• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.4
• /
• pp.469-477
• /
• 2021

In this study, the mechanical property of anti-fouling coating using CNF was evaluated to prevent the durability and stability of structure exposed the marine environment. Anti-fouling coating using CNF was prepared by CNF, AKD and waste glass powder, and contact angle test, drying time, viscosity analysis and microstructure were performed. When coating on one number of times, It was showed to relatively high hydrophobic performance in steel. And It was confirmed that the contact angle increased as the content of AKD increased in cement mortar. When coating on three number of times, the surface was confirmed super-hydrophobic at maximum of 151.6°. When mixing waste glass powder, the surface was showed to relatively high hydrophobic. It is pseudo plastic fluid when CNF and distilled water were prepared in a ratio of 1:1, And Anti fouling coating is judged to be suitable for use as coating on marine structure.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.19 no.3
• /
• pp.241-248
• /
• 1986

New Paint, Stapol N-6200D, products from Song Woun Industrial Co. Ltd., was tested on its chemical effect on fouling organisms attached to fishing nets. Two kinds of fishing nets with different mesh size, 5 mm (cage culture net) and 33 mm (set net) were painted and attached to $1m^2$ PVC quadrates. The quadrates with painted or non-painted fishing nets were placed at the surface water layer of southern coast of Korea. Monthly species composition and abundance of fouling organisms were analysed as well as total weight of fouling organisms including mud on fishing nets. On the other hand, anti-fouling effect of the organisms and mud on different color paints was studied and the durability of chemical effect of painted fishing net on fouling organisms was also estimated.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.06a
• /
• pp.134-135
• /
• 2013

In this study, the physical properties and antifouling were investigated to make the Marine growth antifouling coatings by blending of synthesized silicone resin and pigment with a low surface tension. To examine the film properties and foul release of the prepared coatings, film specimens were prepared with the prepared coatings and anti corrosion coatings. The test results showed that the silicone type antifouling coatings had very excellent antifouling properties rather than any other coatings because of the coating films had followed the low surface tension and elasticity, and prevention of adhesion for marine growth and mechanical adhesions.

• Mineral and Industry
• /
• v.21 no.1
• /
• pp.1-17
• /
• 2008

• Membrane Journal
• /
• v.31 no.1
• /
• pp.16-34
• /
• 2021

Water supplies are decreasing in comparison to increasing clean water demands. Using nanofiltration is one of the most effective and economical methods to meet the need for clean water. Common methods for desalination are reverse osmosis and nanofiltration. However, pristine membranes lack the essential features which are, stability, economic efficiency, antibacterial and antifouling performances. To enhance the properties of the pristine membranes, graphene oxide (GO) is a promising and widely researched material for thin film composites (TFC) membrane due to their characteristics that help improve the hydrophilicity and anti-fouling properties. Modification of the membrane can be done on different layers. The thin film composite membranes are composed of three different layers, the top filtering active thin polyamide (PA) layer, supporting porous layer, and supporting fabric. Forward osmosis (FO) process is yet another energy efficient desalination process, but its efficiency is affected due to biofouling. Incorporation of GO enhance antibacterial properties leading to reduction of biofilm formation on the membrane surface. Pressure retarded osmosis (PRO) is an excellent process to generate clean energy from sea water and the biofouling of membrane is reduced by introduction of GO into the active layer of the TFC membrane. Different modifications on the membranes are being researched, each modification with its own advantages and disadvantages. In this review, modifications of nanofiltration membranes and their composites, characterization, and performances are discussed.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.18 no.2
• /
• pp.85-93
• /
• 2012

We study on the distribution characteristics of antifouling agents such as Sea-nine 211, Irgarol 1051, Diuron using HS-SPME method in southwestern coast of Korea. Short half-life of Sea-nine 211 was distributed in very low concentrations and/or below detection limits in all of the sampling points, both water and sediments samples. Irgarol 1051 was detected to have the highest concentration respectively $6.98{\mu}g/L$, 28.50 ng/g-dry wt in the seawater and sediments, and regional distribution characteristics did not appeared. Strong bioaccumulation and long half-life of Diuron was distributed higher concentration than in all sampling point and was analyzed to have the highest concentration(3882.22 ng/g-dry wt) Mo7(Mokpo)'s sediment. Irgarol 1051 and Diuron distributed in the shipbuilding industry and ship marina are located just at the point to found in high concentrations. In addition, the distribution of the antifouling agent materials were lower in concentration than in inner bay to outter bay in sediments. Antifouling agent materials from these results were contaminated high potential from port and shipbuilding industry located in inner bay.

• Journal of the Korea Institute of Building Construction
• /
• v.5 no.2 s.16
• /
• pp.97-105
• /
• 2005

Concrete structures in the marine environment often deteriorate in the early stage of their service life because of contact with various aggressive conditions. In recent years, the researches on the concrete in the marine environment have been carried out to increase their service life. In this experimental study, the concrete specimens were prepared with various adding contents of inorganic antifouling agent$(0\~3.0wt\%)$ composed of some fluosilicate solution. For evaluation of the properties of concretes containing inorganic antifouling agent, various tests such as setting time, slump loss, compressive strength, water absorption rate, fleering and thawing resistance and SEM of concrete, were conducted. As the results, physical and chemical properties of concretes were improved with an adding of inorganic antifouling agent. From the results of various tests, the optimal adding contents of antifouling agent was $1.0wt\%$.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.103-103
• /
• 2012

크루즈 페리 선박의 인테리어 섬유 내장부품은 고도의 난연성과 내구성, 그리고 높은 수준의 감성과 심미적 기능을 만족하는 고기능성 소재로 구성된 섬유 복합체이다. 이는 화재, 전복 등 돌발 사고에 대하여 탑승자를 보호하고, 쾌적한 실내 분위기를 제공함으로서 안전운행을 유도하며, 높은 수준의 감성과 심미적 기능을 부여함으로서 품위와 가치를 증가시키는 기능이 있다. 난연기능이 부가된 난연사의 경우 복합가공 즉, 방오, 항균, 소취 기능을 추가 부여하게 되면 난연 기능이 급격히 저하되는 결정적인 단점이 있다. 이로 인해 가혹한 난연 성능이 요구되는 선박용 인테리어 섬유제품의 경우 그 규격을 만족하기란 쉽지 않기 때문에 원사제조에서부터 염색공정, 가공공정에 걸쳐 각 단위 공정별로 복합적으로 난연, 방오, 항균소취 기능들의 추가 보완이 필요한 실정이다. 또한 최근 사용자 입장에서는 용도에 따라 여러 가지 기능이 복합된 원단을 요구하는 사례가 많아지고 있는 실정이며, 많은 후가공 공정시 난연가공과 더불어 복합적으로 추가 가공시 난연성 저하 등의 문제가 있다. 본 연구에서는 선박용 인테리어 섬유제품의 Spec.을 만족시키기 위해 난연 직물의 염색 후가공에 적용되는 염조제 성능을 조사하고 고견뢰 및 균염을 만족하는 난연 내광 등의 복합기능성을 확보하기 위한 기초기술을 검토하였다.

• Journal of the Korean Applied Science and Technology
• /
• v.29 no.1
• /
• pp.19-32
• /
• 2012

Pharmaceutical use accounts for a great part of articles and papers on crosslinking of polymers. Crosslinking of polymers used for tissue engineering and drug delivery respects non-cytotoxicity and in situ gelling. The crosslinking of polymers is aimed not only at the improvement of modulus, chemical resistance, and thermal resistance, but also at endowing them with such functions as metal adsorption, antifouling, and ion exchange via crosslinked segments. Smart polymers responding to environmental change, and cosslinking mediated by light, enzyme, natural compound and in aqueous medium in consideration of environment are being studied. Developing new polymeric materials is essential along with the pharmaceutics aiming at the longevity of 120 years old. Functionalization and property adjustment of polymers through crosslinking will be done more delicately. Hydrogels will be focused on injectable and in situ gel forming. In the coating industry crosslinking system with low non-toxicity and low energy consumption will be developed in consideration of workers and environment.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.16 no.2
• /
• pp.82-87
• /
• 2013

Effects of material surface property, hydrophobic or hydrophilic, on the bio-fouling occurred on the bodies submerged in the sea water are investigated experimentally. 4 test models are used in the experiment, which includes aluminum foil in common use, AAO applied hydrophobic surface, HDFS coated hydrophobic surface and hydrophilic surface. Hydrophobic surfaces with numerous micro & nano-scale pillars on it seems to play very important role of preventing them from fouling in initial stage while the effects disappear in long term sense of fouling process. It is concluded that the surface hydrophobicity retards the initial fouling until the fouling thickness is smaller than the heights of the pillars on it but the effects diminish with the fouling proceeds so that the thickness grows bigger than the pillar heights.