• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.7
• /
• pp.685-692
• /
• 2016

A cutting head is an attachment on the front of an excavator that cuts or grinds rocks. Cutting tools, called pick cutters, are arranged on the surface of the cutting head. The exact arrangement and configuration of pick cutters is one of the most important factors in determining grinding efficiency. This study focuses on the problem of automation for pick arrangement design, in order to make the design process more efficient and convenient. Design automation was carried out using RecurDyn/ProcessNet, and it was composed of three parts: 'Drum set', 'Pick load', and 'Pick arrangement' sections. The presented method helps to decrease costs attributed to designing cutting heads and can be used to generate a wide range of attachment mechanisms.

• Communications for Statistical Applications and Methods
• /
• v.15 no.2
• /
• pp.235-244
• /
• 2008

Balanced arrays which are generalized orthogonal arrays, introduced by Chakravarti (1956) can be used to construct the fractional factorial designs. Especially for 2-level factorials, balanced arrays with strength 4 are identical to the resolution-V fractional designs. In this paper criteria for evaluation the degree of the orthogonality of balanced arrays of 2-levels with strength 4 are developed and some application methods of the suggested criteria are discussed. As a result, in this paper, we introduce the constructing methods of near orthogonal saturated balanced resolution-V fractional 2-level factorial designs.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.2
• /
• pp.111-118
• /
• 2003

Notch Antenna is a travelling wave type antenna and can provide multioctave operation in phased arrays that scan over wide angle. In this paper, we designed a wideband E-plane phased array antenna using E-plane waveguide simulator which has a bandwidth of 3 : 1 and a scan volume of $\pm$45$^{\circ}$ in E-plane. We compared impedance of single antenna and infinite array antenna using equivalent circuit modeling. We analyzed full structure of 1$\times$9 phased array antenna and we evaluated active reflection coefficient with variation of beam scan angle through mutual coupling coefficient acquired from simulation and investigated the variation of antenna gain with variation of active element pattern as beam scan angle is varied.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.3
• /
• pp.410-424
• /
• 1993

In this paper, we present new techniques for designing systolic arrya and asynchronous arrays for digital-signal processings. More specifically, we propose a systolic array with simple local interconnections which achieves optimal performance without having undesirable features such as preloading input data or global broadcasting. As asynchronous array for digital-signal processings, which can speed up the total computation time significantly is also which can speed up the total computation time significantly is also presented. The key component of the asynchronous array is a presented. The key component of the asynchronous array is a comunicaiton protocol which controls input data flow properly and efficiently. Finally, performance of the arrays is analyzed and a simulation using Occam programmed in a Transputer network is reported.

• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.167-168
• /
• 2008

인공위성에서 궤도 변경에 사용되는 추진계를 제외한 인공위성 본체와 탑재체의 모든 기능은 전기에너지를 이용하여 임무를 수행한다. 이러한 전기에너지가 태양전지 배열기에 의해 생성되는 만큼, 태양전지 배열기의 설계는 인공위성 개발에서 매우 중요하다. 인공위성을 위한 태양전지 배열기는 발사시의 충격과 우주환경에서의 방사능에 대한 노출을 직접적으로 받으므로 견고하게 제작되어야 하며, 인공위성의 수명 말기까지 위성 운용을 위한 충분한 전력을 생산하도록 설계되어야 한다. 본 논문에서는 저궤도 인공위성을 위한 태양전지 배열기의 제작 및 설계에 관하여 기술한다.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.373-374
• /
• 2007

지중배전관로공사 설계시 고려할 사항은 지중배전관로 공수산정, 적정관로 선정, 매설위치 및 매설깊이, 관재의 선정, 관로의 경간, 관로배열 등이 고려되어야 한다. 관로공사비는 굴착깊이와 굴착폭에 의해 산정되고 이는 관로배열, 굴착지반의 토질에 따른 굴착구배, 용수여부, 도로관리기관의 조례, 다짐정도, 작업환경, 작업시간 등에 의해 변화하게 된다. 이런 현장조건 들은 설계자가 바꿀 수 없는 요소이지만 관로배열을 어떤 형태로 하여 매설할지는 설계자가 정하여야 한다. 본 연구에서는 경제적인 관로배열을 선정하기 위해 관로공수별, 관로유형별 공사비를 산출하여 비교 검토하였고 현장에서의 공사시공성, 케이블의 허용전류 등을 종합적으로 고려하여 최적의 관로배열을 제시하였다.

• The Journal of the Acoustical Society of Korea
• /
• v.39 no.3
• /
• pp.170-178
• /
• 2020

Cymbal transducers are often used as an array rather than single because they have a high quality factor and low energy conversion efficiency. When used as an array, there occurs a big change in the frequency characteristics of the array due to the interaction between constituent transducers. In this study, we designed the structure of a cymbal transducer array to have ultra-wideband characteristics using this property. First, cymbal transducers with specific center frequencies were designed. Then, a 2×2 planar array was constructed with the designed transducers, where the cymbal transducers were arranged to have same or opposite polarization directions. For this structure, we analyzed the effect of the difference in the center frequency of and the spacing between the constituent transducers on the acoustical characteristics of the array. Based on the analysis, we designed the structure of the cymbal transducer array to have the widest possible bandwidth.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.10A
• /
• pp.988-995
• /
• 2006

In this Paper, we Present a nonharmonic may geometry design method using Euclidan minimum distance function in difference Phase spaces for 2-D (azimuth/elevation) multiple baseline antenna may which has a way to reduce the number of sensor antennas while maintaining accurate DOA estimate. The major advantages of our approach is that even the shortest interelement spacing can be larger than half-wavelength and is not limit13d to linear and it can be applied successfully to any array configuration. In multiple signals impinging situation, the performance simulation results of superresolution algorithms shows the effectiveness of the proposed method. Also the 2-D asymmetric may using the Proposed method is designed and the Performance of the manufactured away through the experimental test is verified.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.12
• /
• pp.1351-1358
• /
• 2012

In this paper, an analytical technique is proposed for the design of interleaved thinned planar array with well-behaved and predictable sidelobes. The interleaved arrays are composed of thinned planar subarrays based on cyclic difference sets(DSs). Becauce sidelobes of thinned planar subarrays based on DS are predictable by DS parameters, the subarrays exhibit very similar sidelobe levels by utilizing DS and complementary DS with similar autocorrelations each other. The combinatorial method also allows the design of interleaved placements with simultaneously optimum peak sidelobe levels(PSLs) of subarrays using cyclic shift-a property of DSs. The optimized PSLs of the interleaved array are -12.47 dB and -10.34 dB.

• Journal of Convergence for Information Technology
• /
• v.10 no.7
• /
• pp.138-146
• /
• 2020

The paper deals with comparative study of characteristics of surrogate models and sensitivity evaluation using design of experiments in order to enhance and analysis the structure design of an automatic salt collector under various design load conditions. Orthogonal array design based on numerical analysis was used for the design of experiments. The thickness sizing variables of main structure member were considered the design factors, and the output responses were selected from the strength performances as well as the weight. The quantitative effects on responses for each design factor were evaluated from the orthogonal array experiment. Optimum design case was also identified to improve the strength performances with weight minimization. Using the orthogonal array experiment. various surrogate models such as response surface model, Kriging model, and Chebyshev orthogonal polynomial were generated. The orthogonal array experiment results were validated by the surrogate modeling results. The most suitable surrogate model was the response surface model for the exploration of design space of the automatic salt collector.