• The KIPS Transactions:PartB
• /
• v.16B no.2
• /
• pp.93-100
• /
• 2009

In this paper, we propose a Difference Image Entropy based gaze direction recognition system. The Difference Image Entropy is computed by histogram levels using the acquired difference image of current image and reference images or average images that have peak positions from $-255{\sim}+255$ to prevent information omission. There are two methods about the Difference Image Entropy based gaze direction. 1) The first method is to compute the Difference Image Entropy between an input image and average images of 45 images in each location of gaze, and to recognize the directions of user's gaze. 2) The second method is to compute the Difference Image Entropy between an input image and each 45 reference images, and to recognize the directions of user's gaze. The reference image is created by average image of 45 images in each location of gaze after receiving images of 4 directions. In order to evaluate the performance of the proposed system, we conduct comparison experiment with PCA based gaze direction system. The directions of recognition left-top, right-top, left-bottom, right-bottom, and we make an experiment on that, as changing the part of recognition about 45 reference images or average image. The experimental result shows that the recognition rate of Difference Image Entropy is 97.00% and PCA is 95.50%, so the recognition rate of Difference Image Entropy based system is 1.50% higher than PCA based system.

• Journal of Digital Contents Society
• /
• v.16 no.3
• /
• pp.463-470
• /
• 2015

The angular dependence of active dosimeters, EPD, is analysed and compared with that of passive dosimeters, OSLD, after evaluating their relative response and uncertainty of measurement, where it is known that the personal use of them has been increased recently. There appeared a minor variation for average relative response of OSLD in the horizontal and vertical directions within the range $0^{\circ}{\sim}{\pm}90^{\circ}$, which are 0.97 and 0.95 respectively. The variations of angular dependence in the same situations with OSLD are 0.65 and 0.62, respectively, which also reveals a negligible effect on the overall uncertainty. EPDs within the interval $0^{\circ}{\sim}{\pm}60^{\circ}$ for horizontal and vertical directions are 0.94 and 0.97, respectively. These satisfy the requirements of IEC 61526. Uncertainties about the dependence of direction from horizontal and vertical directions are 0.44, 0.40, respectively. The impact of these uncertainties on the overall uncertainty was negligible. However, we observed a significant change in reactivity: the relative reactivities for $+90^{\circ}$ and $-90^{\circ}$ from the horizontal direction are 0.60, 0.37, while that form vertical direction is 0.06. The direction dependence of OSLD was superior to EPD in the range of $0^{\circ}{\sim}{\pm}90^{\circ}$. There appeared a rapidly changing structural features in EPD response for a certain direction. Therefore, we conclude that concurrent use of passive dosimeters and auxiliary dosimeter provides accurate data for personal dose measurements.

• The Journal of Korean Society for Radiation Therapy
• /
• v.33
• /
• pp.35-46
• /
• 2021

Purpose : By comparing and analyzing treatment plans using abdominal compression and The Continuous Positive Air Pressure(CPAP) during SABR of lung cancer, we try to contribute to the improvement of radiotherapy effect. Materials & Methods : In two of the lung SABR patients(A, B patient), we developed a SABR plan using abdominal compression device(the Body Pro-Lok, BPL) and CPAP and analyze the treatment plan through homogeneity, conformity and the parameters proposed in RTOG 0813. Furthermore, for each phase, the X, Y, and Z axis movements centered on PTV are analyzed in all 4D CTs and compared by obtaining the volume and average dose of PTV and OAR. Four cone beam computed tomography(CBCT) were used to measure the directions from the center of the PTV to the intrathoracic contacts in three directions out of 0°, 90°, 180° and 270°, and compare the differences from the average distance values in each direction. Result : Both treatment plans obtained using BPL and CPAP followed recommendations from RTOG, and there was no significant difference in homogeneity and conformity. The X-axis, Y-axis, and Z-axis movements centered on PTV in patient A were 0.49 cm, 0.37 cm, 1.66 cm with BPL and 0.16 cm, 0.12 cm, and 0.19 cm with CPAP, in patient B were 0.22 cm, 0.18 cm, 1.03 cm with BPL and 0.14 cm, 0.11 cm, and 0.4 cm with CPAP. In A patient, when using CPAP compared to BPL, ITV decreased by 46.27% and left lung volume increased by 41.94%, and average dose decreased by 52.81% in the heart. In B patient, volume increased by 106.89% in the left lung and 87.32% in the right lung, with an average dose decreased by 44.30% in the stomach. The maximum difference of A patient between the straight distance value and the mean distance value in each direction was 0.05 cm in the a-direction, 0.05 cm in the b-direction, and 0.41 cm in the c-direction. In B patient, there was a difference of 0.19 cm in the d-direction, 0.49 cm in the e-direction, and 0.06 cm in the f-direction. Conclusion : We confirm that increased lung volume with CPAP can reduce doses of OAR near the target more effectively than with BPL, and also contribute more effectively to restriction of tumor movement with respiration. It is considered that radiation therapy effects can be improved through the application of various sites of CPAP and the combination with CPAP and other treatment machines.

• Progress in Medical Physics
• /
• v.7 no.1
• /
• pp.53-64
• /
• 1996

Purpose: The purposes of this paper are to develop a theoretical basis that the beam directions should be considered when the mechanical accuracy of teletherapy machine is evaluated by the star pattern test, to develop methods using asymmetric field in length to simulate beam direction for the case that beam direction does not appear on film. Method: In evaluating mechanical rotational accuracy of the gantry of teletherapy unit by the star pattern test, the direction of radiation beams was considered. A star pattern using some narrow beams was made. Density profiles at 10cm far from estimated gantry axis on the star pattern were measured using an optical densitometer. On each profile, one coordimate of a beam axis was determined. A pair of coordinates on a beam axis form an equation of the axis. Assume that a unit vector equation omitted is with same direction as radiation beam and a vector equation omitted is a vector directing to the beam axis from the estimated gantry axis. Then, a vector product equation omitted ${\times}$ equation omitted is an area vector of which the absolute value is equal to the distance from the estimated gantry axis to the beam axis. The coordinate of gantry axis was obtained by using least-square method for the area vectors relative to the average of whole area vectors. For the axis, the maximum of absolute value of area vectors would be an accuracy of the gantry rotation axis. For the evaluation of mechanical accuracies of collimator and couch axes for which beam direction could not be depicted on a star pattern test film, narrow beams asymmetric in field length was used to simulate beam direction. Result: For a star test pattern to evaluate the mechanical accuracy of rotational axes of a telectherapy machine, the result considering beam direction was different from that ignoring beam direction. For the evaluation of mechanical accuracies of collimator and couch axes by means of a star pattern test, narrow asymmetric beams could simulate beam direction. Conclusion: When a star pattern test is used to evaluate the mechanical accuracy of a teletherapy unit, beam direction must be considered or simulated, and quantitatively evaluated.

• 한국HCI학회:학술대회논문집
• /
• 2006.02a
• /
• pp.486-492
• /
• 2006

본 논문에서는 비디오에서의 특징점 추적을 통해 얻은 2D 좌표를 이용한 3D 구조를 추정하는 방법과 네 점 이상의 공통점을 이용한 융합 방법을 제안한다. 영상의 각 프레임에서 공통되는 특징점을 이용하여 형상을 추정한다. 영상의 각 프레임에 대한 특징점의 추적은 Lucas-Kanade 방법을 사용하였다. 3D 좌표 추정 방법으로 개선된 직교분해기법을 사용하였다. 개선된 직교분해기법에서는 3D 좌표를 복원함과 동시에 카메라의 위치와 방향을 계산할 수 있다. 복원된 부분 데이터들은 전체를 이루는 일부분이므로, 융합을 통해 완성된 모습을 만들 수 있다. 복원된 부분 데이터들의 서로 다른 좌표계를 기준 좌표계로 변환함으로써 융합할 수 있다. 융합은 카메라의 모션에 해당하는 카메라의 위치와 방향에 의존된다. 융합 과정은 모두 선형으로 평균 0.5초 이하의 수행 속도를 보이며 융합의 오차는 평균 0.1cm 이하의 오차를 보였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.400-404
• /
• 2009

본 연구에서는 곧은 식생과 유연한 식생 및 다양한 수심비를 갖는 개수로 흐름 조건에 대한 수리실험을 실시하였다. 레이저 도플러 유속계를 이용하여 수로 전체 단면의 유속을 측정함으로써, 이차흐름이 평균유속 및 난류량에 미치는 영향을 분석할 수 있도록 하였다. 평균유속의 경우, 수치모의결과와 동일하게 측벽근처에서 최대 유속이 발생하였다. 유속측정자료를 이용하여 침수식생 개수로 흐름의 벡터도를 살펴본 결과, 침수식생 개수로의 경우 일반 개수로 흐름과는 달리 바닥 와 (bottom vortex)가 측벽 근처에서 매우 활발한 것으로 나타났으며, 이로 인해 수로 중앙의 높은 운동량을 가진 유체가 측벽방향으로 이동하고 있음을 확인하였다. 또한 측벽에서 이차흐름으로 인해 발생하는 강한 하강류가 레이놀즈응력 및 난류 강도의 수직방향 분포 형태에 영향을 미치는 것을 확인하였다.

• Journal of Ocean Engineering and Technology
• /
• v.10 no.3
• /
• pp.74-82
• /
• 1996

수면상에 떠있는 2차원 물체에 작용하는 시간평균 표류력 및 표류모오멘트를 비점성 선형 포텐셜 이론을 사용하여 계산하는 방법에 대하여 검토하였다. 부유체 접수면상의 압력을 직접적분하여 구한 수평방향 표류력이 특정주파수 부근에서 음의 값을 보이고 있다. 이는 무한원방에서의 에너지 보전방법에 의한 표류력이 항상 양의 값을 취한다는 기존 이론과 상이하다. 본 논문에서, 이러한 차이가 부유체의 횡요 및 상하동요에 기인한 복원력의 성분과 횡요와의 연성효과에 의하여 발생하였음을 규명하였다. 이는 횡요가 있는 경우, 표류력을 산출하는 기존의 무한원방 방법에 결함이 있음을 보이고 있다. 이에 반하여 기존의 접수면압력 직접적방법은 부유체에 작용하는 시간평균 표류력 및 표류모오멘트를 모든 주파수에 대하여 정확하게 산출한다고 결론지울 수 있다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.7 no.4
• /
• pp.313-320
• /
• 1995

A numerical analysis on the wave deformation in the shallow water region is performed for the case of two intersecting wave trains of the same frequency on uniformly sloping beaches. This model is based on the consideration of wave energy balance and wave action conservation, and iteratively solved the set of conservation equations of both mass and horizontal momentum. Using the computed results, the wave deformations in accordance with the variation of the parameters luck as incident wave angie and wave height in deep water which influences the variation of wave hight and mean water level under the intersecting wave trains in the shallow water region. are considered.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1998.10a
• /
• pp.31-31
• /
• 1998

제트베인을 이용한 추력방향 제어장치를 개발하여 평균추력 2950 lbf, 평균 압력 714 psig, 연소시간 4.8초, 노즐 출구직경 약 100mm인 추진기관에 장착하고 이를 시험하고 분석하였다. 재질에 따른 제트베인의 삭마성을 알아보기 위하여 텅스텐과 구리(W/Cu), 지르코늄산화물과 텅스텐(ZrO$_2$/W), 지르코늄 산화물과 몰리브덴(ZrO$_2$/Mo)의 3가지 재질의 베인을 사용하였다 시험된 제트베인 재질 중 지르코늄 산화물과 몰리브덴(ZrO$_2$/Mo)의 합금을 사용한 베인이 내열성 및 삭마성에서 가장 우수하였으며(삭마량 27.65% 삭마율 5.7mm/sec), 지르코늄 산화물과 텅스텐(ZrO$_2$/W), 텅스텐과 구리(W/Cu)의 순서이었다.

• Journal of the Society of Naval Architects of Korea
• /
• v.33 no.1
• /
• pp.109-123
• /
• 1996

A series of quasi-static crushing tests were carried out on thin-walled square tube specimens with axial and/or circumferential stiffeners including unstiffened specimens. The effective crushing length and mean crushing strength of the test specimens were investigated. Using the equivalent plate thickness approach, a simplified analytical model for predicting the mean crushing strength of stiffened square tubes has been developed.