• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.2
• /
• pp.196-203
• /
• 2015

In order to apply cylindrical periodic array to phased array antenna or frequency selective surface, efficient electromagnetic analysis is required. Finite periodic array is applied in real situation. But, generally, assumed that periodic structure is arranged infinitely, approximate electromagnetic characteristics can be obtained efficiently. But, difference of characteristics between real structure and approximate structure occurs because finite periodic array is approximated to infinite periodic array. Therefore, comparison and analysis of cylindrical infinite array and finite array are required. In this paper, cylindrical infinite periodic array are analyzed using cylindrical Floquet harmonics. Also, cylindrical finite periodic array is analyzed using method of moments (MoM) with thin wire approximation because periodic structures which are composed of strip with narrow width are analyzed. Transmission characteristics and surface currents of infinite and finite periodic structures are compared.

• Proceedings of the Korea Contents Association Conference
• /
• 2013.05a
• /
• pp.29-30
• /
• 2013

차세대 전자 소자용 전송 선로로 사용될 수 있는 나노 원기둥 배열의 분산 관계 특성을 모드 정합법을 사용하여 계산하였다. 서로 떨어진 나노 원기둥 배열에도 배열이 놓인 방향으로 전자파 모드가 형성되는 것을 수치 해석 결과로 제시한다. 또한 나노 원기둥 배열에 생기는 전기장의 분포 특성도 제시한다.

• Journal of Sensor Science and Technology
• /
• v.12 no.2
• /
• pp.79-87
• /
• 2003

In this paper, we propose a method to obtain a linear characteristic using soft computing for systems which have array sensors of nonlinear characteristics. Also a procedure utilizing the pattern information of array sensors without additional sensors is proposed to reduce disturbance effects. For a typical example, even a single CdS cell for CdS array has nonlinear characteristics. Overall linear characteristic for CdS array is obtained using fuzzy logic for each cell and overlapped portion. In addition, further improvement for linearization is obtained applying genetic algorithms for the parameters of membership functions. Also the effect of disturbing external light changes to the CdS array can be reduced without using any additional sensors for calibration. The proposed method based on fuzzy logic shows improvements for position measurements and disturbance reduction to external light changes due to the fuzziness of the shadow boundary as well as the inherent nonlinearity of the CdS array. This improvement is shown by applying the proposed method to the ball position measurements of a magnetic levitation system.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.12
• /
• pp.44-51
• /
• 2009

The radiation characteristics of a pin array patch antenna phased array are compared to those of a conventional patch antenna phased array. The performance of a pin array patch antenna phased array is much improved than that of a conventional patch antenna phased array because the mutual coupling between the adjacent pin array patch antennas is very small compared to that between the adjacent conventional patch antennas. The radiation characteristics of a pin array patch antenna phased array show the superior performance such as low variation of the gain of the main beam and the side lobe level for the variation of the direction of the main beam.

• Journal of the Korea Society of Computer and Information
• /
• v.6 no.1
• /
• pp.51-59
• /
• 2001

In this paper, performance of the double circular array antenna was analyzed, which has sharp directivity with specific direction and is compatible to shape pencil beam. The character of each array geometry which N numbers of isotropic point source is arranged in planar with type of a square, circular and double circular was compared and analyzed. As a result, we fined that double circular geometry was good performance rather than square and circular array geometry in the point of directivity. SLL and HPBW.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.5 no.2
• /
• pp.46-54
• /
• 1994

In this paper, an analysis and design method is proposed, which is to improve the directivity of microstrip array antennas conformed to a cylindrical surface. In the case of forming an arc-array in the circumferential direction on a circula-cylinder surface, the circular-cylinder can be approximated to a polygonal-pillar and on each pillar-planes the sub-arrays, Dolph-Tschebyscheff array and uniform array with a beam steered in the desired direction, would make a sharp directivity for the total cylin- drical array antenna. And the radiation pattern according to the type of its sub arrays is analyzed and compared using the cylindrical-cavity codel. A cylindrical microstrip array antenna, with 12 elements and uniform arra as a sub-array which have an equal distance$\lambda_0$/2between the elements, is manufactured and conformed to a cylinder with radius of 6 The measured data of side lobe level, HPBW and FNBW are - 13dB, $9^{\circ}$, and $15{\circ}$, ,respectively. This result shows a good improvement on the directivity comparing with a linear array.

• The Journal of the Acoustical Society of Korea
• /
• v.33 no.4
• /
• pp.238-247
• /
• 2014

In this paper, rail vibration and its sound radiation are investigated, then the rail noise measurement by using microphone array is explored theoretically. A concrete slab track for domestic high speed trains is modeled as a Timoshenko beam on elastic support, regarding the moving of the excitation force on the rail. From the radiation characteristics of rail noise generated by a line source, the effect of moving load on sound radiation is obtained. Also it is found that the beam angle of the microphone array is a prominent factor to measure the rail noise level reliably because the rail noise propagates as a plane wave. In this investigation, a proper beam angle for the rail noise measurement by microphone array is suggested.

• Journal of the Korea Society of Computer and Information
• /
• v.8 no.1
• /
• pp.90-96
• /
• 2003

In this paper, arranged the isotropic point source of N number with the structure which is identical with the receive area. And against the array structure which has the radiation pattern which is identical with the receive area it researched. The arranged the element space flees grating lobe and in order to set the characteristic of optimum with half-wave equally space it selects. After inducing the array factor of each array structure, it calculated a radiation pattern. As a result of, the radiation pattern of the each Planar array antenna with structure of the receive area was similar and the possibility of getting an beam characteristic it was.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.945-947
• /
• 2005

변압기, 케이블, 한류기와 같은 고온초전도 선재의 전력기기의 개발과 응용에 있어서 교류손실은 기기의 운용과 효율에 밀접한 관계가 있기 때문에 중요한 연구 분야가 되고 있다. 또한 현재 전력기기에 응용 하고 있는 고온초전도 선재는 전력기기에 필요한 통전용량을 수용 할 수 없기 때문에 이를 해결하기 위한 방법으로 선재를 적층하여 통전용량을 증대시키는 다양한 방법이 연구되고 있다. 본 논문에서는 고온초전도 선재의 적층배열을 달리 하였을 때, 외부자계에 의한 고온초전도 선재의 자화손실 특성에 대해서 연구하였다. 선재의 적층 배열의 형상은 Edge-to-Edge, Face-to-Face형과 Matrix형이며, 적층배열에 사용한 선재의 개수는 2, 4, 8개이다. 연구결과, 동일한 적층 수의 조건하에서 Face-to-Face형의 적층배열이 다른 종류의 배열보다 자화손실이 낮음을 확인하였고, 이는 Face-to-Face 형태로 적층 될 때 인접선재로 인한 자기차폐효과가 다른 배열의 경우보다 우수하기 때문으로 보인다.

• The Journal of the Acoustical Society of Korea
• /
• v.29 no.7
• /
• pp.431-438
• /
• 2010

The radiation pattern of conformal transducers installed on a curved surface is likely to be complicated depending on the array pattern on the curved surface. In this research, the acoustic sources constituting a conformal transducer are arrayed in equi-angle, equi-interval, and geodesic dome forms, and the radiation pattern function of each of the array geometries has been derived, and therewith the radiation pattern has been analyzed for each array geometry. Based on the analysis result, we have determined the equi-interval array geometry that provides the widest beam width with the lowest side lobe level among the three array geometries. Results of the present work are expected to be utilized to the design of conformal transducer structures.