• Journal of Energy Engineering
• /
• v.24 no.3
• /
• pp.109-114
• /
• 2015

Heat exchanger tube array in a heat recovery steam generator is exposed to the hot exhaust gas flow and it could cause the flow induced vibration, which could damage the heat exchanger tube array. It is needed for the structural safe operation of the heat exchanger to establish the characteristics of flow induced vibration in the tube array. The researches for the flow induced vibration of typical heat exchangers have been conducted and the nondimensional PSD(Power Spectral Density) function with the Strouhal number, fD/U, had been derived by experimental method. The present study examined the results of the previous experimental researches for the nondimensional PSD characteristics by CFD analysis and the basis for the application of flow induced vibration to the heat recovery steam generator tube array would be prepared from the present CFD analysis. For the previous mentioned purpose, the present CFD analysis introduced a single circular cylinder and calculated with the unsteady laminar flow over the cylinder. The characteristics of vortex shedding and lift fluctuation over the cylinder was investigated. The derived nondimensional PSD was compared with the results of the previous experimental researches and the characteristics of lift PSD over a single circular cylinder was established from the present CFD study.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.2
• /
• pp.712-718
• /
• 2016

A heat exchanger tube array in a heat recovery steam generator is exposed to hot exhaust gas flow that can cause flow induced vibrations, which could damage the heat exchanger tube array. The characteristics of flow induced vibration in the tube array need to be established for the structural safe operation of a heat exchanger. Several studies of the flow induced vibrations of typical heat exchangers have been conducted and the nondimensional PSD (Power Spectral Density) function with the Strouhal number, fD/U, had been derived using an experimental method. The present study examined the results of the previous experimental research on the nondimensional PSD characteristics by CFD analysis and the basis for the application of flow induced vibration to the heat recovery steam generator tube array was determined from the present CFD analysis. The present CFD analysis introduced circular cylinder tube array and calculated using unsteady laminar flow for the tube array. The characteristics of lift and drag fluctuations over the cylinder tube array was investigated. The derived nondimensional lift and drag PSD was compared with the results of the previous experimental research and the characteristics of lift and drag PSD for a circular cylinder tube array was established from the present CFD study.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.10
• /
• pp.6641-6646
• /
• 2015

Heat exchanger tube array in a heat recovery steam generator is exposed to the hot exhaust gas flow and it could cause the flow induced vibration, which could damage the heat exchanger tube array. It is needed to establish the characteristics of flow induced vibration in the tube array for the structural safe operation of the heat exchanger. Several researches for the flow induced vibration of typical heat exchangers had been conducted and the nondimensional PSD(Power Spectral Density) function with the Strouhal number, fD/U, had been derived by experimental method. The present study examined the results of the previous experimental researches for the nondimensional PSD characteristics by CFD analysis and the basis for the application of flow induced vibration to the heat recovery steam generator tube array would be prepared from the present CFD analysis. For the previous mentioned purpose, the present CFD analysis introduced circular cylinder tube array and calculated with the unsteady laminar flow for the tube array. The characteristics of lift fluctuation over the cylinder tube array was investigated. The derived nondimensional PSD was compared with the results of the previous experimental researches and the characteristics of lift PSD for circular cylinder tube array was established from the present CFD study.

• Proceedings of the SAREK Conference
• /
• 2007.06a
• /
• pp.200-200
• /
• 2007

• JOURNAL OF ELECTRICAL WORLD
• /
• s.410
• /
• pp.48-53
• /
• 2011

발전 및 플랜트 분야의 '청정 산소탱크' 두산중공업. 명장(明匠)은 명품(名品)을 낳고, 이렇게 만들어진 두중의 명품은 지구와 인류의 가치를 드높이고 있다. 발전과 Water사업 분야의 다양한 명품들을 제작해 내고 있는 두중 창원공장. 최첨단 친환경 고효율 발전기술을 보유한 두중은 국내에서 가동 중인 20기의 원전 중 16기에 주기기 공급, HRGS(배열회수보일러) 세계시장 점유율 1위, 자타공인 해수담수화 분야 세계 넘버 원 기업이다. 또한 지난 20년간 세계에서 가장 많은 원전 주기기 공급뿐만 아니라 중국 최초의 3G 원전인 산먼, 하이양 원전 수주, 미국에서 발주된 6기의 AP1000 주기기 전량을 수주하는 기록을 달성하기도 했다. 여기에 더해 최근 두산중공업은 풍력발전 등 신재생에너지 분야와 CCS 등 친환경발전 분야의 기술 상용화부문에서도 가속도를 내고 있다. 일관성과 원칙을 중시하는 박지원 사장의 진두지휘 하에 '경쟁우위의 지속'을 지향하는 두중의 글로벌 가치제고 노력은 여전히 현재 진행형이고, 미래지향적이다.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.1692-1697
• /
• 2004

The once-through heat recovery steam generator is ideally matched to very high temperature and pressure, well into the supercritical range. Moreover this type of boiler is structurally simpler than drum type boiler. In drum type boiler, each tube play a well-defined role: water preheating, vaporization, superheating. Empirical equations are available to predict the average heat transfer coefficient for each regime. For once-through heat recovery steam generator, this is no more the case and mathematical models have to be adapted to account for the disappearance of drum type economizer, boiler, superheater. General equations have to be used for each tube of boiler, and actual heat transfer condition in each tube has to be identified.

• 한국태양에너지학회:학술대회논문집
• /
• 2008.11a
• /
• pp.273-279
• /
• 2008

The purpose of this study is not only to evaluate thermal performance but also to find the stress behavior of heat transfer tubes under the part load operation in Heat Recovery Steam Generator. Flow analysis was performed to know the behavior of exhaust gas from gas turbine and thermal performance was calculated using distribution of hot exhaust velocity. In addition, tubes temperature during operation were gathered from actual plant to verify the uneven flow distribution under part load operation. Stress analysis was performed using tubes temperature data gathered from actual plant under both part and full load operations to know the stress behavior of tubes.

• JOURNAL OF ELECTRICAL WORLD
• /
• s.272
• /
• pp.81-85
• /
• 1999

코제너레이션이란 Co(공동의)와 Generation(발생한다)의 복합어로 이것을 시스템업한 것을 코제너레이션 시스템이라한다. 코제너레이션 시스템은 전기와 열을 동시에 생산하는데서 열(熱)병합 발전시스템이라고도 하며, 종래 대기 가운데 방출되고 있던 엔진배열(排熱)을 회수하여 발전함과 동시에 이것을 활용하여 종합에너지효율을 75$\%$전후로까지 높이는 시스템이다. 배열 이용으로 보일러 운전시간을 단축시켜 연료소비량을 줄일 수 있게 되어 이산화탄소($CO_2$)를 삭감할 수 있는 외에, 연료를 연소시킴으로써 발생하는 질소산화물($NO_x$)에 대해서도 그 저감기술이 여러 가지 개발되고 있어 국가에서 정한 기준치 이하로 억제할 수 있게 되었다. $CO_2$에 대해서는 지구 온난화방지 교토회의에서 1990년 대비 6$\%$삭감에 합의가 이루어졌으며, 이것을 해결할 수 있는 에너지효율화 환경기기로서 코제너레이션 시스템은 이제부터 보급이 가속화될 것으로 생각된다.

• Journal of Energy Engineering
• /
• v.13 no.3
• /
• pp.173-180
• /
• 2004

A technique of the heat rate allocation was devised to monitor the performance of Combined Cycle Power Plant. This calculates the expected heat rate of current conditions and compares it with actual values. Loss allocation in heat rate is reconciled by calculating the magnitude of the deficiency contributed by major components, such as the gas turbine, heat recovery steam generator (HRSG), steam turbine and condenser. Expected power output is determined by a detailed model and correction curves of the plant.

• Proceedings of the SAREK Conference
• /
• 2008.11a
• /
• pp.345-350
• /
• 2008

The present study has been conducted to develop a heat recovery system for a 1 MW class gas engine based cogeneration system. In the cogeneration system, heat is recovered from two parts, which are jacket water and exhaust gas. The heat from the jacket water is recovered by a plate type heat exchanger and used for the room heating and/or hot water supply. The heat from the exhaust gas is used to generate steam. For both of the heat recovery devices, 1/5 scaled tests are performed and the data are compared to the conventional correlations for the design.