• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.121.2-121.2
• /
• 2013

제3세대 방사광 가속기의 저장링에 사용하는 알루미늄합금 진공용기를 압출방법으로 제작하여 시험하였다. 기체방출률과 표면거칠기를 줄일 목적으로 압출 시 분위기 기체를 제어하거나 압출 후 내표면 처리를 하였다. 몇 가지 제작 공정을 마친 후 수행한 진공시험의 결과를 진공도, 기체방출률, 표면조도로 비교하여 보고한다.

• Journal of the Korean Institute of Gas
• /
• v.4 no.1 s.9
• /
• pp.9-15
• /
• 2000

In order to investigate the structural defects of a cylindrical-type toluene storage tank, we carried out the acoustic emissions. The storage tank was manufactured with high strength steel in 1978 and its's first and second courses from bottom were entirely repaired, recently. Acoustic emissions were monitored with real time according to load sequences in the $75{\~}84\%$ level range of maximum allowable load. Our results show a non-genuine acoustic emissions as well as a genuine characteristics. The pseudo emissions considered as valve noises were transiently occurred on shut-off processes of inlet valve regardless of water loading. The acoustic emission events occurred during water filling phase were estimated due to defects, and in the $75{\~}84\%$ test load level no evidences of defect growth were observed. Those defects were ascertained as weld cracks and porosities through the post radiography testing conducted near active sensors.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2009.04a
• /
• pp.557-563
• /
• 2009

FMVSS 302 수평 연소 시험법을 통과한 자동차 내장재의 열적 특성을 평가하기 위해서 콘칼로미터를 이용하여 시험을 수행하였다. 화재 위험과 관련된 착화시간(time to ignition), 열방출률(heat release rate), 질량감소율(specific mass loss rate), 감쇠계수(extinction coefficient) 그리고 연기요소(smoke factor)와 같은 여러 가지 요소들을 분석하였다. 최대 열방출률값은 시험편에 따라 232${\sim}$635kW/$m^2$으로 큰 편차를 보였으며, 연기요소 또한 99${\sim}$551MW/$m^2$로 큰 편차를 보였다. 보조매트의 최대 열방출률은 다른 시험편에 비해서 상대적으로 낮은 값을 보였지만, 총연기 발생이 다른 시험편에 비해서 상당히 높았다. 따라서 최대 열방출률과 총 연기발생을 함께 고려한 연기요소값은 상대적으로 다른 시험편에 비해서 높게 나타났다.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.1
• /
• pp.54-66
• /
• 2001

The aim of this study was to investigate the fluoride release and some mechanical properties including 3-point bending strength, amount of abrasion, surface hardness, water sorption/solubility and cytotoxicity of the newly developed composite resins containing 8, 16, 24 wt% $SrF_2$ glass filler (VF8, VF16, VF24) and four commercially available composite resins, Heliomolar(HE), Verdonfil(VE), Z100(ZH) and Aelitefil(AE). To investigate cytotoxic effect, agar overlay assay was done. Amount of fluoride released into distilled water was measured over a 62-days period from VF8, VF16, VF24 and HE. Results were as follows: 1. Experimental composite resins showed similar mechanical properties to commercial composite resins, but 3-point bending strength and surface hardness of experimental composite resins were inferior to ZH. 2. Over a 62-day Period, the amount of fluoride released was ordered: VF24>VF16>VF8>HE. In experimental composite resins, the amount of fluoride released was 9-23 times greater than HE and seemed to be proportional to the content of $SrF_2$ glass filler. 3. Experimental composite resins and all control composite resins showed mild cytotoxicity. This study showed significantly greater fluoride release from newly developed composite resins than control(HE) and addition of $SrF_2$ glass filler did not decrease mechanical properties or increase cytotoxicity of composite resin. The results from this study imply that newly developed composite resin have adequate mechanical properites, mild cytotoxicity and some potential for secondary caries prevention.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.9
• /
• pp.1131-1136
• /
• 2011

This study is performed on the acoustic emission parameters involved in a burst test for a CNG-vehicle fuel tank. A resonant AE sensor with a central frequency of 150 kHz was attached on the composite materials in the center of the fuel tank. The analysis of AE parameters such as hit, amplitude, count, duration, risetime, and signal strength during load holding was performed. The total count and total signal strength are effective tools for the damage evaluation of a CNG fuel tank.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2010.10a
• /
• pp.251-256
• /
• 2010

주거 건축 및 가구산업의 자재로써 합성목재(Wood-Plastic Composites)는 점차 각광받고 있다. 본 연구에서는 합성목재의 연소특성을 살펴보기 위하여 한계산소지수 측정(ASTM D2863) 및 콘칼로리미터 시험(ISO 5660-1)을 실시하였으며 또한 일반목재인 적송(red pine)과 방부 처리를 한 방부목에 대하여도 동일한 시험을 통하여 합성목재와 연소특성을 비교 검토하였다. 한계산소지수 측정결과 합성목재가 적송 및 방부목에 비해 가장 낮게 측정되었다. 콘칼로리미터 시험결과 합성목재의 열방출률값이 가장 빨리 피크치에 도달하였고 점차적으로 감소하였다. 합성목재의 최대 열방출률 값 및 평균 열방출률 값은 적송 및 방부목에 비해 가장 높게 나타났으며 총 방출열량 또한 가장 높게 나타났다.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2013.11a
• /
• pp.69-70
• /
• 2013

• Journal of the KSME
• /
• v.28 no.4
• /
• pp.337-342
• /
• 1988

음향 방출법은 기존의 비파괴 시험보다 여러 가지 면에서 장점을 가지고 있으나 아직 우리나라 에서는 그 사용 예가 많지 않다. 따라서 본 고에서 음향 방출법을 소개하면서 몇 가지 응용예를 간략히 들고자 한다.

• Journal of the KSME
• /
• v.32 no.1
• /
• pp.28-38
• /
• 1992

음향 방출법은 기존의 비파괴 시험보다 여러 가지 면에서 장점을 가지고 있고 또 그 응용범위는 매우 넓다. 그러나 아직 우리 나라에서는 그 사용 예가 많지 않다. 이 글에서는 음향 방출법에 대한 개요와 음향 방출법을 이용한 복합재료와 금속재료의 균열 거동 해석 예를 저자의 연구 결과를 중심으로 소개하고자 한다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.23 no.5
• /
• pp.488-496
• /
• 2003

To establish nondestructive test method for rocket motor assembly with rubber and aerospace composite materials, practicable quality control acoustic emission test method is presented. Structural analysis for motor assembly is performed by ABAQUS code and analysis output result is confirmed by strain gage and AE data. Various specimens were tested and analyzed using strain gage and acoustic emission data. The hit rate of acoustic emission was closely related with case/rubber debonding. This report also describes practicable acoustic emission nondestructive method for evaluating motor case assembly quality assurance in the industrial field.