• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.11 no.3
• /
• pp.110-116
• /
• 2002

Here are shown on stress and vibration evaluations and application of piping system in petrochemical plant with and actual example. While stress evaluation by thermal growth has no argument on the calculated results, vibrational evaluations have some different results in accordance with the evaluation methods. In case of the static stress evaluation the ASME B3l.3 code defines 7000 cycles of fatigue lift: in operating the piping system with a design condition. However, the method of vibrational evaluation on piping systems in petrochemical plants has not been established clearly, yet. In this stuffy, it is purposed to present the requirement of a vibrational evaluation method for petrochemical plant piping system, with an actual application.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.10a
• /
• pp.480-485
• /
• 2011

In this study, the seismic analysis of power plant piping system was performed using finite element model. This study was performed by ANSYS 12.1. For qualification of power plant piping system, the response spectrum analysis was performed using the given operating basis earthquake(OBE) and safe shutdown earthquake(SSE) floor response spectrum. The maximum stresses of power plant piping system were 166 MPa under OBE condition and 281 MPa under SSE condition. Thus, it can shown that the structural integrity of tpower plant piping system has a stable structure for seismic load conditions.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.26 no.2
• /
• pp.91-96
• /
• 2014

An acoustical model for detecting the leak location in a buried gas pipeline has been developed. This model is divided into an experimental model for sound diagnosis, and a theoretical model for sound prediction, which is based on the transfer matrix method, representing the sound pressure and the volume velocity as state variables. The power spectrum is measured by attaching only one microphone to the closed end pipe. It has been shown that the response magnitude of acoustic pressure signals calculated by the acoustical model depends upon the thickness and diameter of a pinhole. The validity for the acoustical model has been verified through a comparison between the measured and calculated results.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2190-2192
• /
• 2001

가스 배관 진단 시스템은 배관 내부에 삽입되어 배관 내에 주입된 가스에 의해 추진되는 시스템으로 배관의 건설, 유지, 보수, 해체 등의 작업을 위한 여러 정보를 수집한다. 배관 진단을 위한 대표적인 센서로는 배관 내부의 찌그러짐(dent)과 주름(wrinkle)의 형태 및 크기를 측정하는 캘리퍼(caliper) 센서와 배관 외부의 파손을 측정하는 MFL(Magnetic Flus Leakage) 센서 그리고 배관 내의 환경 정보를 측정하기 위한 온도 센서와 압력 센서가 있다. 이러한 센서들로 수집된 정보를 활용하기 위해서는 정확한 위치 정보가 필요하므로 IMU(Inertial Measurement Unit)와 주행 거리계를 사용하는 결합 항법 시스템도 필요하다. 본 논문에서는 가스 배관 진단 시스템을 위한 항법 데이터 저장 시스템을 개발한다. 배관 진단 시스템의 특성상 일반적인 측정 센서는 700Hz 이상의 주기로 측정되고 항법 정보는 100Hz 주기 이상으로 측정되며 배관 내 이동 시간은 2시간에서 24시간 이상으로 다양하므로 많은 데이터를 효율적으로 저장할 수 있어야 한다. 따라서 데이터 저장 장치로는 DAT를 사용하게 되며 많은 센서 데이터를 실시간으로 저장하기 위해서 마스터-슬레이브 구조를 갖는 멀티 프로세서 구성을 이용한 항법 데이터 저장 시스템을 설계 제작하였다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2010.10a
• /
• pp.158-159
• /
• 2010

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.04a
• /
• pp.49-60
• /
• 2011

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.10a
• /
• pp.711-712
• /
• 2012

• Proceedings of the Korean Nuclear Society Conference
• /
• 1999.10a
• /
• pp.270-270
• /
• 1999

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.11a
• /
• pp.122-126
• /
• 2006

Two types of pressurization system and low weight feeding piping system are developed. With sub-system tests, ullage pressure control performance was verified for 1 step and 2 step pressurization system and the feeding performance of feeding piping system was also verified. The weight of the feeding piping system is low enough for the application of launch vehicle. In addition, LOX conditioning system is developed for avoiding geysering and LOX temperature rise. Integrated performance was verified through integrated on-board feeding system performance tests.

• Journal of the Society of Disaster Information
• /
• v.18 no.3
• /
• pp.550-559
• /
• 2022

Purpose: Pipes are widely used as applied devices in many industrial fields such as machinery, electronics, electricity, and plants, and are also widely used in safety-related fields such as firefighting and chemistry. With the diversification of products, the importance of technology in the piping field is also increasing. In particular, when changing the existing copper pipe to stainless steel, it is necessary to evaluate safety and flow characteristics through structural analysis or flow analysis. Method: This study investigated the safety by flow analysis of the 6.35 inch socket model, which are integrated insert type connectors developed by a company, using CFD analysis technique. For CDF analysis, RAN model and LES model are used. Result: As results of the analysis, amplitude of the pressure fluctuation acting on the wall of the piping system is formed at a level of 3,780 Pa or less, which is a very small level of pressure compared with the operating pressure or design stress of the refrigerant piping. Conclusion: These results mean that the effect of vibration caused by turbulence on the structural safety of the pipe is negligible.