• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.10
• /
• pp.1848-1853
• /
• 2006

In this paper, we propose a method to reconstruct resolution-improved 3D images computationally based on lenslet array model in integral imaging technique and analyze its performance. While conventional view-point reconstruction method has low resolution based on pinhole array model, the proposed method can obtain resolution-improved 3D images because of extracting multiple pixels from elemental images by use of lenslet way model. To show the usefulness of proposed method, we perform computational experiments and present its results.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06e
• /
• pp.151-154
• /
• 1998

이 논문에서 비선형 배열 MUSIC 빔형성 기법을 이용하여 예인형 선배열 센서 시스템의 표적 좌우 방위 분리 방법을 기술하였다. 이 기법은 배열 운동모델 Water-Pully 모델과 방향센서의 정보를 이용하는 칼만필터를 설계하여 예인함 기동에 따른 배열형상을 추정하고 표적의 좌우방위를 분리하기 위하여 추정된 배열형상에서 MUSIC 빔형성 기법으로 신호처리를 수행하였다. 또한 예인주기와 예인진폭과 같은 예인함 기동형태의 전형적인 빔형성 기법과 MUSIC 빔형성 기법으로 표적의 좌우 방위 분리 성능을 비교 분석하였다.

• Journal of Convergence for Information Technology
• /
• v.10 no.7
• /
• pp.138-146
• /
• 2020

The paper deals with comparative study of characteristics of surrogate models and sensitivity evaluation using design of experiments in order to enhance and analysis the structure design of an automatic salt collector under various design load conditions. Orthogonal array design based on numerical analysis was used for the design of experiments. The thickness sizing variables of main structure member were considered the design factors, and the output responses were selected from the strength performances as well as the weight. The quantitative effects on responses for each design factor were evaluated from the orthogonal array experiment. Optimum design case was also identified to improve the strength performances with weight minimization. Using the orthogonal array experiment. various surrogate models such as response surface model, Kriging model, and Chebyshev orthogonal polynomial were generated. The orthogonal array experiment results were validated by the surrogate modeling results. The most suitable surrogate model was the response surface model for the exploration of design space of the automatic salt collector.

• The Journal of the Acoustical Society of Korea
• /
• v.35 no.6
• /
• pp.427-435
• /
• 2016

Array Gain (AG) is a metric to measure the performance of an array of acoustic sensors. AG is affected by the configuration of array, frequency and array element spacing, and the directivity of the ambient noise. In this paper, an algorithm to calculate AG based on the spatial coherence is used, and the results are verified through sea-going experiment. The method using the spatial coherence can be used to consider the arbitrary shape of an array and directionality of ambient noise. In the sea-going experiment, the towed source was used to transmit the Continuous Wave (CW), and was received at the horizontal line array on the seabed. The ambient noise was measured between the source transmission. The experimental AG was calculated from the SNR (Signal to Noise Ratio) of single sensor and an array of sensors. Finally, the predicted AG is shown to agree with the experimental value of AG.

• Journal of KIISE:Computer Systems and Theory
• /
• v.27 no.11
• /
• pp.881-889
• /
• 2000

프로그램의 실행시간은 캐쉬메모리의 효율적 사용과 밀접한 관계가 있다. 특히 간섭 실패는 프로그램의 성능에 큰 영향을 미치지만 나타나는 형태가 불규칙적이므로 예측하기가 매우 어렵다. 본 논문에서는 직접 사상 캐쉬전략을 사용한 완전 중첩 루프 내 배열의 캐쉬 실패율(cache miss ratio)을 구하는 분석적 모델을 제시한다. 논문에서 제시한 모델을 임의의 캐쉬 위치에 각 배열이 접근한 시간을 기반으로 다음주기에서 캐쉬 실패의 발생 여부를 예측하는데, 간섭으로 발생한 캐쉬 실패 개수에 대해 기존에 제시된 모델보다 더 빠르고 정확한 예측이 가능하다. 특히, 한문장의 수행시간 예측시간은 배열의 크기와 독립적이기 때문에, 전체 프로그램의 수행시간 예측은 배열의 크기 및 문장의 반복 회수 배만큼 빠른 결과를 보여준다. 본 모델은 프로그램의 성능예측 뿐만 아니라 데이터 지역성의 최적화, 캐쉬 구성, 스케쥴링 등에서도 이용 가능하다.

• Journal of the Korea Convergence Society
• /
• v.12 no.3
• /
• pp.187-196
• /
• 2021

The paper deals with comparative study for characteristics of approximation of design space according to various approximate models and sensitivity analysis using orthogonal array experiments in structure design of active type DSF which was developed for float-over installation of offshore plant. This study aims to propose the orthogonal array experiments based design methodology which is able to efficiently explore an optimum design case and to generate the accurate approximate model. Thickness sizes of main structure member were applied to the design factors, and output responses were considered structure weight and strength performances. Quantitative effects on the output responses for each design factor were evaluated using the orthogonal array experiment. Best design case was also identified to improve the structure design with weight minimization. From the orthogonal array experiment results, various approximate models such as response surface model, Kriging model, Chebyshev orthogonal polynomial model, and radial basis function based neural network model were generated. The experiment results from orthogonal array method were validated by the approximate modeling results. It was found that the radial basis function based neural network model among the approximate models was able to approximate the design space of the active type DSF with the highest accuracy.

• Journal of the Korean Society of Industry Convergence
• /
• v.3 no.1
• /
• pp.53-59
• /
• 2000

단섬유 보강 복합재료의 종횡비(aspect ratio)를 변화시키며 기계적 특성(탄성계수, 인장강도)을 평가하였다. 2차원 다중 파이버(multi-fiber) 모델을 이용하여 엇갈린(staggered) 배열과 규칙적(aligned) 배열에 대해 유한요소 해석을 하였다. 단섬유 복합재료의 유효탄성계수 및 인장강도는 섬유와 기지의 탄성계수비, 섬유 배열상태, 그리고 단섬유 종횡비의 함수로 표현되었으며, 해석결과의 탄성계수와 인장강도는 이론 모델의 결과와 사출 성형된 PEEK 복합재료 시험편의 결과와 비교하였다. 시험결과는 낮은 종횡비에서 이론 모델 결과와 일치함을 보였다. 단섬유 보강 복합재료의 배열 및 종횡비 변화에 따른 섬유보강 효과에 따른 계면응력 상태는 기계적 특성 결정에 중요한 영향을 보였다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.5
• /
• pp.507-517
• /
• 2010

The KOREAN AIR - R&D Center has developed a solar array for STSAT-2 Flight Model, SaTReC-KAIST, using a fully localized technology and has verified the performance through a launch vibration test, orbit environment test and electrical performance test. The solar array will be launched at NARO Space Center by KSLV-I which is the first Korean launch vehicle, in May 2010. In this paper, a current-voltage curve that shows the power characteristics of solar arrays was derived by applying elements that affects the power performance of STSAT-2's solar arrays to the solar cell equivalent models. The result was compared to LAPSS test results, and accuracy of the solar cell equivalent model and the power performance simulation has been analyzed.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.6
• /
• pp.664-670
• /
• 2014

Generally, the properties of metamaterials are analyzed based on the infinite array of the unit cells. In real application of the metamaterial, however, the array has to be finite. Hence, it is important that a method can analyze the effect of the finite array of the metamaterial. In this paper, a model is proposed which can calculate the scattering by a large-size finite array of an I-shaped metamaterial without a full-wave simulation. The proposed model is based on the surface current estimation of each unit cells. The ratio of the current distribution on a finite array of the metamaterial to that of the infinite array of the same metamaterial for a TM polarized incident wave is approximated as a quartic polynomial. The coefficients of the polynomial are a function of the physical dimension of the metallic patch. Hence, the current distribution of the finite metamaterial can be estimated based on the proposed polynomial and the current of the infinite array. The scattered field is calculated by using the surface current model. The proposed model is numerically and experimentally verified by comparing calculated and measured RCS(Radar Cross Section) data.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.36 no.3
• /
• pp.176-182
• /
• 2020

Purpose: To evaluate the effects of load direction, number of implants, and alignment of implant position on stress distribution in implant, prosthesis, and bone tissue. Materials and Methods: Four 3D models were made to simulate posterior mandible bone block: two implants and 3-unit fixed dental prosthesis (FDP) with a pontic in the center (model M1), two implants and 3-unit FDP with a cantilever pontic at one end (model M2), FDP supported by three implants with straight line placement (model M3) and FDP supported by three implants with staggered implant configuration (model M4). The applied force was 120 N axially or 120 N obliquely. Results: Peak von Mises stresses caused by oblique occlusal force were 3.4 to 5.1 times higher in the implant and 3.5 to 8.3 times higher in the alveolar bone than those stresses caused by axial occlusal force. In model M2, the connector area of the distal cantilever in the prosthesis generated the highest von Mises stresses among all models. With the design of a large number of implants, low stresses were generated. When three implants were placed, there were no significant differences in the magnitude of stress between staggered arrangement and straight arrangement. Conclusion: The effect of staggering alignment on implant stress was negligible. However, the number of implants had a significant effect on stress magnitude.