• Journal of the korean academy of Pediatric Dentistry
• /
• v.40 no.2
• /
• pp.98-105
• /
• 2013

The purpose of this study was to investigate the mesiodistal widths at the cervical level of primary second molars in Korean children, and to compare them with commercial rubber dam clamps commonly used in pediatric dentistry. Dental casts of 115 primary and mixed dentition children were studied. Cervical mesiodistal width (C-MD) was measured at the clinical cervical level of each primary second molar from buccal and lingual sides using a digital caliper (Absolute, Mitutoyo, Kawasaki, Japan). The data were compared with mesiodistal widths of rubber dam clamps #203/204, #10/11, and #205 (Dentech, Japan). C-MDs of primary mandibular second molars were larger than those of primary maxillary second molars, and C-MDs at buccal sides were larger than those of lingual sides. All C-MDs showed statistically significant discrepancies to corresponding widths on clamps (p < 0.05). However the amount of discrepancy was mild in maxillary teeth, while up to 1 mm of discrepancy was shown in mandibular teeth. In conclusion, C-MDs measured in this study imply a relatively fair fit of #10/#11 or #203/#204 clamps on primary maxillary second molars, while suggesting our need for a better clamp with proper size for primary mandibular second molars.

• Korean Journal of Food Science and Technology
• /
• v.31 no.6
• /
• pp.1557-1562
• /
• 1999

As a series of studies on the preservation methods for boiled-dried anchovies, determination of sorption properties and shelf-life prediction were made for the samples. Dried anchovies, which were gamma-irradiated at pre-established dose (5 kGy) after packaging in both a polyethylene film (PE, 0.1 mm) and a laminated film $(nylon\;15\;{\mu}m/polyethylene\;100\;{\mu}m,\;NY/PE)$, were subjected to a quality evaluation during 4 months at different storage conditions, such as $15^{\circ}C/68%\;RH,\;25{\circ}C/75%\;RH,\;and\;35^{\circ}C/84%$ RH. The sample showed 5.47% of BET monomolecular layer moisture content and the corresponding water activity, 0.15. The velocity constants of browning reaction and organoleptic changes in the sample were in proportion to storage temperature, and $Q_{10}$, values were ranged from 2.17 to 2.40 in a given packaging and irradiation conditions. In the shelf-life prediction of the stored sample at $25^{\circ}C$, non-irradiated groups packaged in PE and NY/PE were 84 days and 125 days. While 5 kGy-irradiated groups in the same packaging were 126 days and 138 days, respectively. This finding proved the efficacy of laminated-film packaging and irradiation treatment in preserving the quality of dried anchovies.

• Applied Biological Chemistry
• /
• v.11
• /
• pp.123-130
• /
• 1969

Five varieties of sweetpotatoes recommended in Korea were investigated with respect to the storing capacity, resin content and the possibility of developing sweetpotato chips as a new processed food item. The results are summarized as follows: 1) Two varieties, Suwon No. 147 and Chun-Mi were more resistant to chilling injury and soft-rot decay than other varieties. 2) The contents of resinous and polyphenolic substances were quite different depending upon the variety. 3) Sweetpotato chips of different color were made from different varieties and rapeseed oil was found to be the best as frying oil. 4) Best conditions to prepare sweetpotato chips with fresh color and proper texture were to dip slices of 1-2 mm thickness in 0.25% sodium bisulfite solution at $40^{\circ}C$ for 30-40 minutes and to subject to deep frying in an oil bath at $150-160^{\circ}C$ for 2.5 to 3.5 minutes. 5) Polyethylene-cellophane film as packing material of sweetpotato chips was the film in the moisture proof and film-impact tests.

• Restorative Dentistry and Endodontics
• /
• v.19 no.1
• /
• pp.124-134
• /
• 1994

The shade of restorative materials is very important for successful restoration esthetically harmonized with the natural tooth. The purpose of this study was to evaluate the color stability and the opacity change of conventional chemical setting and visible light curing glass-ionomer cements for restorative esthetic filling. Specimens of each brand (GC Fuji II and Fuji II LC) were uniformly prepared and divided into three groups: In group l(control group), the specimens received no surface treatment; in group 2, the specimens were coated with varnish and the excess gently blown off; and in group 3. the specimens were coated with light-cured bonding resin and irradiated by a visible light curing unit for 20 seconds on both sides. All specimens were stored in distilled water at $37^{\circ}C$ and checked after for 24 hours. 2 months. 4 months, 6 months. and 8 months. The color characteristics($L^*,\;a^*,\;b^*$) and the opacity(Y%) of all the samples were measured by a spectrocolorimeter and the total color differences(${\Delta}E^*$) and opacity changes(${\Delta}Y%$) were computed. The following results were obtained : 1. The total tolor differences in all groups increased with time. 2. The total color differences of the LC groups after immersion for 8 months in distilled water at $37^{\circ}C$ were lower than those of GC groups(p<0.01), and the total color differences of the varnish or the light-cured bonding resin coated groups were lower than those of the control group with glass-ionomer cements which had no surface treatment(p<0.01). 3. In all groups the translucency decreased with time. 4. In the control group and the varnish coating group. the opacity changes of the GC groups were lower than those of the LC groups(p<0.01) and in the light-cured bonding resin coated group, there was no significant difference between the GC group and the LC group. 5. The opacity changes of the varnish or the light-cured bonding resin coated groups were lower than those of the control group(p<0.01). These results suggest that color change and opacity of conventional chemical setting and light cured glass-ionomer cement were increased with time, and the color changes and the opacity changes of a control group after immersion for 8 months in distilled water at $37^{\circ}C$ were greater than those of the varnish or the light-cured bonding resin coated groups.

• Korean Journal of Heritage: History & Science
• /
• v.46 no.3
• /
• pp.194-210
• /
• 2013

Oiled paper (Yuji, 油紙) is an oil impregnated paper which was one of the daily necessities in Korea. As there has not been any accurate research on this subject, this study examined the literature from the Joseon Dynasty to study its origin, nomenclature, usage and production process. Goryeodogyeong (高麗圖經) and Goryeosa (高麗史) allowed the estimation that the origin of oiled paper was the Goryeo Dynasty, but the records of oil and paper in Samguksagi (三國史記) and Nihon Shoki (日本書紀) indicate the possibility that the production of oiled paper can be traced back to the 7th Century. The nomenclature and the usage of oiled paper in the Joseon Dynasty were examined through the Annals of Joseon Dynast (朝鮮王朝實錄), Ilseongnok (日省錄) and Seungjeongwonilgi (承政院日記), while the Royal Protocols of the Joseon Dynasty (Uigwe, 儀軌) and Takjijunjeol (度支準折) together with other literature were examined for its market value, use and materials. The literature from the Joseon Dynasty indicate that oiled paper was used for various everyday commodities with its waterproof, damp-proof and transparent properties and called in various ways according to its use and production process. This study studied the literature on oiled paper from the Joseon Dynasty, but the studies on the restoration of traditional oiled paper are still needed. Therefore, it would be necessary to study the traditional oiled papers in combination with the study of oiled paper relics, the reproduction of traditional oiled paper samples, and the case study of the papermaking masters who have been producing the traditional oiled papers.

• Journal of Korea Water Resources Association
• /
• v.48 no.8
• /
• pp.613-623
• /
• 2015

To overcome the difficulties of discharge measurements during flood season, MWSCM(micowave water surface current meter) which measures river surface velocities without contacting water has been applied in field work since its development. The existing version of MWSCM is for floods so that its applicability is low due to the short periods of floods. Therefore the renovative redesign of MWSCM to increase the applicability was conducted so that it can be applied to the discharge measurements during normal flows as well as flood ones by extending the measurable range of velocity. A newly developed high-performance MWSCM for general use can measure the velocity range of 0.03-20.0 m/s from flood flows to normal flows, whereas MWSCM for floods can measure the velocity range of 0.5-10.0 m/s. The improvement of antenna isolation between transmitter and receiver to block the inflow of transmitted singals to receiver and the improvement of phase noise of oscillator are necessary for detecting low velocity with MWSCM technology. Separate type antenna of transmitting and receiving signals is developed for isolation enhancement and phase locked loop synthesizer as an oscillator is applied to high-performance MWSCM for general use. Microwave frequency of 24 GHz is applied to the new MWSCM rather than 10 GHz to make the new MWSCM small and light for convenient use of it at fields. Improvement requests on MWSCM for floods-stable velocity measurement, self test, low power consumtion, and waterproof and dampproof-from the users of it has been reflected on the development of the new version of MWSCM.

• Journal of dental hygiene science
• /
• v.15 no.3
• /
• pp.272-279
• /
• 2015

This study was conducted to provide baseline data which could suggest a direction of role based efficient integrated clinical education by avoiding duplicate of contents through analyzing clinical courses. Among the 7 clinical courses, orthodontics and periodontology were the most published subjects which were published in 5 kinds of books and dental materials was the least published subject which was published in 2 kinds of books on investigation of overlapping contents based on titles that appeared on chapters and verses of all textbooks for clinical courses. Dental implant was covered in 4 subjects such as oral maxillofacial surgery, prosthodontics, periodontology and dental materials which was the most number. Other overlapping contents were restoration treatment, occlusion and malocclusion, temporomandibular joint diseases, anesthesia sedation, tooth trauma, systemic disease and dental treatment, dental casting, isolation techniques, tooth bleaching, pulp protection, gingivitis periodontitis, tooth development, etc. Reviews of textbooks of clinical courses should be conducted in a detailed manner by systematic, various studies in order to improve quality of the textbooks.

• Korean Journal of Food Science and Technology
• /
• v.13 no.4
• /
• pp.314-318
• /
• 1981

In order to improve the storage stability of spray and freeze dried red ginseng extract powder packed in a bottle, the water vapor permeability of Al-foil laminate paper used for cap closure and shelf life of those products on various storage temperatures and relative humidities were investigated. The thickness of the laminate paper was $93{\pm}3\:{\mu}m$ and its physical properties were equal to standard of ASTM (B-377-66) The absorption rate of the freeze dried powder was 2-6 times greater than that of the spray dried powder at $37^{\circ}C$. Therefore it was considered that the laminate could be used for cap closures for the spray dried powder but unsuitable for the freeze dried powder. The shelf life of the spray dried powder was longer than that of the freeze-dried powder at $37^{\circ}C$.

• Korean Journal of Heritage: History & Science
• /
• v.56 no.4
• /
• pp.40-52
• /
• 2023

The basic purpose of building material called tiles is waterproofing and damp proofing, and they were restricted to use on important buildings to symbolize authority. This is especially true during the Three Kingdoms period, although unearthed examples are rare. Most of these tiles are found in ruins in the Silla and Baekje regions. Tiles were excavated from the Buwon-dong ruins that show the oldest manufacturing technique in the Gaya region to date, and tiles from the early Three Kingdoms period were recently excavated from the Gimhae Bonghwang-dong ruins, which is presumed to be the site of the royal palace of Geumgwan Gaya. These are important materials that show the appearance of tiles from the early days of Gimhae, the ancient capital of Geumgwan Gaya. The tiles excavated from the Bonghwang-dong ruins are reddish-yellow because a small amount of sand was mixed in the tile material and baked at a low temperature. The tiles are thin, no traces of fabric were identified, but traces of clay bands were identified. Tapping tool marks and traces of an anvil used in pottery production are clearly observed on the inside and outside, indicating that the tiles were made in the same way as earthenware manufacturing methods. If this is connected to the genealogy of the potters who made Gaya earthenware, it is estimated that tiles and earthenware were produced together as in the Songrim-ri ruins in Bulo-dong, Incheon, Songgok-dong ruins in Gyeongju, and Mulcheon-ri ruins. To date, tiles excavated from the Gimhae area have been identified only in places believed to be the Geumgwan Gaya City Wall (Royal Palace) in the Gimhae Basin. Considering what has been recorded so far and the geographical scenery, the Bonghwang-dong remains are the only city wall candidate site, and this is clearly revealed through the existence of the excavated tiles, which proves this. Considering that a small number of tiles were excavated during this time, it is estimated that the role of tiles as a luxury product with a symbolic meaning was greater than that of roofing materials, and there were strict restrictions and controls on its use.

• Journal of the Korean Wood Science and Technology
• /
• v.10 no.3
• /
• pp.13-44
• /
• 1982

1. Since long time ago, it has been talked about that soaking wood into water for a long time would be profitable for the decreasing of defects such as checking, cupping and bow due to the undue-shrinking and swelling. There are, however, no any actual data providing this fact definitly, although there are some guesses that water soluble extractives might effect on this problem. On the other hand, this is a few work which has been done about the effect of water soluble extractives upon the some physical properties of wood and that it might be related to the above mentioned problem. If man does account for that whether soaking wood into water for a long time would be profitable for the decreasing of defects due to the undue-shrinking and swelling in comparison with unsoaking wood or not, it may bring a great contribution on the reasonable uses of wood. To account for the effect of water soluble extractives upon physical properties of wood, this study has been made at the wood technology laboratory, School of Forestry, Yale university, under competent guidance of Dr. F. F. Wangaard, with the following three different species which had been provided at the same laboratory. 1. Pinus strobus 2. Quercus borealis 3. Hymenaea courbaril 2. The physical properties investigated in this study are as follows. a. Equilibrium moisture content at different relative humidity conditions. b. Shrinkage value from gre condition to different relative humidity conditions and oven dry condition. c. Swelling value from oven dry condition to different relative humidity conditions. d. Specific gravity 3. In order to investigate the effect of water soluble extractives upon physical properties of wood, the experiment has been carried out with two differently treated specimens, that is, one has been treated into water and the other into sugar solution, and with controlled specimens. 4. The quantity of water soluble extractives of each species and the group of chemical compounds in the extracted liquid from each species have shown in Table 36. Between species, there is some difference in quantity of extractives and group of chemical compounds. 5. In the case of equilibrium moisture contents at different relative humidity condition, (a) Except the desorption case at 80% R. H. C. (Relative Humidity Condition), there is a definite line between untreated specimens and treated specimens that is, untreated specimens hold water more than treated specimens at the same R.H.C. (b) The specimens treated into sugar solution have shown almost the same tendency in results compared with the untreated specimens. (c) Between species, there is no any definite relation in equilibrium moisture content each other, however E. M. C. in heartwood of pine is lesser than in sapwood. This might cause from the difference of wood anatomical structure. 6. In the case of shrinkage, (a) The shrinkage value of the treated specimen into water is more than that of the untreated specimens, except anyone case of heartwood of pine at 80% R. H. C. (b) The shrinkage value of treated specimens in the sugar solution is less than that of the others and has almost the same tendency to the untreated specimens. It would mean that the penetration of some sugar into the wood can decrease the shrinkage value of wood. (c) Between species, the shrinkage value of heartwood of pine is less than sapwood of the same, shrinkage value of oak is the largest, Hymenaea is lesser than oak and more than pine. (d) Directional difference of shrinkage value through all species can also see as other all kind of species previously tested. (e) There is a definite relation in between the difference of shrinkage value of treated and untreated specimens and amount of extractives, that is, increasing extractives gives increasing the difference of shrinkage value between treated and untreated specimens. 7. In the case of swelling, (a) The swelling value of treated specimens is greater than that of the untreated specimens through all cases. (b) In comparison with the tangential direction and radial direction, the swelling value of tangential direction is larger than that of radial direction in the same species. (c) Between species, the largest one in swelling values is oak and the smallest pine heartwood, there are also a tendency that species which shrink more swell also more and, on the contrary, species which shrink lesser swell also lesser than the others. 8. In the case of specific gravity, (a) The specific gravity of the treated specimens is larger than that of untreated specimens. This reversed value between treated and untreated specimens has been resulted from the volume of specimen of oven dry condition. (b) Between species, there are differences, that is, the specific gravity of Hymenaea is the largest one and the sapwood of pine is the smallest. 9. Through this investigation, it has been concluded that soaking wood into plain water before use without any special consideration may bring more hastful results than unsoaking for use of wood. However soaking wood into the some specially provided solutions such as salt water or inorganic matter may be dissolved in it, can be profitable for the decreasing shrinkage and swelling, checking, shaking and bow etc. if soaking wood into plain water might bring the decreasing defects, it might come from even shrinking and swelling through all dimension.