• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.11
• /
• pp.762-769
• /
• 2017

The extensional stiffness in quasi-isotropic laminates is uniform in the radial direction, but the bending stiffness varies radially due to the stacking sequence. This paper addresses the directional dependency of the bending stiffness and its radial variation in three types of quasi-isotropic laminate reflectors consisting of unidirectional fiber composite materials (UDM) and randomly distributed composite materials (short fiber, RDM). The extensional stiffness and bending stiffness in optical reflectors using RDM are uniform, while the bending stiffness in those using UDM varies radially from 11% to 26%. Also, the stiffness sensitivity, such as the bend-twist or bend-torsion effect, due to the differences in the stiffness value in the composite, is large. These factors are problematic in the optical field requiring precision surfaces. Utilizing RDM might be one way to eliminate the presence of bending stiffness in composite mirror substrates.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.465-465
• /
• 2016

관거시설은 관거, 맨홀(manhole), 우수토실, 물받이, 연결관, 침투시설, 저류시설, 펌프장 등을 포함하는 시설들로 구성되어 있다. 여기서 맨홀은 배수시설의 유지와 관리를 위하여 일정거리마다 설치되고 있으며, 관거의 기점, 방향, 경사 및 관경이 변하는 곳, 단차가 발생하는 곳, 관거가 합류하는 곳에는 반드시 설치한다(환경부, 2011). 그러나 하수도시설기준(환경부, 2011)에서 합류맨홀의 설치에 관한 사항은 T형 합류맨홀에 관한 개략적인 표만 제시되어 있을 뿐, 4방향 합류맨홀에 대한 구체적인 설치 기준이 제시되어 있지 않은 실정이다. 또한 에너지 손실의 저감 및 배수능력을 증대시키기 위하여 맨홀내 설치되는 인버트는 미국의 형태 및 기준을 그대로 적용하고 있으므로 관거시설의 시설의 합리적인 설계기준을 제시하기 위하여 인버트가 설치된 4방향 합류맨홀에서의 흐름특성 및 수두 손실을 분석할 필요가 있다. 본 연구에서는 인버트가 설치된 4방향 합류맨홀 손실계수 산정 및 흐름특성을 분석하기 위하여 문헌조사 및 현장조사를 실시하여 수리실험 장치를 제작하였다. 실험에 사용된 맨홀은 하수도시설기준(환경부, 2011)의 표준 1호 맨홀을 1/5로 축소하였고, 인버트는 설치되지 않은 조건(CASE A), 반원형 인버트(CASE B), U형 인버트(CASE C)를 각각 실험하였으며, 실험유량으로 총 유출량 (Qout)은 $2{\sim}5{\ell}/sec$, 총 유출량에 대한 측면 유입량($Q_{Lat}$)의 비($Q_{Lat}/Q_{out}$)는 0~1 조건으로 변화시키면서 흐름특성 및 손실계수를 산정하였다. 실험결과 측면유량비가 증가함에 따라 CASE B와 CASE C는 CASE A보다 맨홀 내 수심이 약 3~7%정도 증가되는 경향을 나타내고 있었으며, 측면유량비의 증가에 따른 손실계수 산정 결과, CASE B는 CASE A 보다 약 30%정도 손실계수가 증가하였으며, CASE C는 CASE A보다 약 35%정도 손실계수가 증가하는 것으로 나타났다. 이는 기존에 사용되고 있는 인버트의 형상이 4방향 합류맨홀에서의 손실 저감 및 배수능력을 증대시키기 보다는 오히려 맨홀 내 통수능력을 저하시켜 4방향 합류맨홀에서의 배수능력을 저감시키는 것으로 분석되었다. 그러므로 기 사용되는 인버트의 개선이 필요하며 관거시설의 배수능력을 증대하기 위하여 지속적인 연구를 통한 개선된 인버트의 형상 제시가 필요할 것으로 판단된다.

• Journal of Korea Water Resources Association
• /
• v.50 no.12
• /
• pp.877-887
• /
• 2017

The energy losses due to surcharged flow at four-way combining manhole, which is mainly installed in the downstream of urban sewer system, is the main cause of inundation in urban area. Surcharged four-way combining manholes form various flow configuration such as straight through, T-type, and four-way manholes depending on variation of inflow discharge in inlet pipes. Therefore, it is necessary to analyze change of energy loss and estimate head loss coefficients at surcharged four-way combining manhole with variation of inflow discharge ratio. The hydraulic experimental apparatus which can change inflow ratios were installed to analyze the flow characteristics at four-way combining manhole. In this study, to calculate the head loss coefficient according to change of the inflow discharge ratios at the surcharged four-way combining square manhole, the discharge conditions of 40 cases which the inflow ratios of each inlet pipe were changed by 10% interval was selected. The head loss coefficient at surcharged square manhole showed the lowest value of 0.40 at the straight manhole and the highest value of 1.58 at the $90^{\circ}$ junction manhole. In the combining manholes (T-type and four-way), the head loss coefficients were calculated more higher as the lateral flow rate was biased. The contour map of head loss coefficient range was constructed by using the estimated head loss coefficients and the empirical formula of head loss coefficients was derived to consider the variation of inflow discharge ratios at the surcharged square manhole. The empirical formula could be applied to the design and assessment of the urban drainage system.

• Journal of Korea Water Resources Association
• /
• v.48 no.4
• /
• pp.299-308
• /
• 2015

The aim of this study is that a theoretical formula for estimating the one-dimensional longitudinal dispersion coefficient is derived based on a transverse distribution equation for the depth averaged stream-wise velocity in open channel. In "Part I. Theoretical equation for stream-wise velocity" which is the former volume of this article, the velocity distribution equation is derived analytically based on the Shiono-Knight Method (SKM). And then incorporating the velocity distribution equation into a triple integral formula which was proposed by Fischer (1968), the one-dimensional longitudinal dispersion coefficient can be derived theoretically in "Part II. Longitudinal dispersion coefficient" which is the latter volume of this article. The proposed equations for the velocity distribution and the longitudinal dispersion coefficient are verified by using observed data set. As a result, the non-dimensional longitudinal dispersion coefficient is inversely proportional to square of the Manning's roughness coefficient and the non-dimensional transverse dispersion coefficient, and is directly proportional to square of the aspect ratio (channel width to depth).

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2001.09a
• /
• pp.172-175
• /
• 2001

이 연구에서는 5개의 시추공에 대한 양수시험을 실시하여 대수층의 수리학적 이방성과 지하수의 주 유동방향을 규명하고자 하였다. 코아검층 및 초음파주사검층을 통해 각각의 공에 대한 균열방향을 결정하고 이를 토대로 통합해본 결과 크게 세 방향의 균열군이 집중성을 보였다. 가장 빈도가 높은 균열의 방향은 N0$^{\circ}$~40$^{\circ}$E/30$^{\circ}$~50$^{\circ}$SE 그리고 N30$^{\circ}$~ 80 $^{\circ}$W/20$^{\circ}$~50$^{\circ}$ NE이 방향이 함께 나타났으며 두 번째 균열의 방향은 N0$^{\circ}$ ~50$^{\circ}$E/60$^{\circ}$ ~80$^{\circ}$NW로 나타났다. 세 번째 방향은 N30$^{\circ}$~50 $^{\circ}$W/70$^{\circ}$~80$^{\circ}$SW방향의 균열로 구성된다. 이처럼 지표하에서는 크게 세 방향의 균열이 다른 방향을 보이는 균열에 비해 상대적으로 큰 빈도를 가지며 발달하고 있음을 알 수 있다. 대수층이 이방성이고 균질하다는 가정하에 양수시험을 실시하여 각각의 공에 대한 최대 투수량계수 ( $T_{{\varepsilon}{\varepsilon}}$)와 최소 투수량계수 ( $T_{ηη}$)값을 산출하고 주 텐서방향 ($\theta$)을 결정하였다. 그 결과 BH-1, BH-4, BH=5공을 제외한 BH-2, BH-3호공에서의 이방성 투수량계수텐서값은 이 논문의 가정인 대수층이 이방성이고 균질하다는 가정에 일치하지 않았다. 따라서 원형좌표계에 도시하였을 때 다른 공에 비해서 비균질성이 심한 결과로 인해 이방성타원체 에서 많이 벗어남을 보였다. 이로인해 3개의 공 BH-1, BH-4, BH-5호공을 사용하여 대수층의 이방성을 분석하여 보았다. BH-1호공에서의 $T_{{\varepsilon}{\varepsilon}}$는 171.90 $m^2$/day, $T_{ηη}$는 71.0l $m^2$/day이고 주 텐서방향은 Nl5.39$^{\circ}$ E로 나타났다. BH-4호공의 $T_{{\varepsilon}{\varepsilon}}$는 268.20 $m^2$/day, $T_{ηη}$는 28.75 $m^2$/day이고 주 텐서방향은 N7.55$^{\circ}$E이며 BH-5호공에서의 $T_{{\varepsilon}{\varepsilon}}$는 168.40 $m^2$/day, $T_{ηη}$는 66.80 $m^2$/day이고 주 텐서방향은 N76.59$^{\circ}$E로 나타났다. 이처럼 연구지역에서의 각각의 공에 대한 투수량계수텐서는 서로 다르게 나타났으며 이에 따른 주 텐서방향도 서로 다름을 알 수 있다.

• Journal of the Korean GEO-environmental Society
• /
• v.7 no.2
• /
• pp.15-24
• /
• 2006

In this paper, the Coefficient of Subgrade Reaction was analyzed from the data which were the results of lateral pile loading tests and pressuremeter tests on construction sites. The prediction method with N-value was compared with lateral pile loading tests and the results of lateral pile loading tests were compared with the prediction method considering diameter of a pile. Also, the results of lateral pressuremeter tests were compared with those of lateral pile loading tests. As a result, consideration for a diameter and lateral deformation of a pile was needed when the coefficient of horizontal subgrade reaction is presumed. Therefore, a formula which is taking into account the allowable deformation of a pile was suggested from lateral pressuremeter tests in this study.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.2
• /
• pp.153-160
• /
• 2015

The objective of this study is to construct the TPU aerodynamic database with wind tunnel test data of overall wind loads and responses on tall buildings. In this study, wind tunnel tests were conducted to investigate characteristics of wind forces and the effect of wind load combination by cross-correlation analysis among along-wind overturning moment, across-wind overturning moment and torsional moment on a tall building with various side ratios(D/B=0.33, 0.50, 0.77, 0.83, 0.91, 1.0, 1.1, 1.2, 1.3, 2.0 and 3.0) for different terrain roughnesses. The results of wind tunnel tests were compared with those of past literatures. As a result, there was no significant effects of changing of terrain roughnesses on moment coefficients and power spectral densities of across-wind overturning moment coefficients and torsional moment coefficients with various side ratios. Further, these results were good agreement with those of past literatures. From cross-correlation analysis, the across-wind overturning moment coefficients were highly correlated with the torsional moment coefficients. The results of this study will be helpful for practical designers in preliminary design stage.

• Journal of Korean Ophthalmic Optics Society
• /
• v.17 no.4
• /
• pp.469-476
• /
• 2012

Purpose: The purpose of this study is to investigate the changes of asphericity according to diameter and direction of the cornea. Methods: The changes of asphericity according to diameter and direction of cornea is measured by using Pentacam(Oculus Co., Germany), as targeting 57 adults (average $27.0{\pm}4.8$, 20 men, 37 women) without any ophthalmic diseases, which may be effective in eyesight, and refractive surgery. Results: As diameter increases in every direction based on the corneal vertex, asphericity has attentively increased (p<0.05), and the size of asphericity in each direction from every measured diameter showed as superior > nasal > inferior > temporal. In group comparison by nearsightness and astigmatism level, asphericity measured high when nearsightness and astigmatism levels were higher, and this appears to be statistically attentive.(p<0.05). Conclusions: Asphericity of cornea significantly increased according to increase of diameter of cornea, and as measured figure or increased quantity appeared differently in all directions based on corneal vertex, so it helps to understand shape of cornea, and considered that is the part to be considered during manufacturing and fitting of RGP lenses.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.914-918
• /
• 2009

권 등(2008)은 수면보다 높은 정방형 다열기둥을 이용한 수리실험을 수행하여 수심과 이격거리에 따른 상당저항계수를 측정하였으며 이를 바탕으로 Manning 계수형태의 상당저항계수 이론식을 제안하였다. 본 연구는 수면보다 높은 원형 다열기둥을 이용한 수리실험을 수행하여 이격거리와 수심에 따른 상당저항계수를 측정하였다. 실험결과로부터 이격거리만의 함수로 가정한 항력상 호작용계수를 추정하여 이를 권 등(2008)의 이론식에 적용하여 실험결과와 비교하고 분석하였다. 정방형 다열기둥의 실험결과와 원형 다열기둥의 실험결과를 비교하여 흐름방향 이격거리가 큰 범위에서는 원형기둥의 저항계수가 정방형기둥의 저항계수보다 작게 측정되지만 흐름방향 이격거리가 감소할수록 원형기둥의 저항계수가 정방형기둥의 저항계수보다 증가하면서 원형기둥이 정방형 기둥보다 저항정도가 큰 상태가 되는 것을 알 수 있었다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.11
• /
• pp.948-956
• /
• 2012

This paper presents the computations of the longitudinal and directional stability derivatives for the SDM(Standard Dynamic Model). The static and dynamic derivatives are evaluated at once using forced harmonic oscillations in the pitch and yaw directions. For the numerical simulations, a 3-D Euler solver that uses a dual time stepping method for unsteady time accurate simulations is applied. This work investigates the variation of the derivatives in terms of the Mach number and the several motion parameters. Good agreement of the pitch and yaw stability derivatives with previously published numerical results and experimental results are observed.