• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1999.12a
• /
• pp.456-461
• /
• 1999

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• v.10 no.1
• /
• pp.226-231
• /
• 2005

• Korean Journal of Food Science and Technology
• /
• v.39 no.2
• /
• pp.158-163
• /
• 2007

In this study, we prepared curdlan composite films and determined their properties in order to select the most appropriate setting methods, moisture barrier materials, and viscoelasticity enhancing materials. High set curdlan films with polyethylene glycol (PEG) showed higher tensile strength and moisture barrier properties than low set films. Films with oleic acid as a moisture barrier material had greater tensile strength, elongation and moisture barrier properties than films with acetylated monoglyceride (AMG). Lastly, films using polyisobutylene (PIB) as a viscoelasticity enhancing material showed higher elongation than films with polybutene (PB).

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.33 no.4
• /
• pp.15-20
• /
• 2001

The function of the moisture-proof paper is to prevent moisture from adsorbing into the packed goods. Water-vapor transmission rate of the moisture-proof paper should be less than 100g/$m^2$.24hr and the optimum rate would be less than 50g/$m^2$.24hr. In general the moisture-proof paper has been made by laminating polyethylene or polypropylene on top of the base paper. However this kind of moisture-proof paper has a problem in recycling so that it brings about environmental pollution. In general the moisture-proof paper has been made by laminating polyethylene or polypropylene on top of the base paper. However this kind of moisture-proof paper has a problem in recycling so that it brings about environmental pollution. The purpose of this paper was to make moisture-proof paper using the mixture of SB latex and wax emulsion which was recyclable and environmentally friendly. Water vapor transmission rate showed less than 50g/$m^2$.24hr in mixture ratio of 85:15, 87:13, 90:10. Especially the mixture ratio of 87:13 showed the most favorable water-vapor transmission rate. However, the moisture-proof layer was destroyed slightly by folding in packing. It has been observed that there was no close relationship between water-vapor transmission rate of the moisture-proof paper and grammage of the base paper, but the density of base paper had influenced on water vapor transmission rate. It was also observed that the moisture-proof paper could be recycled. The moisture-proof paper was similar to base paper in degree of the pulping, and there was no significant difference in dispersion between moisture-proof paper and base paper. Most of wax particles which caused the spots during drying process could be removed by flotation process. Tensile strength and tear strength of both moisture-proof paper and base paper after pulping were measured to examine the fiber bonding, and no significant difference in physical properties was observed.

• Journal of the Korean Chemical Society
• /
• v.23 no.5
• /
• pp.329-337
• /
• 1979

The water-vapour transmission ratios (WVTR) of the various commercial polymer films have been investigated at the constant pressure and relative humidity (RH). Water proofnesses, the reciprocals of WVTR for the various samples, were determined using a cup device and maintaining the sample films at a constant temperature ($40{\pm}1^{\circ}C$) and a constant R. H ($90{\pm}2%$) for 24 hours. The following order of the relative proofness was observed; oriented polypropyrene (O.PP) > high density polyethylene (HDPE, Inflation) > high density polyethylene (HDPE. T-die) > casted polypropylene (C. PP) > nonoriented polyester (N. PET) > low density polyethylene (LDPE) > oriented polyester (O. PET) > rigid polyvinyl chloride (Rigid PVC) > semirigid polyvinyl chloride (Semirigid PVC) > nonrigid polyvinyl chloride (Nonrigid PVC) > oriented nylon (O. Nylon) > nonoriented nylon (N. Nylon). And water proofness order was also observed to decrease with the temperature rising; HDPE (T-die) > C. PP > O. PET > LDPE > O. Nylon. The activation energies of LDPE, HDPE (T-die), C. PP, O. PET and O.Nylon films were 12.0, 11.1, 11.4, 11.7, 14.1 kcal/mole, respectively. The WVTR's of the films were increased with the polarity of polymer and the addition of plasticizer in PVC, decreased with the increase of the film thickness and mechanical orientation. The WVTR's of the laminated films O. PP/LDPE, N.Nylon/LDPE, C.PP/LDPE were also more dependent on the film thickness than the WVTR's of the single films.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2003.11a
• /
• pp.437-438
• /
• 2003

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2008.10a
• /
• pp.79-83
• /
• 2008

• Journal of Conservation Science
• /
• v.32 no.2
• /
• pp.167-178
• /
• 2016

Despite the size layer is an important part for conserving the artworks in the configuration of oil painting, the conservation scientific approaches of that have not been made yet. Therefore, this study produced standard samples on the basis of the analysis results of oil painting works, and carried out the evaluation of functions of the size layer materials. As a result of literature material, traditionally, animal glue was used for the size layer, whereas synthetic resin have been used in combination with animal glue since the modern age, in particular, it was identified that Polyvinyl Acetate(PVAc) was in general use. As a result of analysis of oil painting works, size layer was detected on the support and it was identified as animal glue. As a result of analysis based on Funaoka canvas for ground, it showed that the lead oxide and the titanium dioxide were the main constituents. On the basis of these results, standard samples were produced. As a result of evaluation on the functions of the size layer materials, in the case of the animal glue, stable result was observed in the shrinkag expansion rate, whereas slight weakness was observed in moisture proofing, color, and tensile strength, and dense cracks were found on surface. As for PVAc(A), moisture proofing, color, and the tensile strength exhibited stable results. Higher shrinkage rate was observed and the cracks with wide gaps were found on surface. As for PVAc(B), tensile strength, shrinkage expansion rate, and surface observation showed stable results, whereas moisture proofing property showed poor results. Different aspects were observed in each experiment, and this phenomena were considered to be due to the density and the adhesion properties between the hydrophilic and hydrophobic molecules in the size layer materials. The results are expected to be used as materials for the oil painting work conservation henceforth.

• Journal of the Korean Wood Science and Technology
• /
• v.10 no.2
• /
• pp.3-11
• /
• 1982

In order to investigate the annual mean equilibrium moisture content(EMC), the equilibrium moisture content investigated were the desorbed and adsorbed equilibrium moisture content with two end-matched samples for red pine (Pinus densiflora S. et Z.), Douglas fir (Pseadotsuga menziesii Franco), oak (Quercus mongolica Fischer) and red lauan (Shorea spp.) in instrument screen at forest experiment station located in Seoul, Chuncheon, Daejeon, Kyungju, Jinju and Gwangju area for four years (1970. 1 - 1973. 12). The results summarized were as follows. 1. The annual mean desorbed equilibrium moisture content of red pine, Douglar fir, oak and red lauan were 14.8, 13.7, 14.0 and 14.2 percent respectively and higher than the annual mean adsorbed equilibrium moisture content of those species. 2. The annual mean desorbed - and adsorbed equilibrium moisture content in central areas (Seoul, Chuncheon, Daejeon) were higher than those in southern areas (Kyungju, Jinju, Gwangju). 3. On the whole, the monthly mean desorbed - and adsorbed equilibrium moisture content were lowest in April and highest in August though difference of month in areas. 4. Average and range of annual national equilibrium moisture content was 12.3 ~ 14.2 ~ 15.7 percent for desorbed equilibrium moisture content and 11.3 ~ 13.2 ~ 14.7 percent for adsorbed equilibrium moisture content and 12.0 ~ 14.1 ~ 16.4 percent for calculated equilibrium moisture content based on tempera ture and humidity.

• Journal of the Korean Wood Science and Technology
• /
• v.10 no.3
• /
• pp.109-117
• /
• 1982

In order to investigate the annual mean equilibrium moisture content (EMC), the equilibrium moisture content investigated were the desorbed - and adsorbed equilibrium moisture content with two end-matched samples for red pine (Pinus densiflora S. et Z.), Douglas fir (Pseadotsuga menziesii Franco), oak (Quercus mongolica Fischer) and red lauan (Shorea spp.) in instrument screen at forest experiment station located in Seoul, Chuncheon, Daejeon, Kyungju, Jinju and Gwangju area for four years (1970. 1 - 1973. 12). The results summarized were as follows. 1. The annual mean desorbed equilibrium moisture content of red pine, Douglar fir, oak and red lauan were 14.8, 13.7, 14.0 and 14.2 percent respectively and higher than the annual mean adsorbed equilibrium moisture content of those species. 2. The annual mean desorbed - and adsorbed equilibrium moisture content in central areas (Seoul, Chuncheon, Daejeon) were higher than those in southern areas (Kyungju, Jinju, Gwangju). 3. On the whole, the monthly mean desorbed - and adsorbed equilibrium moisture content were lowest in April and highest in August though difference of month in areas. 4. Average and range of annual national equilibrium moisture content was 12.3 ~ 14.2 ~ 15.7 percent for desorbed equilibrium moisture content and 11.3 ~ 13.2 ~ 14.7 percent for adsorbed equilibrium moisture content and 12.0 ~ 14.1 ~ 16.4 percent for calculated equilibrium moisture content based on tempera.