• Title/Summary/Keyword: 배면광원

Search Result 9, Processing Time 0.03 seconds

Electro-Optical Characterization of Hg-Free Fluorescent Lamps for LCD Backlight (LCD 배면광원용 무수은 형광램프의 전기.광학적 특성)

  • Lee, Soon-Seok;Lim, Sung-Kyoo
    • The Journal of the Korea Contents Association
    • /
    • v.6 no.12
    • /
    • pp.163-168
    • /
    • 2006
  • Hg-free fluorescent lamps were fabricated and electro-optical characterization were measured for using LCD backlight. PDP phosphors, nitro-cellulose and n-butyl acetate were mixed and coated uniformly in glass tube without stain. The glass tubes were sintered at $550^{\circ}C$ for 20 minutes, vacuumed to $10^{-6}$ torr and supplied discharge gas by using a gas mixture. After various experiment about phosphors thickness and inner diameter of glass tube, the appropriate phosphors thickness and inner diameter of glass tube were obtained. The luminance and luminous efficiency of manufactured fluorescent lamps with Ne+Xe discharge gas were $6,270cd/m^2$, 13 lm/W under 75 kHz sinusoidal wave voltage, respectively.

  • PDF

A study of Luminescence effects of POF-woven Fabric Display by Method of Weaving (직물화 방식에 따른 유연 광섬유 직물 디스플레이의 광원 색채별 발광효과에 관한 연구)

  • Yang, Jin-Hee;Park, Sun-Hyung;Cho, Hyun-Seung;Lee, Joo-Hyeon
    • Science of Emotion and Sensibility
    • /
    • v.16 no.4
    • /
    • pp.517-526
    • /
    • 2013
  • This paper reports on flexible plastic optical fiber (POF) fabric displays which are used to develop light-emitting clothing from photonic fabric. We first evaluated the luminescence value corresponding to different methods of processing flexible optical fibers, types of reflective fabric structure, and colors of the light. Moreover, we tried to identify the optimum conditions of the flexible POF fabric displays to realize high luminescence value. The processing methods that were compared were the "Pre-etching" method and the "Post-etching" method. On the basis of the reflective structure of the fabric, the fabrics were categorized as the "White fabric" and the "Reflective fabric." Analysis results showed that the effect of the processing method is more dominant than that of the types of reflective fabric structure. Further, the capability of the Post-etching method to increase luminescence value is slightly higher than that of the Pre-etching method. Further, the 'Reflective fabric' is slightly more efficacious as the base fabric to increase the luminescence value, than the White fabric is. Thus, optimum increase in luminance can be realized by employing the Post-etching method and the Reflective fabric as the base fabric.

Reflective TLAFLCD Mode for High Contrast Ratio and High Reflectance (고대비비와 높은 반사율을 위한 반사형 TLAFLCD mode 설계)

  • 안선모;전철규;문성오;강진우;윤태훈;김재창
    • Proceedings of the Optical Society of Korea Conference
    • /
    • 2003.02a
    • /
    • pp.114-115
    • /
    • 2003
  • LCD(Liquid Crystal Display)는 현재 정보 디스플레이 소자들 중 부피가 작고, 소비전력이 작으며, 비발광체로서 눈의 부담을 줄일 수 있는 장점을 가지고 있으나, 화면 표시 속도가 느려 잔상이 남는 단점이 있다. 이러한 단점을 개선하기 위해서는 응답속도가 빠른 액정이 요구된다. 반사형 LCD는 배면조명이 없어 가볍고, 주변 광원을 이용하여 저 소비전력의 장점을 가지고 있어 휴대성이 강조되고 있는 최근 정보통신기기들의 추세에 적합하다. (중략)

  • PDF

Electro-Optic Characteristics of a Reflective Antiferroelectric Liquid Crystal Display (반사형 반강유전성 액정 표시장치의 전기광학 특성)

  • 김성철;박원상;진현석;이기동;윤태훈;김재창
    • Proceedings of the Optical Society of Korea Conference
    • /
    • 2000.02a
    • /
    • pp.112-113
    • /
    • 2000
  • 주변의 광원을 이용하는 단일 편광판 반사형 액정 표시장치는 전력 소모의 70%이상을 차지하는 배면조명이 필요 없으므로 가볍고 얇으며, 소비전력이 적고, 큰 반사효율을 얻을 수 있는 장점으로 인해 큰 주목을 받고 있다. 현재 단일 편광판 반사형 액정 표시장치는 reflective TN(RTN)$^{(1)}$ 과 mixed-mode TN(MTN)$^{(2)}$ 과 같은 TN액정 모드를 기본적으로 사용하고 있다. 하지만 TN액정 모드를 사용한 반사형 액정 표시장치는 좁은 시야각과 느린 응답 특성 등의 문제점이 있다. 이러한 문제점들을 해결하기 위해 reflective-optically compensated bend(R-OCB)$^{(3)}$ 및 reflective homeotropic TN mode$^{(4)}$ , 반사형 BTN$^{(5)}$ 등을 이용한 반사형 액정 표시장치 등이 보고된 바 있다. (중략)

  • PDF

Inorganic Electro-luminescence Device Fabricated with $BaTiO_3$-PVDF Composite Film ($BaTiO_3$-PVDF 복합체로 제작한 무기 EL 소자)

  • Son, Yong-Ho;Jeong, Joon-Seok;Jo, Chan-Woo;Woo, Duck-Hyun;Kim, Young-Min;Kim, Sung-Jin;Yoon, Man-Soon;Ryu, Sung-Lim;Kweon, Soon-Yong
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2007.06a
    • /
    • pp.299-299
    • /
    • 2007
  • 후막형 무기 EL (electro-luminescence) 소자는 제조공정이 간단하고, 얇고, 가볍고, 유연한 동의 많은 장점들 때문에 휴대폰의 키패드 (key-pad) 및 광고용 back-light용으로 사용되고 있다. 이 무기 EL 소자는 비교적 손쉬운 스크린 프린팅 (screen-printing) 법으로 대면적을 제작할 수 있지만, LED (light emitting diode) 등과 비교하여 밝기가 낮아서 그 응용 분야가 제한되고 있다. EL 소자의 형광층은 전면 전극과 후면 전극 사이에 위치한다. EL은 이 형광층에 고 전기장이 걸릴 때, 전기장에 의해 가속된 전자가 형광층 내부에 첨가된 발광 중심의 전자를 여기시키고, 여기된 전자가 다시 바닥상태로 완화될 때 빛이 방출되는 현상이다. 즉, EL 소자는 이러한 전자 발광 현상을 이용한 소자로서, 전압 인가 시 발광 면 전체가 균일하게 발팡하는 평면 광원이다. 이러한 EL 소자에서 휘도의 증가는 후면 전극과 형광층 사이에 삽입되는 유전체 층의 특성과 밀접한 연관성이 있다. 본 연구에서는 고휘도 무기 EL 소자를 제작하기 위하여 이 유전체 층의 특성과 소자의 성능 사이의 관계를 알아보고자 하였다. 유전체 층에 사용하기 위해서 $BaTiO_3$-PVDF (polyvinylidene fluoride)의 복합체 필름을 제조하였다. 먼저 이 복합체 필름을 스크린 프린팅 (screen printing) 법으로 코팅하기 위한 페이스트 제작을 위해서, PVDF 수지를 용제에 녹였다. 그 다음, 일반 혼합기 및 삼단 롤밀 혼합기 (3-roll milling mixer) 등을 이용하여 $BaTiO_3$ 분말과 PVDF 용액을 다양한 비율로 혼합하여 페이스트를 제조하였다. ITO가 증착된 PET Film에 스크린 프린팅 법을 사용하여 형광층, 유전층, 배면 전극 등을 차례로 코팅하였다. $BaTiO_3$ (BT) 분말과 복합체 필름의 XRD 분석 결과, 분말 시료와 복합체 시료 모두 페로브스카이트 구조의 BT 회절선만 관찰되었다. 복합체의 단면 SEM 관찰에서는, BT 분말의 무게비가 증가할수록 더 치밀한 구조를 보여줌을 확인하였다. 또 EL소자의 유전상수와 휘도도 BT 분말의 혼합비가 증가할수록 증가하였다. 본 연구에서 제작한 무기 EL 소자의 최대 휘도는 약 $130\;cd/m^2$ 정도로 측정되었는데, 이는 휴대폰 키패드의 back-light용 광원으로 사용하기 충분하다고 판단되어진다.

  • PDF

무기물 형광체를 사용한 고효율 순백색 유기발광소자의 전기적 성질과 광학적 성질

  • An, Seong-Dae;Jeong, Hwan-Seok;Chu, Dong-Cheol;Kim, Tae-Hwan;Lee, Jun-Yeop;Park, Jeong-Hyeon;Gwon, Myeong-Seok
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2010.02a
    • /
    • pp.427-427
    • /
    • 2010
  • 전색 디스플레이의 배경조명과 일반조명으로 응용 가능한 백색 유기발광소자를 제작하기 위해서는 삼원색을 혼합하는 방법과 단색광원의 색변환을 이용하는 방법등이 제안되었다. 삼원색을 혼합하는 방법의 연구가 접근방법 및 효율개선이 용이하기 때문에 많은 연구가 진행되어왔다. 그러나 색변환 방법을 사용하는 구조는 삼원색을 혼합하는 방법에 비해 공정이 단순하며 공정 가격이 낮아지고 안정적인 구조라는 장점이 있기에, 본 연구에서는 무기물 형광체를 청색유기발광 소자에 결합하여 제작된 백색 유기발광소자의 전기적 성질과 광학적 성질을 규명하는 연구를 진행하였다. 본 연구에서는 나노크기의 균일한 형광체를 제작 할 수 있는 졸겔 방법으로 적색 형광체를 제작하였다. 졸겔 방법으로 제작된 형광체에 대한 주사현미경 측정 결과 입자의 표면이 고르며 크기가 작고 균일 하였고, 높은 온도 열처리에 따라서 용매제가 대부분 제거되었기 때문에 형광체 발광 특성이 잘 일어났음을 확인 할 수 있었다. 제작된 형광체의 광학적 성질을 조사하기 위해 형광 루미네센스 측정을 하여 발광특성을 분석하였으며 실제 청색 유기발광소자에 적용하기 위해 tris((3,5-difluoro-4-cyanophenyl)pyridine)iridium (FCNIr)-doped 3,5-bis (N-carbazolyl) benzene (mCP)를 발광층으로 사용하는 진청색의 인광 유기발광소자 배면에 무기물 형광체를 결합하여 인가한 전압에 따른 전계발광분광특성의 변화를 조사하였다. 유기발광소자와 결합된 적색 무기물 형광체는 진청색 인광 유기발광소자에서 발광된 청색빛의 일부를 흡수하여 적색으로 색변환을 하였고 이는 무기물 형광체내에 첨가된 Mn 원자에 의해 색변환이 이루어졌음을 확인하였다. 무기물 형광체를 사용한 백색 유기발광소자의 색변환 메카니즘 및 효율 증진에 대한 연구는 고효율 유기발광소자 제작을 가능하게 할 것이다.

  • PDF

A Study on the Development of Pattern Design Tool for CCFL Backlight (CCFL 백라이트 패턴 설계툴 개발에 관한 연구)

  • Cho Young-Chang;Choi Byung-Jin;Yoon Jeong-Oh
    • Journal of Korea Society of Industrial Information Systems
    • /
    • v.11 no.2
    • /
    • pp.79-85
    • /
    • 2006
  • As the portable information appliance is developed, the demand of flat panel display equipments and parts are steeply increased. Most of all, the applications of LCD such as LCD TV, monitor, digital camera, CNS(car navigation system) and game machine become diversified. With the result that the number of BLU production enterprise is increased and the research on the design of backlight with the superior optical properties is persistently in progress. In this study we developed the pattern design tools for CCFL(cold cathode flourescent lamp) backlight to improve the conventional pattern design environment in which the pattern is designed manually from the experience and the trial and error. For the verification of our research, we designed the light reflection surface patterns for a real model of backlight and we measured the brightness uniformity using the BM-7. From the brightness uniformity measurement, the BLU designed using the presented tool showed the tolerable performance only in the first try of pattern design rather than the fifth try of pattern design in case of the conventional pattern design.

  • PDF

Interferometric Color Display Using Micromechanically Coupled Digital Mirror Arrays (기계적으로 연동된 디지털 미소거울을 이용한 광간섭형 컬러 디스플레이 구현)

  • Han, Won;Cho, Young-Ho
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.36 no.5
    • /
    • pp.487-493
    • /
    • 2012
  • We present interferometric modulators that reproduce RGB colors through the selective actuation of mechanically coupled mirror arrays having identical air gaps. The conventional transmittive interferometric modulators need additional backlights, which leads to high power consumption. The previous reflective interferometric modulators using ambient lights need three different air gaps for reproducing the three RGB colors, thus giving rise to process complexity. For process simplicity, we propose the use of reflective interferometric modulators that are capable of producing green, blue, red, and black colors with the aid of mechanically coupled mirrors with identical air gaps. In an experimental study, the present interferometric modulators reproduce green, blue, and red colors at the switching modes (000), (010), and (101). The spectrum peaks for the colors are measured at the wavelengths $511{\pm}5nm$, $478{\pm}3nm$, and $644{\pm}9nm$, respectively, with the bandwidths being $60{\pm}1nm$, $45{\pm}2nm$, and $105{\pm}4nm$, respectively; further, the maximum intensities of the colors are $77{\pm}5%$, $73{\pm}2%$, and $81{\pm}5%$, respectively. The black spectrum is measured below the intensity of $27{\pm}0%$. Thus, we experimentally demonstrate the color reproduction capability of interferometric modulators fabricated by using a simple process.