• Title/Summary/Keyword: 방출

Search Result 5,634, Processing Time 0.04 seconds

Control of Drug Release from Polymeric Matrices Coated with Poly(DL-lactide) I. Effect of Coasting Substance on the Drug Release in pH 1.2 Hydrochloride Solution (Poly(DL-lactide)로 피막된 고분자 매트릭스로부터 약물 방출 조절 I. pH 1.2 염산 용액에서 피막물질이 약물방출에 미치는 영향)

  • 나재운;박영훈
    • KSBB Journal
    • /
    • v.14 no.3
    • /
    • pp.297-302
    • /
    • 1999
  • The polymeric matrices coated with poly(DL-lactide) were prepared using chitosan derivatives such as chitosan, chitosan hydrochloride, and sulfonated chitosan for application of drug delivery systems. The drug release study using prednisolone as a model drug was performed in the hydrochloride solution at pH 1.2. The release rate of drug was decreased according to the increased content of matrices. The release rate of prednisolone according to the kinds of polymeric matrices coated were decreased in the order to chitosan, sulfonated chitosan, and chitosan hydrochloride. Drug release rate of polymeric matrices coated with poly(DL-lactide) was not only two times slower than noncoated one, but also the burst effect of initial period of drug release was decreased in comparison with noncoated one. From these results, it was expected that these formulations based on the chitosan derivative matrices coasted with poly(DL-lactide) were acceptable drug delivery devices for a sustained-release dosage form of drug.

  • PDF

Field emission properties of diamond-like carbon films deposited by ion beam sputtering (이온빔 스퍼터링으로 제작된 다이아몬드성 카본 필름의 전계 방출 특성)

  • 안상혁;이광렬;전동렬
    • Journal of the Korean Vacuum Society
    • /
    • v.8 no.1
    • /
    • pp.36-42
    • /
    • 1999
  • Field emission behaviors from diamond-like carbon films were investigated. The films were deposited on n-type Si wafer by ion beam sputtering method using 3 cm Kaufman type ion source. Regardless of the film thicknesses and atomic bond structure, the emission current was much enhanced by electrical breakdown between anode and the film surface. The effective work function was estimated to be about 0.1 eV. In order to identify the emission site, tungsten tip was scanned the damaged region damaged region but localized to a specific site. Analysis using Auger electron spectroscopy and SEM shows that SiC compound was not a sufficient condition for the electron emission. This result showed that the enhanced emission was mainly due to the changes in the chemical bond of the damaged region rather than the enhanced electric field caused by the morphological change.

  • PDF

A study on the acoustic emission characteristics of laminated composite structures (복합재료 적층 구조물의 음향방출 특성 연구)

  • 박재성;김광수;이호성
    • Composites Research
    • /
    • v.16 no.6
    • /
    • pp.16-22
    • /
    • 2003
  • This paper studied the AE(acoustic emission) characteristics of the laminated composite structures. The composite stiffened panels under the compressive loading emitted various AE signals when they buckled or changed the buckling modes. In addition, the failure initiated and propagation generated a lot of complex signals. From the continuous signal generation. we identified when the failures initiated and whether they propagated or not. The single lap joint of laminated plates under tensional load also generated AE signals when bonding region failed. The first failure occurrence and its propagation are monitored by generated AE signals. The characteristics of AE signals used in this analysis are cumulative hits, hit distribution, peak frequency of generated AE waveform and amplitude of signals. The analysis of AE signals shows that continuous increment of cumulative hits can be regarded as damage propagation and three dominant peak frequencies can correspond to typical failure modes in the laminated composites.

Patent Trend Report for Field Emission Display (FED) (전계 방출 디스플레이의 특허 동향 분석)

  • Jeong, In-Seong
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2008.06a
    • /
    • pp.467-467
    • /
    • 2008
  • 전계 방출 디스플레이는 CRT와 FPD(평판디스플레이)의 장점을 모두 갖춘 디스플레이로서 주목을 받고 있으며, 여러 국가와 많은 연구자들이 연구개발을 활발히 진행하고 있는 차세대 디스플레이 중 하나이다. 본 연구에서는 최근 차세대 디스플레이로서 연구가 활발히 진행되고 관심이 높아지고 있는 전계 방출 디스플레이의 특허 동항에 대하여 살펴보았다. 전계 방출 디스플레이 분야의 특허는 1994년과 1995년을 전후하여 출원이 급격하게 증가하고 있고, 최근에도 출원량이 증가하는 것으로 나타났다. 국가별 분포에서는 한국이 37%로 가장 높게 나타났고, 미국이 32%, 일본이 27%, 유럽이 4%의 순으로 나타났다. 특히 한국은 최근에도 다른 나라에 비해 특허 출원량이 가장 많은 것으로 분석되었다. 이는 최근 한국이 디스플레이 전체에 대해 세계적으로 주도하고 있는 경향을 반영하고 있다. 각 기술별 출원 동향을 보면, 캐소드가 주요 출원국가 전체에서 가장 높은 비율을 차지하고 있고, 진공실장, 구동회로, 애노드의 순서로 분석되었다. 전계 방출 디스플레이 분야의 주요 출원인을 살펴보면 삼성SDI가 압도적으로 많은 비율을 차지하였고, 그 뒤를 LG전자 및 Canon, 오리온전자, 마이크론 등이 주요 출원인으로 분석되었다. 국가별 분석 결과에서와 같이, 주요 출원인에서도 디스플레이 시장을 선도하는 삼성SDI, LG전자, Canon 등이 가장 많은 출원 비율을 차지하는 것을 알 수 있었다. 국가별 주요 출원인으로, 한국에서는 삼성SDI, LG전자, 오리온전자, 일본에서는 Canon, Sony, Toshiba였고, 미국에서는 마이크론과 ITRI, 유럽에서는 삼성SDI와 Sony로 분석되었다. 따라서, 전계 방출 디스플레이를 연구 하고자 하는 연구소나 기업에는 삼성SDI, LG전자, Canon, Sony 등의 연구 개발 상황 또는 특허 출원 상태를 면밀하게 분석할 필요가 있다. 캐소드의 전자방출원의 형성 형태로는 팁형이 가장 많고, CNT형, 평면형의 순서로 나타났다. 그러나, 한국에서는 전자방출원으로 CNT헝이 가장 많게 나타나므로서 다른 나라들과는 연구 개발 형태가 조금 다른 것으로 분석되었다. 전계 방출 디스플레이의 특허 동향을 분석한 결과, 한국이 일본, 미국, 유럽보다 더 활발하게 특허 출원하고 있는 것으로 분석되었고, 최근에도 다른 나라에 비해 활발하게 특허를 출원하고 있어 향후에도 디스플레이 시장은 한국에서 주도해 나갈 것으로 판단되었다. 주요 출원인으로는 삼성SDI, LG전자, Canon, Sony로 분석되었으며, 위와 같은 선진 기업 및 주요 출원인은 연구개발 및 특허 출원 상황을 면밀하게 검토할 필요가 있다.

  • PDF

RELAP5/MOD3 Analysis for Hydraulic Load Calculation of the SEBIM POSRV Discharge Riping System (SEBIM POSRV 방출배관계통의 수력학적 하중계산을 위한 RELAP5 / MOD3 분석)

  • Han, Kee-Soo;Song, Jin-Ho
    • Nuclear Engineering and Technology
    • /
    • v.26 no.2
    • /
    • pp.225-236
    • /
    • 1994
  • The sudden discharge of the loop seal water, which is present upstream of the SEBIM POSRV, creates large momentum and inertia forces on the downstream of the discharge piping system. This study provides the procedures and results of analysis of the thermal-hydraulic transient in the SEBIM POSRV discharge piping during the valve opening. The analysis is peformed by RELAP5/MOD3. The appropriate modeling of the discharge piping system, SEBIM POSRV opening characteristics, and loop seal water discharge for the RELAP5/MOD3 analysis is suggested. Also performed is the sensitivity study for the selection of proper options for the junction and volume control. flags. The analysis results demonstrate the adequacy of the RELAP5/HOD3 for the thermal-hydraulic transient analysis of the loop seal water discharge of the SEBIM POSRV discharge piping system. From the sensitivity analysis results, it is shown that the smooth area change option with reasonable geometric pressure drop distribution, non-equilibrium option, and proper time step should be selected for loop seal water discharge analysis.

  • PDF

A Study on Annual Release Objectives and Annual Release Limits of Gaseous Effluents During Decommissioning of Nuclear Power Plants (원전 해체 시 기체상 유출물의 연간 방출관리치 및 방출한도치에 관한 연구)

  • Lee, Seung-Hee;Hwang, Won-Tae;Kim, Chang-Lak
    • Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
    • /
    • v.17 no.3
    • /
    • pp.299-311
    • /
    • 2019
  • Decommissioning is a critical issue in Korea. Although compared with the operation of nuclear power plants the release of radioactive materials during decommissioning is not expected to be significant, residents should always be protected from radiation exposure. To manage this effectively, Annual Release Objectives (ARO) and Annual Release Limits (ARL) were derived from dose standards in the NSSC Notice and dose limit for the public. Based on meteorological data for the three years from 2008 to 2010 in the Shin Kori nuclear power plant site, atmospheric dispersion and ground deposition factors of gaseous effluent were evaluated using the XOQDOQ computer code. The exposure dose was evaluated using the ENDOS-G computer code. Because of differences in radiological sensitivity according to age groups, the results of Annual Release Objectives (ARO) and Annual Release Limits (ARL) showed significant differences depending on the radionuclides. The evaluation methodology of this study will provide meaningful information for radioactive effluent management for decommissioning of nuclear power plants.

Characteristics of controlled drug release using conductive polymer electrochemically polymerized on multi-electrodes (다중 전극에 전기 중합한 전도성 고분자를 이용한 선택적 약물방출 특성)

  • Song, Tae-Eun;Chang, Jong-Hyeon;Son, Ji-Hee;Yang, Sang-Sik;Pak, Jung-Ho
    • Proceedings of the KIEE Conference
    • /
    • 2004.11a
    • /
    • pp.278-280
    • /
    • 2004
  • 본 논문의 내용은 다중전극에 전기 중합한 전도성 고분자를 이용하여 약물을 결합한 후 전압 인가에 의한 선택적인 약물방출을 구현하는 것이다. Glass wafer에 anode와 cathode 전극을 제작하고 4개의 anode 전극면에 각각 전기중합으로 전도성 고분자막을 합성하였다. 양이온성 약물인 lidocaine을 결합할 수 있도록 피롤과 함께 도펀트로써 분자량이 큰 DBS를 사용하였으며 고분자막의 이온출입원리를 이용하여 약물을 결합하고 방출하였다. Cyclic voltammogram로부터 PPy(DBS) Polypyrrole (dodecylbenzene sulfonate) 전극의 산화 환원특성 및 전극면에 PPy(DBS) 막이 생성되기 위한 조건을 확인하였고, 그 결과를 토대로 PPy(DBS)막을 3전극 시스템과 Coulometry를 이용하여 전압을 인가하여 합성하였고, 합성전하량으로 부터 PPy(DBS)막의 두께를 알 수 있었다. Lidocaine의 결합 및 방출 시에도 정전압을 이용하였으며 약물의 방출 유무를 확인하기 위하여 UV spectrometer를 사용하였다. 다중전극에 PPy(DBS)막을 1.5um 두께로 합성한 후 lidocaine을 결합시키고 선택적으로 약물을 방출한 결과 각각의 PPy(DBS)막으로부터 $1.4{\sim}1.7mg$의 약물이 방출됨을 확인 할 수 있었다.

  • PDF

Emission Characteristics of Volatile Organic Compounds from Air Fresher using Small Emission Chamber (소형방출챔버를 이용한 방향제의 휘발성 유기화합물 방출특성에 관한 연구)

  • Jung, Young-Rim;Park, Hyun-Hee;Oh, Youn-Hee;Kim, Soon-Geun;Sohn, Jong-Ryeul;Kim, Sun-Hwa;Yu, Young-Jae;Bae, Gwi-Nam;Kim, Man-Goo
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.33 no.3
    • /
    • pp.183-190
    • /
    • 2011
  • This study investigated the emissions characteristics of air freshener using small emission chamber method. The emission of VOCs from air freshener were determined in the small chambers in the temperature (25, $30({\pm}1)^{\circ}C$), relative humidity ($50{\pm}5%$), ventilation rate (0.3, 0.5, ($0.8({\pm}0.005)/hr$), and sample loading factor ($1.4{\sim}551.0g/m^2$) in this study. The emission tests from air freshener for sample loading factor resulted in TVOC emission rates of $0.7{\sim}64.4mg/m^2{\cdot}h$ after 5 hours. For most target VOCs such as limonene, ${\alpha}$-pinene and linalool, higher temperature and ventilation rate levels exhibited increased emission rates.

Preparation and Drug Release Properties of Naproxen Imprinted Biodegradable Polymers Based Multi-Layer Biomaterials (나프록센이 각인된 생분해성 고분자 기반 다층 바이오소재의 제조 및 약물 방출 특성)

  • Eun-Bi Cho;Han-Seong Kim;Min‑Jin Hwang;Soon-Do Yoon
    • Applied Chemistry for Engineering
    • /
    • v.34 no.2
    • /
    • pp.161-169
    • /
    • 2023
  • In this study, we prepared naproxen (NP) imprinted biodegradable polymer based multi-layer biomaterials using allbanggae starch (ABS), polyvinyl alcohol (PVA), and alginic acid (SA), and investigated their physicochemical properties and the controlled drug release effects. In addition, the prepared multi-layer biomaterials were characterized by FE-SEM and FT-IR. In order to confirm the controlled drug release effect for the transdermal drug delivery system (TDDS), the NP release properties of NP imprinted multi-layer biomaterials were investigated using various pH buffer solutions and artificial skin at 36.5 ℃. The results of NP release in various pH buffer solutions indicated that the NP release at high pH was about 1.3 times faster than that at low pH. In addition, NP release in multi-layer biomaterials was about 4.0 times slower than that in single-layer biomaterials. It was confirmed that the NP release rate in triple-layer biomaterials was 4.0 times slower than that in single-layer biomaterials while using artificial skin. Also, it could be found that NP in double-layer biomaterials and triple-layer biomaterials was released sustainably for 12 h. The NP release mechanism in pH buffer solutions followed the Fickian diffusion mechanism, but followed the non-Fickian diffusion mechanism with artificial skin.

기술현황분석 - 원전 압력방출장치의 용량인증기관 현황

  • Son, Sang-Ho
    • 기계와재료
    • /
    • v.26 no.1
    • /
    • pp.50-62
    • /
    • 2014
  • 원전발전소에 납품되는 원전용 안전밸브의 성능은 ASME나 KEPIC와 같은 기술기준코드에 따라 설정압력, 블로우다운(blowdown), 풀리프트(Full lift), 누설(leakage), 방출용량(discharge flow rate)등과 같은 특성인자로 평가된다. 그 중에서도 방출용량은 ASME SEC III NB 7000 코드에 따라 ASME 용량인증이 요구되지만, 아직 국내에는 국제적으로 공인되니 압력방출장치 용량시험기관이 부재하여 외화유출 및 국내 PRD 기술개발에 많은 어려움이 있어왔으며, 이에 따라 원전 PRD 인증기관 개발을 통하여 세계적인 인프라 구축의 필요성이 부각되고 있다. PRD 인증기관 구축은 국내 원전 핵심기자재의 고급기술 국산화에 이바지 할 수 있고, PRD 성능 및 용량시험지원을 통하여 국내 밸브기술 경쟁력 확보하는 데 기여할 것으로 기대된다.

  • PDF