• Korean Chemical Engineering Research
• /
• v.55 no.2
• /
• pp.170-179
• /
• 2017

We investigated design requirements of feed water drain and hydrogen vent systems for the sodium-water reaction pressure relief system (SWRPRS) of the prototype generation IV sodium cooled fast reactor (PGSFR). We evaluated the areas of the gas vent pipe of the water dump tank and the length of the water drain pipe of the steam generator to rapid drain of the water steam inside the steam generator for the normal and refueling operations, respectively. We also calculated the diameter of the gas vent pipe of the sodium dump tank which met its design pressure.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.516-516
• /
• 2017

기후변화로 인하여, 홍수, 사막화, 엘니뇨 등의 자연재해가 이전보다 더 발생하고 있다. 기후변화 적응은 전 세계적으로 기후변화 대응보다 중요해지고 있다. 기후변화 적응을 위한 이슈 중 하나가 물 순환이다. 각 국가에서는 물 순환을 활성화하기 위한 기술을 개발하고 있다. 특히, 저영향개발(LID, Low Impact Development)이라는 물을 확보하기 위한 정책이 각 국가별로 추진되고 있으며, 이에 따른 기술이 개발되고 있다. 국내에서도 2001년에 국토해양부는 수자원장기종합계획을 발표하고, 환경부에서는 2013년에 LID기술요소 가이드라인과 환경영향평가 시 적용 가능한 저영향개발 매뉴얼을 개발하는 등 LID기술을 개발하고 적용하기 위한 정책을 펼치고 있다. 이러한 LID기술 중 하나가 빗물 집수시스템이며, 이 빗물집수시스템은 주거지역에서 빗물을 배수하고, 집수하여 빗물을 이용하기 위해 적용되고 있다. 현재 적용되고 있는 빗물 집수시스템은 측구 집수시스템과 원형 집수시스템이 있으며, 최근에는 수로형 집수시스템이 적용되는 지역도 있다. 본 연구에서는 전과정 평가(LCA, Life Cycle Assessment)를 이용하여 빗물 집수시스템의 환경성을 평가하고자 한다. 현재, 국내에서는 녹색건축물인증, 탄소성적 표지인증, 환경성적 표지인증 등 LCA를 이용하여 환경성을 평가하고 있다. 특히, 본 연구에서는 기후변화 측면에서 LCA를 적용하여 이산화탄소배출량을 평가하고자 하였다. 본 연구의 범위는 빗물집수시스템 30m로 가정하였으며, 측구 집수시스템, 원형 집수시스템 및 수로형 집수시스템의 건설, 운영 및 유지관리, 해체 및 폐기단계의 전 과정이다. 각 빗물 집수시스템에 대해 각 단계별로 이산화탄소 배출량을 산정한 결과, 수로형 집수시스템은 $2.82\;ton\;CO_2\;eq./set$이며, 원형 집수시스템은 $27.65\;ton\;CO_2\;eq./set$, 측구 집수시스템은 $21.54\;ton\;CO_2\;eq./set$이 배출되었다. 이산화탄소배출량 측면에서는 수로형 집수시스템이 나머지 두집수시스템보다 87~90%가 저감되는 것으로 나타났다. 본 연구는 저영향개발에 대응하는 동시에 기후변화를 대응한다는 측면에서 빗물 집수시스템 정책에 활용되고, 설계시에도 반영될 수 있을 것으로 사료된다. 추가적으로 이산화탄소뿐 만 아니라, 다른 환경성을 평가하는 연구가 진행될 필요가 있다.

• Korean Chemical Engineering Research
• /
• v.57 no.1
• /
• pp.28-41
• /
• 2019

We carried out performance analysis of Sodium-Water Reaction Pressure Relief System of Prototype Generation-IV Sodium-Cooled Fast Reactor. We analyzed transient-dynamic behavior of fluids inside the steam generator to vent into a sodium dump tank or a water dump tank when tubes in the steam generator were broken to cause a large-water-leak accident. Accordingly, we preliminarily evaluated design requirements of our system. Our results showed that sodium in the shell side of the steam generator and in Intermediate Heat Transport System was completely vented within 50 s and feed water in the tube side of the steam generator was completely vented within 2.5 s. It was analyzed that pressure of the tube side of the steam generator was higher than pressure of the shell side of the steam generator, which showed that sodium in the shell side did not flow into the tube side. Our results are expected to be used as basis information to performance analysis of Sodium-Water Reaction Pressure Relief System of Prototype Generation-IV Sodium-Cooled Fast Reactor.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.30 no.4
• /
• pp.131-139
• /
• 2022

The aim of this study was to assess the feasibility of a landfill project to reduce greenhouse gas (GHG) from La Chureca Landfill in Managua, Nicaragua ("Project"). The feasibility study involved surveying the status and composition of waste on its way in to the landfill and projecting GHG emissions from the landfill. A projection of the GHG emissions with the IPCC model based on the survey results indicated the period 2006 to 2043 would see mean yearly GHG emissions of 290,147 ton-CO₂/year with model certainty not considered, and 217,610 ton-CO₂/year with model certainty considered. Thus, the result exceeded the corresponding median and mean values of other CDM projects implemented in Central America, even after model uncertainty was considered together with the conservative estimation of carbon capture efficiency. The similar result was produced even with an analysis of sensitivity to error factors. All the findings of the study are expected to be applicable as basic data for deciding about whether & how to proceed with the Project.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.2
• /
• pp.65-72
• /
• 2004

A melamine-urea-formaldehyde (MUF) resin, based on 5 percent melamine addition of the resin solids weight, was synthesized in the laboratory for particleboard (PB) manufacture. Laboratory PBs were made with the MUF resin at three press times (3, 4, 5 min) and two resin application rates (6, 8 percent). Enclosed caul system was used for collecting the exhaust gases materials generated during the hot-pressing of PBs. Exhaust gases materials generated inside the enclosed caul during the hot-pressing of PBs were collected in a controlled air stream. Formaldehyde from the exhaust gases collected was determined per a chromotropic method of the National Institute of Occupational Safety and Health Method 3500. The measurement results showed that formaldehyde emissions during the hot-pressing of PB significantly increased with increasing press time, and MUF resin application rates. PB' performance test results showed that internal bond (IB) of PB made with 3-minute press time exceeded the minimum requirement for KS F 3104 PB type 8.0.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.360-360
• /
• 2019

도시화 및 산업화로 인해 불투수면이 지속적으로 증가하고 있으며, 불투수면 증가로 인해 유역의 물순환 구조가 왜곡되고, 비점오염 배출량이 증가하는 등의 문제가 야기되고 있다. 왜곡된 물순환 체계 회복 및 비점오염 배출 저감 등을 위해 중장기 물순환 개선 목표 수립과 관련된 조항이 물환경보전법 상에 추가되어 2020년 시행예정이며, 광주, 대전, 울산, 안동, 김해시 등은 물순환 선도도시로 선정되어 관리되고 있는 등 물순환 개선을 위한 노력이 높아지고 있다. 본 연구에서는 경안천 중권역을 대상으로 HSPF (Hydrological Simulation Program - FORTRAN) 모형을 이용하여 유출량을 모의하여, 소권역별로 물순환요소를 도출하고, 물순환율을 산정 하고자 한다. 모형의 구동을 위한 기상자료는 기상청으로부터 취득하였으며, 지형자료는 환경부의 소권역도, 국토지리정보원의 수치지형도를 활용하였고, 토지피복도는 국가공간정보포털에서 취득한 연속지적도를 토지피복 분류에 따라 재분류하여 구축하였다. 모형의 보정을 위한 유량자료는 환경부 유량측정망과 수위관측소의 유량자료를 활용하였으며, 2013~2017년은 보정, 2008~2012년은 검정기간으로 활용하였다. 도출된 수문모의 결과를 활용하여 2008년부터 2017년까지 소권역별로 매년 물순환율을 산정하고 비교하였다. 본 연구의 결과는 추후 물순환 현황파악을 위한 기초자료로 활용될 수 있을 것으로 사료된다.

• Prospectives of Industrial Chemistry
• /
• v.24 no.1
• /
• pp.14-24
• /
• 2021

최근 전 세계적으로 이산화탄소를 포함한 대기 오염원의 배출을 줄이고 화석연료를 대체할 수 있는 차세대 청정에너지원으로 '수소'를 주목하고 있다. 하지만 현재까지 사회에 유통되는 대부분의 수소는 화석연료 개질을 기반으로 생산되기 때문에 2차 환경오염의 위험을 가지고 있다. 이에 이산화탄소 배출이 없이 태양에너지로부터 물을 분해해 수소를 생산하는 광전기화학 수소 생산 기술이 주목받고 있다. 단 광전기화학 물분해 수소생산을 실현하기 위해서는 수소를 충분히 생산시킬 수 있는 충분한 전류밀도, 과전압을 최소화하는 높은 개시전위, 및 그 생산비용을 최소화 할 수 있는 저렴한 공정 등을 동시에 만족시킬 수 있는 광전극 소재 개발이 필요하다. 최근 광소자용 소재로 각광을 받는 유기금속 할라이드 페로브스카이트 소재가 상기의 조건들을 상당히 만족할 것으로 기대되고 있어 광전기화학 물분해 셀로 적용되는 연구들이 수행되고 있다. 본 기고문에서는 유기금속 할라이드 페로브스카이트 소재기반 광전기화학 물분해 관련 최신 연구동향과 전망을 다루고자 한다.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.10
• /
• pp.701-708
• /
• 2011

In this study, the emissions of GHG from general ships were calculated by Tier1 method based on the fuel consumption, and by Tier3 method based on the activities data such as power and SFOC of each engine, sailing characteristics (e.g. time and load factor, etc.) considering the ship type. In 2009, the emissions of GHG by Tier1 and Tier3 method were appeared 28.27 mega-ton $CO_{2eq}$ and 30.81 mega-ton $CO_{2eq}$. The emissions by Tier3 were slightly more than those by Tier1. We found that the values of the sailing characteristics for surveyed data are overestimated slightly. In the near future, more detailed researches for sailing characteristics considering ship types would be needed for sailing, anchoring, and berthing condition, etc.

• Korean Chemical Engineering Research
• /
• v.58 no.4
• /
• pp.588-595
• /
• 2020

Prediction and control of nitrogen oxides (NO_x) emission is of great interest in industry due to stricter environmental regulations. Herein, we propose an artificial intelligence (AI)-based framework for prediction of NO_x emission. The framework includes pre-processing of data for training of neural networks and evaluation of the AI-based models. In this work, Long-Short-Term Memory (LSTM), one of the recurrent neural networks, was adopted to reflect the time series characteristics of NO_x emissions. A decision tree was used to determine a time window of LSTM prior to training of the network. The neural network was trained with operational data from a heating furnace. The optimal model was obtained by optimizing hyper-parameters. The LSTM model provided a reliable prediction of NO_x emission for both training and test data, showing an accuracy of 93% or more. The application of the proposed AI-based framework will provide new opportunities for predicting the emission of various air pollutants with time series characteristics.

• Journal of Environmental Impact Assessment
• /
• v.24 no.6
• /
• pp.549-560
• /
• 2015

The priorities of siting restriction was derived from quantification of environmental hazard according to industrial classification based on 'Chemical Ranking and Scoring System(CRS)' which is handling the discharge characteristics of 31 industrial classifications regulated from locating at 'Industrial Complex in Rural Area(ICRA)'. CRS that is utilizing the data of 'Pollutant Release and Transfer Registers(PRTR)' is applied to determine human health risk and ecological risk which are calculated by discharged amount and materials $LC_{50}$ according to water, soil and air media based on industrial classification. From this process, exposure assessment and toxicity assessment for integrating the adverse environmental impact and the mitigation effect of environmental risk according to the development of environmental technologies into establishing the rational landuse management method for the 31 industrial classifications regulated from locating at ICRA was analyzed. From the assessment result of the siting restriction removal at ICRA for 31 industrial classifications, based on 2012 year reference 6 industries that includes Manufacture of Guilt Coloration Surface Processing Steel Materials, Manufacture of Biological Product, Manufacture of Smelting Refining and Alloys of Copper, Dyeing and Finishing of Fibers and Yarns, Manufacture of Other Basic Iron and Steel n.e.c., Rolling Drawing and Extruding of Non-ferrous Metals n.e.c. are calculated as having relatively lower environmental hazards, thus it is judged that the siting restriction mitigation at ICRA is possible for the 6 industrial classifications that are not discharging the specific hazardous water contaminants during manufacturing process.