75 mode, which has been considered for developing emission factors for regulating emissions from light-duty vehicles in Korea. Through experiments, correlations among displacement, fuel consumption efficiency, fuel type, mileage, driving pattern, and $CO_2$ emission were investigated.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.9 no.4
• /
• pp.187-192
• /
• 2006

In order to know the biological effect of effluent from shipyard and the adjacent stream water on four organisms (flatfish, rockfish, sea squirt and arkshell) cultured around the shipyard, lethal rate and DNA damage were measured after 48 hr exposure and carried out by a single cell gel electrophoresis, namely comet assay. $LC_{50}$ (48 hr) could not be calculated in any organism 48 hours after exposure to effluent from shipyard and stream water, because all organism showed a lethal rate lower than 20%. Regardless of no acute toxicity, DNA damage of flatfish and rockfish was detected higher in Jang-Pyoung stream than in control, whereas sea squirt revealed higher DNA damage in laundry waste water. From these results, Jang-Pyoung stream seemed to have a relatively higher genotoxicity rather than effluent from shipyard.

• Journal of the Korean Society of Radiology
• /
• v.9 no.6
• /
• pp.357-362
• /
• 2015

This study was to evaluate the usefulness through the comparison of patients group and healthy control group by acquiring a variety of functional parameters index from time-activity curves of salivary gland scan using 99mTc-pertechnetate. From December 2014 to February 2015, had the targets of 30 patients with dry mouth and 10 people in healthy control group underwent the salivary gland scan. After intravenous injection of 370 MBq of 99mTc-pertechnetate, Vitamin C powder stimulation was administerd orally at 20 min and then 10 minutes were taken scan. The method of quantitative analysis was as follows, the time-activity curve was drawn after the parotid gland and submandible gland were prescribed as a region of interest, a variety of function parameters index was obtained in each position of the curve, and the patients group and the control group were compared. As for the methods applied in comparison and measurement, uptake ratio (UR), time at maximum counts (Tmax), time at minimum counts (Tmin), maximum accumulation (MA), accumulation velocity, maximum secretion (MS), maximum stimulation secretion (MSS), and secretion velocity (SV) were used. In the comparison of functional parameters index of patient group and normal group, the healthy normal group showed significant difference compared to the patient group in all indices except for the minimum radioactivity time (Tmin), and also in terms of variation over time the normal group showed significant difference compared to the patient group (p<0.05). Consequently, it was considered that the quantitative analysis that used a variety of function parameters index would be useful for evaluating the function of the salivary glands of the patients with dry mouth as an objective and standardized information.