• Journal of the Korean Society for Railway
• /
• v.16 no.5
• /
• pp.358-364
• /
• 2013

In the second part of the paper, a design strategy for an apartment complex constructed at a railway depot is proposed for vibration reduction purposes. Various design parameters such as the vehicle operating speeds, artificial land behavior, housing support structure, and apartment sub-structures are individually examined to reduce the transmission of vibrations through building structures. Building construction on an artificial land should be subjected to regulations that require the application of a vibration reduction scheme based on the mechanics that govern the vibration transmission phenomena. The implementation of these parameters at an early design stage will provide a quiet living environment for residents who may be exposed to excessive noise and vibration.

• Journal of KSNVE
• /
• v.10 no.1
• /
• pp.13-17
• /
• 2000

• Elastomers and Composites
• /
• v.37 no.2
• /
• pp.107-114
• /
• 2002

This paper discusses the accelerated heat aging tests were carried out to predict the useful life of EPDM isolating rubber components of ventilation fan motor for clean room. 20% compression set results changes as the threshold are used for assessment of the useful life and the time to threshold value were plotted against reciprocal of absolute temperature to give the Arrhenius plot. The useful life at variable temperatures and activation energy are obtained from the Arrhenius relationship. An accelerated test program to assess useful life can be represented an appreciable investment in time was designed. We also considered the effect of antioxidant agents.

• Journal of the Korean Society for Railway
• /
• v.17 no.4
• /
• pp.281-288
• /
• 2014

The objective of this study was to estimate the vibration reduction capacities of a floating track system using a resilient rubber mat, and to compare the results with the track support stiffness and track impact factor of a conventional slab track system by performing field tests using actual vehicles running along a service line. The theoretically designed track support stiffness and track impact factor were compared with the measured track support stiffness and track impact factor for each tested track. The calculated and measured track support stiffness of the floating track system were found to be similar, and the floating track system satisfied the design specifications of the track impact factor. The overall vibration level and track support stiffness of the floating track system were thereupon found to be significantly lower than those of the conventional slab track system. The experimental results thus showed that the vibration reduction effect of the floating track system is greater than that of the conventional slab track.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.04a
• /
• pp.233-239
• /
• 1995

정밀장비의 내진 및 방진설계에 대한 일반적인 procedure를 제시하고 이를 정밀제어 장비인 HDD CELL에 적용하였다. 정밀장비의 내진 설계를 위해서 는 정확한 진동 허용규제치와 정밀장비가 설치되는 구조물의 진동 환경에 대한 데이터를 확보하는 것이 우선적으로 해야할 일이다. 구조물의 진동은 직접 측정을 하거나 설계 자료를 이용하는 것이 가능하지만 진동 허용규제치는 장비 제작사에서 진동환경시험을 통하여 얻어진 자료를 사용 자에게 제시하는 것이 일반적인 과정이다. 그러나 고도의 정밀성을 요하는 장비 전체를 가진 테이블에 설치하여 진동환경시험을 수행하는 일은 시간과 경제적인 측면에서 유익하지 못하다. 그러한 면에서 본 논문에 제시한 진동 허용가진력 규제치를 이용한 정밀장비의 내진 및 방진의 정량적인 설계뿐만 아니라 진동 허용규제치를 손쉽게 구할 수 있다는 점에서 유익하다 하겠다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.3
• /
• pp.694-702
• /
• 2017

In the case of an elevated railway station, structure borne noise and vibration due to structural limitations allow the load and vibration from railway vehicles to be directly transmitted to the station structure, resulting in an increase in the number of civil complaints from customers and staff of the station. The floating slab track system, which is well known as one of the solutions for reducing the noise and vibration from elevated railway stations, usually contains rubber mounts or rubber pads under the railway slab which act as a damper. These types of device have the disadvantage that is difficult to predetermine the exact stiffness and damping ratio under the nonlinear loads resulting from train services. In this study, an isolator with a friction type of wedge is introduced, which can be applied to floating slab track systems and to be designed with precisely the required stiffness. Furthermore, a comparative analysis of the stiffness between the designed and experimental values is carried out, while the damping ratio, which is closely related to the friction wedge blocks, is deduced according to the train load condition. The performance tests of the isolator were conducted in accordance with the DIN 45673-7 standard which includes both static and dynamic load tests. The load conditions for the performance tests are designed to conform to the DIN standard related to the weight of the train and rail track, in order to perform vertical and horizontal load tests, so as to ensure the secure structural safety of the railway. Also, by checking the change aspect of the friction coefficients of the friction elements according to the loading rate, the vibration reduction performance of the friction type isolator with variable loading rate conditions is examined.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.9
• /
• pp.70-70
• /
• 2000

• Journal of KSNVE
• /
• v.9 no.6
• /
• pp.1065-1071
• /
• 1999

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.34 no.10
• /
• pp.22-32
• /
• 2005

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.1772-1777
• /
• 2000

The Combat Computer Consoles installed in surface ships should endure harsh environment such as vibration from engine or propeller and shock from underwater explosion. Generally, commercial isolation mounts are selected and used for anti-vibration and anti-shock design. In this research, the environment of the Combat Computer Console was analyzed first. Selected proper mount was modeled and computer simulation was performed to emulate the environment test. The real environment test was conducted with a manufactured Combat Computer Console. The test results were same as the simulation and satisfied the performance requirements. The computer simulation proved to be a useful design tool to predict the performance before the final environment test.