• 한국정밀공학회지
• /
• 제33권6호
• /
• pp.485-490
• /
• 2016

This study focused on developing an electro-discharge truing method for the ELID grinding process using a metal-bonded grinding wheel. The truing process in grinding plays important roles in enhancing the quality of the ground surface. In this study, a reference current in the electro-discharge truing process was confirmed to be a viable solution for efficient truing through performance experiments. Current and voltage variation experiments were carried out and the variation output data were collected with a monitoring program to understand the electrodischarge phenomenon that occurs between metal-bonded grinding wheels and copper electrodes. The experimental results showed that as the reference current decreased, the average electro-discharge energy decreased. Therefore, the reference current can be used as an indicator to estimate the size of the gap between the truer and grinding wheel.

• 한국기계가공학회지
• /
• 제15권3호
• /
• pp.79-85
• /
• 2016

Truing process is a very important process for recovering the shape of wheels worn by continuous grinding operation. In this study, the devices, controller, and spindle for electro-discharge truing were developed, and the electro-discharge truing method was applied to metal-bonded grinding wheels and compared with the conventional truing method. The shapes of the grinding wheels were measured by a surface profile measurement device. The protrusion of abrasives on the surface of the wheels was compared with the conventional truing method using an optic microscope measurement device. The experimental results showed that the performance of the electro-discharge truing method, in terms of the protrusion of abrasives on the surface of the wheels and the recovery of the shape of the worn wheels, was similar to that of the conventional truing method.

• 한국정밀공학회지
• /
• 제17권3호
• /
• pp.122-128
• /
• 2000

세라믹, 다이야몬드등과 같은 고경질재료에 대한 미소형상의 가공은 대단히 어렵고 일반적인 방법으로는 상당한 시간을 요구한다. 이러한 재료의 고능률 가공을 실현하기 위하여, 메탈본드 다이야몬드휠에 전해 인프로세스 드레싱(Electrolytic In-Process Dressing)을 적용한 연삭을 머시닝센타에서 시도하였다 본 연구에서, 메탈본드 다이야몬드휠은 전기방전에 의하여 고능률로 트루잉(truing)되었다. 알루미나 세라믹의 핀선단($\phi$50$\mu\textrm{m}$)과 로커웰 경도측정기의 다이야몬드 압입자(indenter)($\phi$40$\mu\textrm{m}$)를 ELID연삭에 의하여 창성하였다. 그 결과를 본 논문에서 보고한다.